include/configs/ep7312.h

   1 /*
   2  * (C) Copyright 2000
   3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   4  * Marius Groeger <mgroeger@sysgo.de>
   5  *
   6  * Configuation settings for the EP7312 board.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 #ifndef __CONFIG_H
  28 #define __CONFIG_H
  29
  30 /*
  31  * High Level Configuration Options
  32  * (easy to change)
  33  */
  34 #define CONFIG_ARM7             1       /* This is a ARM7 CPU   */
  35 #define CONFIG_EP7312           1       /* on an EP7312 Board      */
  36 #define CONFIG_ARM_THUMB        1       /* this is an ARM720TDMI */
  37 #undef  CONFIG_ARM7_REVD                /* disable ARM720 REV.D Workarounds */
  38
  39 #undef CONFIG_USE_IRQ                   /* don't need them anymore */
  40
  41 /*
  42  * Size of malloc() pool
  43  */
  44 #define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
  45 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
  46
  47 /*
  48  * Hardware drivers
  49  */
  50 #define CONFIG_DRIVER_CS8900    1       /* we have a CS8900 on-board */
  51 #define CS8900_BASE             0x20000000
  52 #define CS8900_BUS16            1
  53 #undef  CS8900_BUS32
  54
  55 /*
  56  * select serial console configuration
  57  */
  58 #define CONFIG_SERIAL1          1       /* we use Serial line 1 */
  59
  60 /* allow to overwrite serial and ethaddr */
  61 #define CONFIG_ENV_OVERWRITE
  62
  63 #define CONFIG_BAUDRATE         9600
  64
  65 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
  66
  67 #define CONFIG_COMMANDS         (CONFIG_CMD_DFL | CFG_CMD_JFFS2)
  68
  69 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
  70 #include <cmd_confdefs.h>
  71
  72 #define CONFIG_BOOTDELAY        3
  73 #define CONFIG_BOOTARGS         "devfs=mount root=ramfs console=ttyS0,9600"
  74 #define CONFIG_ETHADDR  08:00:3e:21:c7:f7
  75 /*#define CONFIG_NETMASK        255.255.0.0     */
  76 /*#define CONFIG_IPADDR         172.22.2.128    */
  77 /*#define CONFIG_SERVERIP       172.22.2.126    */
  78 /*#define CONFIG_BOOTFILE       "impa7" */
  79 #define CONFIG_BOOTCOMMAND      "bootp;bootm"
  80
  81 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
  82 #define CONFIG_KGDB_BAUDRATE    230400          /* speed to run kgdb serial port */
  83 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
  84 #endif
  85
  86 /*
  87  * Miscellaneous configurable options
  88  */
  89 #define CFG_LONGHELP                            /* undef to save memory         */
  90 #define CFG_PROMPT              "EP7312 # "     /* Monitor Command Prompt       */
  91 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
  92 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
  93 #define CFG_MAXARGS             16              /* max number of command args   */
  94 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
  95
  96 #define CFG_MEMTEST_START       0xc0400000      /* memtest works on     */
  97 #define CFG_MEMTEST_END         0xc0800000      /* 4 ... 8 MB in DRAM   */
  98
  99 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 100
 101 #define CFG_LOAD_ADDR           0xc0500000      /* default load address */
 102
 103 #define CFG_HZ                  2000            /* decrementer freq: 2 kHz */
 104
 105                                                 /* valid baudrates */
 106 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 107
 108 /*-----------------------------------------------------------------------
 109  * Stack sizes
 110  *
 111  * The stack sizes are set up in start.S using the settings below
 112  */
 113 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 114 #ifdef CONFIG_USE_IRQ
 115 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 116 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 117 #endif
 118
 119 /*-----------------------------------------------------------------------
 120  * Physical Memory Map
 121  */
 122 #define CONFIG_NR_DRAM_BANKS    1          /* we have 2 banks of DRAM */
 123 #define PHYS_SDRAM_1            0xc0000000 /* SDRAM Bank #1 */
 124 #define PHYS_SDRAM_1_SIZE       0x01000000 /* 16 MB */
 125
 126 #define PHYS_FLASH_1            0x00000000 /* Flash Bank #1 */
 127 #define PHYS_FLASH_SIZE         0x01000000 /* 16 MB */
 128
 129 #define CFG_FLASH_BASE          PHYS_FLASH_1
 130
 131 /*-----------------------------------------------------------------------
 132  * FLASH and environment organization
 133  */
 134 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 135 #define CFG_MAX_FLASH_SECT      128     /* max number of sectors on one chip    */
 136
 137 /* timeout values are in ticks */
 138 #define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
 139 #define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
 140
 141 #define CFG_ENV_IS_IN_FLASH     1
 142 #define CFG_ENV_ADDR            (PHYS_FLASH_1 + 0x20000)        /* Addr of Environment Sector   */
 143 #define CFG_ENV_SIZE            0x20000 /* Total Size of Environment Sector     */
 144
 145 /* Flash banks JFFS2 should use */
 146 #define CFG_JFFS2_FIRST_BANK    0
 147 #define CFG_JFFS2_FIRST_SECTOR  2
 148 #define CFG_JFFS2_NUM_BANKS     1
 149
 150 #endif  /* __CONFIG_H */