include/configs/eXalion.h

   1 /*
   2  * (C) Copyright 2001
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /* ------------------------------------------------------------------------- */
  25
  26 /*
  27  * board/config.h - configuration options, board specific
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 /*
  34  * High Level Configuration Options
  35  * (easy to change)
  36  */
  37
  38 #define CONFIG_MPC824X          1
  39 /* #define CONFIG_MPC8240          1 */
  40 #define CONFIG_MPC8245          1
  41 #define CONFIG_EXALION          1
  42
  43 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  44
  45 #if defined (CONFIG_MPC8240)
  46     /* #warning  ---------- eXalion with MPC8240 --------------- */
  47 #elif defined (CONFIG_MPC8245)
  48     /* #warning  ++++++++++ eXalion with MPC8245 +++++++++++++++ */
  49 #elif defined (CONFIG_MPC8245) && defined (CONFIG_MPC8245)
  50 #error #### Both types of MPC824x defined (CONFIG_8240 and CONFIG_8245)
  51 #else
  52 #error #### Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
  53 #endif
  54 /* older kernels need clock in MHz newer in Hz */
  55                                         /* #define CONFIG_CLOCKS_IN_MHZ 1 */ /* clocks passsed to Linux in MHz      */
  56 #undef CONFIG_CLOCKS_IN_MHZ
  57
  58 #define CONFIG_BOOTDELAY        10
  59
  60
  61                                                     /*#define CONFIG_DRAM_SPEED       66   */ /* MHz                         */
  62
  63 /*
  64  * BOOTP options
  65  */
  66 #define CONFIG_BOOTP_BOOTFILESIZE
  67 #define CONFIG_BOOTP_BOOTPATH
  68 #define CONFIG_BOOTP_GATEWAY
  69 #define CONFIG_BOOTP_HOSTNAME
  70
  71
  72 /*
  73  * Command line configuration.
  74  */
  75 #include <config_cmd_default.h>
  76
  77 #define CONFIG_CMD_FLASH
  78 #define CONFIG_CMD_SDRAM
  79 #define CONFIG_CMD_I2C
  80 #define CONFIG_CMD_IDE
  81 #define CONFIG_CMD_FAT
  82 #define CONFIG_CMD_SAVEENV
  83 #define CONFIG_CMD_PCI
  84
  85
  86 /*-----------------------------------------------------------------------
  87  * Miscellaneous configurable options
  88  */
  89 #define CONFIG_SYS_LONGHELP             1       /* undef to save memory         */
  90 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt       */
  91 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
  92 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size    */
  93 #define CONFIG_SYS_MAXARGS              8       /* max number of command args   */
  94 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
  95 #define CONFIG_SYS_LOAD_ADDR            0x00100000      /* default load address         */
  96
  97 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  98
  99 #define CONFIG_MISC_INIT_R      1
 100
 101 /*-----------------------------------------------------------------------
 102  * Start addresses for the final memory configuration
 103  * (Set up by the startup code)
 104  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 105  */
 106 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 107 #define CONFIG_SYS_MAX_RAM_SIZE 0x10000000      /* 1 GBytes - initdram() will      */
 108                                              /* return real value.              */
 109
 110 #define CONFIG_SYS_RESET_ADDRESS        0xFFF00100
 111
 112 #undef  CONFIG_SYS_RAMBOOT
 113 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor       */
 114 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 115
 116 /*-----------------------------------------------------------------------
 117  * Definitions for initial stack pointer and data area
 118  */
 119 #define CONFIG_SYS_INIT_DATA_SIZE       128
 120
 121 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 122 #define CONFIG_SYS_INIT_RAM_SIZE        0x1000
 123 #define CONFIG_SYS_INIT_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_INIT_DATA_SIZE)
 124
 125 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 126 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 127
 128
 129 #if defined (CONFIG_MPC8240)
 130 #define CONFIG_SYS_FLASH_BASE       0xFFE00000
 131 #define CONFIG_SYS_FLASH_SIZE       (2 * 1024 * 1024)   /* onboard 2MByte flash     */
 132 #elif defined (CONFIG_MPC8245)
 133 #define CONFIG_SYS_FLASH_BASE       0xFFC00000
 134 #define CONFIG_SYS_FLASH_SIZE       (4 * 1024 * 1024)   /* onboard 4MByte flash     */
 135 #else
 136 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 137 #endif
 138
 139 #define CONFIG_ENV_IS_IN_FLASH  1
 140 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Size of one Flash sector */
 141 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE    /* Use one Flash sector for enviroment  */
 142 #define CONFIG_ENV_ADDR         0xFFFC0000
 143 #define CONFIG_ENV_OFFSET               0       /* starting right at the beginning  */
 144
 145 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024)    /* Reserve 128 kB for malloc()  */
 146
 147 #define CONFIG_SYS_ALT_MEMTEST          1       /* use real memory test     */
 148 #define CONFIG_SYS_MEMTEST_START        0x00004000      /* memtest works on         */
 149 #define CONFIG_SYS_MEMTEST_END          0x02000000      /* 0 ... 32 MB in DRAM      */
 150
 151 #define CONFIG_SYS_EUMB_ADDR            0xFC000000
 152
 153 /* #define CONFIG_SYS_ISA_MEM              0xFD000000 */
 154 #define CONFIG_SYS_ISA_IO               0xFE000000
 155
 156 /*-----------------------------------------------------------------------
 157  * FLASH organization
 158  */
 159 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* Max number of flash banks        */
 160 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* Max number of sectors per flash  */
 161
 162 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms) */
 163 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms) */
 164
 165 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE
 166 #define FLASH_BASE1_PRELIM      0
 167
 168
 169 /*-----------------------------------------------------------------------
 170  * FLASH and environment organization
 171  */
 172
 173 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant              */
 174 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver                */
 175 #define CONFIG_SYS_MAX_FLASH_SECT       64      /* max number of sectors on one chip    */
 176 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 177 #define CONFIG_SYS_FLASH_INCREMENT      0       /* there is only one bank               */
 178 #define CONFIG_SYS_FLASH_PROTECTION     1       /* use hardware protection              */
 179 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 180
 181
 182 /*-----------------------------------------------------------------------
 183  * PCI stuff
 184  */
 185 #define CONFIG_PCI              1       /* include pci support          */
 186 #undef  CONFIG_PCI_PNP
 187
 188 #define CONFIG_NET_MULTI        1       /* Multi ethernet cards support */
 189
 190 #define CONFIG_EEPRO100         1
 191
 192 #define PCI_ENET0_MEMADDR       0x80000000      /* Intel 82559ER */
 193 #define PCI_ENET0_IOADDR        0x80000000
 194 #define PCI_ENET1_MEMADDR       0x81000000      /* Intel 82559ER */
 195 #define PCI_ENET1_IOADDR        0x81000000
 196 #define PCI_ENET2_MEMADDR       0x82000000      /* Broadcom BCM569xx */
 197 #define PCI_ENET2_IOADDR        0x82000000
 198 #define PCI_ENET3_MEMADDR       0x83000000      /* Broadcom BCM56xx */
 199 #define PCI_ENET3_IOADDR        0x83000000
 200
 201 /*-----------------------------------------------------------------------
 202  * NS16550 Configuration
 203  */
 204 #define CONFIG_SYS_NS16550              1
 205 #define CONFIG_SYS_NS16550_SERIAL       1
 206
 207 #define CONFIG_CONS_INDEX       1
 208 #define CONFIG_BAUDRATE         38400
 209
 210 #define CONFIG_SYS_NS16550_REG_SIZE     1
 211
 212 #if (CONFIG_CONS_INDEX == 1)
 213 #define CONFIG_SYS_NS16550_CLK          1843200 /* COM1 only !  */
 214 #else
 215 #define CONFIG_SYS_NS16550_CLK ({ extern ulong get_bus_freq (ulong); get_bus_freq (0); })
 216 #endif
 217
 218 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + 0x3F8)
 219 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4500)
 220 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4600)
 221
 222 /*-----------------------------------------------------------------------
 223  * select i2c support configuration
 224  *
 225  * Supported configurations are {none, software, hardware} drivers.
 226  * If the software driver is chosen, there are some additional
 227  * configuration items that the driver uses to drive the port pins.
 228  */
 229 #define CONFIG_HARD_I2C         1       /* To enable I2C support        */
 230 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged               */
 231 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 232 #define CONFIG_SYS_I2C_SLAVE            0x7F
 233
 234 /*-----------------------------------------------------------------------
 235  * Low Level Configuration Settings
 236  * (address mappings, register initial values, etc.)
 237  * You should know what you are doing if you make changes here.
 238  */
 239 #define CONFIG_SYS_HZ                   1000
 240
 241 #define CONFIG_SYS_CLK_FREQ     33333333        /* external frequency to pll    */
 242 #define CONFIG_PLL_PCI_TO_MEM_MULTIPLIER  2     /* for MPC8240 only             */
 243
 244                                        /*#define CONFIG_133MHZ_DRAM      1 */ /* For 133 MHZ DRAM only !!!!!!!!!!!    */
 245
 246 #if defined (CONFIG_MPC8245)
 247 /* Bit-field values for PMCR2.                                                  */
 248 #if defined (CONFIG_133MHZ_DRAM)
 249 #define CONFIG_SYS_DLL_EXTEND           0x80    /* use DLL extended range - 133MHz only */
 250 #define CONFIG_SYS_PCI_HOLD_DEL 0x20    /* delay and hold timing - 133MHz only  */
 251 #endif
 252
 253 /* Bit-field values for MIOCR1.                                                 */
 254 #if !defined (CONFIG_133MHZ_DRAM)
 255 #define CONFIG_SYS_DLL_MAX_DELAY        0x04    /*  longer DLL delay line - 66MHz only  */
 256 #endif
 257 /* Bit-field values for MIOCR2.                                                 */
 258 #define CONFIG_SYS_SDRAM_DSCD           0x20    /* SDRAM data in sample clock delay     */
 259                                         /*      - note bottom 3 bits MUST be 0  */
 260 #endif
 261
 262 /* Bit-field values for MCCR1.                                                  */
 263 #define CONFIG_SYS_ROMNAL               7       /*rom/flash next access time            */
 264 #define CONFIG_SYS_ROMFAL              11       /*rom/flash access time                 */
 265
 266 /* Bit-field values for MCCR2.                                                  */
 267 #define CONFIG_SYS_TSWAIT               0x5     /* Transaction Start Wait States timer  */
 268 #if defined (CONFIG_133MHZ_DRAM)
 269 #define CONFIG_SYS_REFINT               1300    /* no of clock cycles between CBR       */
 270 #else  /* refresh cycles */
 271 #define CONFIG_SYS_REFINT               750
 272 #endif
 273
 274 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.                */
 275 #if defined (CONFIG_133MHZ_DRAM)
 276 #define CONFIG_SYS_BSTOPRE              1023
 277 #else
 278 #define CONFIG_SYS_BSTOPRE              250
 279 #endif
 280
 281 /* Bit-field values for MCCR3.                                                  */
 282 /* the following are for SDRAM only                                             */
 283
 284 #if defined (CONFIG_133MHZ_DRAM)
 285 #define CONFIG_SYS_REFREC               9       /* Refresh to activate interval         */
 286 #else
 287 #define CONFIG_SYS_REFREC               5       /* Refresh to activate interval         */
 288 #endif
 289 #if defined (CONFIG_MPC8240)
 290 #define CONFIG_SYS_RDLAT                2       /* data latency from read command       */
 291 #endif
 292
 293 /* Bit-field values for MCCR4.  */
 294 #if defined (CONFIG_133MHZ_DRAM)
 295 #define CONFIG_SYS_PRETOACT             3       /* Precharge to activate interval       */
 296 #define CONFIG_SYS_ACTTOPRE             7       /* Activate to Precharge interval       */
 297 #define CONFIG_SYS_ACTORW               5       /* Activate to R/W                      */
 298 #define CONFIG_SYS_SDMODE_CAS_LAT       3       /* SDMODE CAS latency                   */
 299 #else
 300 #if 0
 301 #define CONFIG_SYS_PRETOACT             2       /* Precharge to activate interval       */
 302 #define CONFIG_SYS_ACTTOPRE             3       /* Activate to Precharge interval       */
 303 #define CONFIG_SYS_ACTORW               3       /* Activate to R/W                      */
 304 #define CONFIG_SYS_SDMODE_CAS_LAT       2       /* SDMODE CAS latency                   */
 305 #endif
 306 #define CONFIG_SYS_PRETOACT             2       /* Precharge to activate interval       */
 307 #define CONFIG_SYS_ACTTOPRE             5       /* Activate to Precharge interval       */
 308 #define CONFIG_SYS_ACTORW               3       /* Activate to R/W                      */
 309 #define CONFIG_SYS_SDMODE_CAS_LAT       3       /* SDMODE CAS latency                   */
 310 #endif
 311 #define CONFIG_SYS_SDMODE_WRAP          0       /* SDMODE wrap type                     */
 312 #define CONFIG_SYS_SDMODE_BURSTLEN      2       /* SDMODE Burst length 2=4, 3=8         */
 313 #define CONFIG_SYS_REGDIMM              0
 314 #if defined (CONFIG_MPC8240)
 315 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER   0
 316 #elif defined (CONFIG_MPC8245)
 317 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER   1
 318 #define CONFIG_SYS_EXTROM                   0
 319 #else
 320 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 321 #endif
 322
 323
 324 /*-----------------------------------------------------------------------
 325  memory bank settings
 326  * only bits 20-29 are actually used from these vales to set the
 327  * start/end address the upper two bits will be 0, and the lower 20
 328  * bits will be set to 0x00000 for a start address, or 0xfffff for an
 329  * end address
 330  */
 331 #define CONFIG_SYS_BANK0_START          0x00000000
 332 #define CONFIG_SYS_BANK0_END            (CONFIG_SYS_MAX_RAM_SIZE - 1)
 333 #define CONFIG_SYS_BANK0_ENABLE 1
 334 #define CONFIG_SYS_BANK1_START          0x3ff00000
 335 #define CONFIG_SYS_BANK1_END            0x3fffffff
 336 #define CONFIG_SYS_BANK1_ENABLE 0
 337 #define CONFIG_SYS_BANK2_START          0x3ff00000
 338 #define CONFIG_SYS_BANK2_END            0x3fffffff
 339 #define CONFIG_SYS_BANK2_ENABLE 0
 340 #define CONFIG_SYS_BANK3_START          0x3ff00000
 341 #define CONFIG_SYS_BANK3_END            0x3fffffff
 342 #define CONFIG_SYS_BANK3_ENABLE 0
 343 #define CONFIG_SYS_BANK4_START          0x00000000
 344 #define CONFIG_SYS_BANK4_END            0x00000000
 345 #define CONFIG_SYS_BANK4_ENABLE 0
 346 #define CONFIG_SYS_BANK5_START          0x00000000
 347 #define CONFIG_SYS_BANK5_END            0x00000000
 348 #define CONFIG_SYS_BANK5_ENABLE 0
 349 #define CONFIG_SYS_BANK6_START          0x00000000
 350 #define CONFIG_SYS_BANK6_END            0x00000000
 351 #define CONFIG_SYS_BANK6_ENABLE 0
 352 #define CONFIG_SYS_BANK7_START          0x00000000
 353 #define CONFIG_SYS_BANK7_END            0x00000000
 354 #define CONFIG_SYS_BANK7_ENABLE 0
 355
 356 /*-----------------------------------------------------------------------
 357  * Memory bank enable bitmask, specifying which of the banks defined above
 358  are actually present. MSB is for bank #7, LSB is for bank #0.
 359  */
 360 #define CONFIG_SYS_BANK_ENABLE          0x01
 361
 362 #if defined (CONFIG_MPC8240)
 363 #define CONFIG_SYS_ODCR         0xDF    /* configures line driver impedances,   */
 364                                         /* see 8240 book for bit definitions    */
 365 #elif defined (CONFIG_MPC8245)
 366 #if defined (CONFIG_133MHZ_DRAM)
 367 #define CONFIG_SYS_ODCR         0xFE    /* configures line driver impedances - 133MHz   */
 368 #else
 369 #define CONFIG_SYS_ODCR         0xDE    /* configures line driver impedances - 66MHz    */
 370 #endif
 371 #else
 372 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 373 #endif
 374
 375 #define CONFIG_SYS_PGMAX                0x32    /* how long the 8240 retains the        */
 376                                         /* currently accessed page in memory    */
 377                                         /* see 8240 book for details            */
 378
 379 /*-----------------------------------------------------------------------
 380  * Block Address Translation (BAT) register settings.
 381  */
 382 /* SDRAM 0 - 256MB */
 383 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 384 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 385
 386 /* stack in DCACHE @ 1GB (no backing mem) */
 387 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
 388 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 389
 390 /* PCI memory */
 391 #define CONFIG_SYS_IBAT2L       (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 392 #define CONFIG_SYS_IBAT2U       (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 393
 394 /* Flash, config addrs, etc */
 395 #define CONFIG_SYS_IBAT3L       (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
 396 #define CONFIG_SYS_IBAT3U       (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
 397
 398 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 399 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 400 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 401 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 402 #define CONFIG_SYS_DBAT2L       CONFIG_SYS_IBAT2L
 403 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 404 #define CONFIG_SYS_DBAT3L       CONFIG_SYS_IBAT3L
 405 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 406
 407
 408 /*-----------------------------------------------------------------------
 409  * Cache Configuration
 410  */
 411 #define CONFIG_SYS_CACHELINE_SIZE       32
 412 #if defined(CONFIG_CMD_KGDB)
 413 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 414 #endif
 415
 416 /* values according to the manual */
 417 #define CONFIG_DRAM_50MHZ       1
 418 #define CONFIG_SDRAM_50MHZ
 419
 420 #undef  NR_8259_INTS
 421 #define NR_8259_INTS            1
 422
 423 /*-----------------------------------------------------------------------
 424  * IDE/ATA stuff
 425  */
 426 #define CONFIG_SYS_IDE_MAXBUS       1   /* max. 2 IDE busses    */
 427 #define CONFIG_SYS_IDE_MAXDEVICE   (CONFIG_SYS_IDE_MAXBUS*1)    /* max. 2 drives per IDE bus */
 428
 429 #define CONFIG_SYS_ATA_BASE_ADDR   CONFIG_SYS_ISA_IO    /* base address */
 430 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0       /* ide0 offste */
 431 #define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170       /* ide1 offset */
 432 #define CONFIG_SYS_ATA_DATA_OFFSET 0    /* data reg offset  */
 433 #define CONFIG_SYS_ATA_REG_OFFSET  0    /* reg offset */
 434 #define CONFIG_SYS_ATA_ALT_OFFSET  0x200        /* alternate register offset */
 435
 436 #define CONFIG_ATAPI
 437
 438 #undef  CONFIG_IDE_8xx_DIRECT   /* no pcmcia interface required */
 439 #undef  CONFIG_IDE_LED          /* no led for ide supported     */
 440 #undef  CONFIG_IDE_RESET        /* reset for ide supported...    */
 441 #undef  CONFIG_IDE_RESET_ROUTINE        /* with a special reset function */
 442
 443 /*-----------------------------------------------------------------------
 444  * DISK Partition support
 445  */
 446 #define CONFIG_DOS_PARTITION
 447
 448 /*-----------------------------------------------------------------------
 449  * For booting Linux, the board info and command line data
 450  * have to be in the first 8 MB of memory, since this is
 451  * the maximum mapped by the Linux kernel during initialization.
 452  */
 453 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 454
 455 #endif /* __CONFIG_H */