include/configs/ds109.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011
   4  * Jason Cooper <u-boot@lakedaemon.net>
   5  *
   6  * Based on work by:
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Siddarth Gore <gores@marvell.com>
   9  */
  10
  11 #ifndef _CONFIG_DS109_H
  12 #define _CONFIG_DS109_H
  13
  14 /* Provide the MACH_TYPE value that the vendor kernel requires. */
  15 #define CONFIG_MACH_TYPE                527
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21
  22 /*
  23  * Commands configuration
  24  */
  25 #define CONFIG_CMD_EXT2
  26
  27 /*
  28  * mv-plug-common.h should be defined after CMD configs since it used them
  29  * to enable certain macros
  30  */
  31 #include "mv-plug-common.h"
  32
  33 /*
  34  *  Environment variables configurations
  35  */
  36 #ifdef CONFIG_SPI_FLASH
  37 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  38 #endif
  39
  40 #ifdef CONFIG_CMD_SF
  41 #define CONFIG_HARD_SPI                 1
  42 #define CONFIG_ENV_SPI_BUS              0
  43 #define CONFIG_ENV_SPI_CS               0
  44 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  45 #endif
  46
  47 /*
  48  * max 4k env size is enough, but in case of nand
  49  * it has to be rounded to sector size
  50  */
  51 #define CONFIG_ENV_SIZE                 0x10000
  52 #define CONFIG_ENV_ADDR                 0x3d0000
  53 #define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
  54
  55 /*
  56  * Default environment variables
  57  */
  58 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  59         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  60         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  61         "bootm 0x6400000;"
  62
  63 #define CONFIG_EXTRA_ENV_SETTINGS       \
  64         "x_bootcmd_ethernet=ping 192.168.1.2\0" \
  65         "x_bootcmd_usb=usb start\0"     \
  66         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  67         "x_bootargs=console=ttyS0,115200\0"     \
  68         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
  69         "ipaddr=192.168.1.5\0"
  70
  71 /*
  72  * Ethernet Driver configuration
  73  */
  74 #ifdef CONFIG_CMD_NET
  75 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
  76 #define CONFIG_PHY_BASE_ADR     8
  77 #endif /* CONFIG_CMD_NET */
  78
  79 /*
  80  * SATA Driver configuration
  81  */
  82 #ifdef CONFIG_MVSATA_IDE
  83 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  84 #endif /*CONFIG_MVSATA_IDE*/
  85
  86 #endif /* _CONFIG_DS109_H */