include/configs/ds109.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011
   4  * Jason Cooper <u-boot@lakedaemon.net>
   5  *
   6  * Based on work by:
   7  * Marvell Semiconductor <www.marvell.com>
   8  * Written-by: Siddarth Gore <gores@marvell.com>
   9  */
  10
  11 #ifndef _CONFIG_DS109_H
  12 #define _CONFIG_DS109_H
  13
  14 /* Provide the MACH_TYPE value that the vendor kernel requires. */
  15 #define CONFIG_MACH_TYPE                527
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21
  22 /*
  23  * Commands configuration
  24  */
  25 #define CONFIG_CMD_EXT2
  26
  27 /*
  28  * mv-plug-common.h should be defined after CMD configs since it used them
  29  * to enable certain macros
  30  */
  31 #include "mv-plug-common.h"
  32
  33 #ifdef CONFIG_CMD_DATE
  34 #define CONFIG_RTC_MV
  35 #endif /* CONFIG_CMD_DATE */
  36
  37 /*
  38  *  Environment variables configurations
  39  */
  40 #ifdef CONFIG_SPI_FLASH
  41 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64k */
  42 #endif
  43
  44 #ifdef CONFIG_CMD_SF
  45 #define CONFIG_HARD_SPI                 1
  46 #define CONFIG_ENV_SPI_BUS              0
  47 #define CONFIG_ENV_SPI_CS               0
  48 #define CONFIG_ENV_SPI_MAX_HZ           50000000 /* 50 MHz */
  49 #endif
  50
  51 /*
  52  * max 4k env size is enough, but in case of nand
  53  * it has to be rounded to sector size
  54  */
  55 #define CONFIG_ENV_SIZE                 0x10000
  56 #define CONFIG_ENV_ADDR                 0x3d0000
  57 #define CONFIG_ENV_OFFSET               0x3d0000 /* env starts here */
  58
  59 /*
  60  * Default environment variables
  61  */
  62 #define CONFIG_BOOTCOMMAND              "setenv ethact egiga0; " \
  63         "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
  64         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  65         "bootm 0x6400000;"
  66
  67 #define CONFIG_EXTRA_ENV_SETTINGS       \
  68         "x_bootcmd_ethernet=ping 192.168.1.2\0" \
  69         "x_bootcmd_usb=usb start\0"     \
  70         "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
  71         "x_bootargs=console=ttyS0,115200\0"     \
  72         "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
  73         "ipaddr=192.168.1.5\0"
  74
  75 /*
  76  * Ethernet Driver configuration
  77  */
  78 #ifdef CONFIG_CMD_NET
  79 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable one port */
  80 #define CONFIG_PHY_BASE_ADR     8
  81 #endif /* CONFIG_CMD_NET */
  82
  83 /*
  84  * SATA Driver configuration
  85  */
  86 #ifdef CONFIG_MVSATA_IDE
  87 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  88 #endif /*CONFIG_MVSATA_IDE*/
  89
  90 #endif /* _CONFIG_DS109_H */