include/configs/gardena-smart-gateway-at91sam.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2012 Atmel Corporation
   4  * Copyright (C) 2019 Stefan Roese <sr@denx.de>
   5  *
   6  * Configuation settings for the GARDENA smart Gateway (AT91SAM9G25)
   7  */
   8
   9 #ifndef __CONFIG_H__
  10 #define __CONFIG_H__
  11
  12 #ifndef __ASSEMBLY__
  13 #include <linux/bitops.h>
  14 #endif
  15
  16 /* ARM asynchronous clock */
  17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  19
  20 /* general purpose I/O */
  21 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  22
  23 /* SDRAM */
  24 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  25 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
  26
  27 #define CONFIG_SYS_INIT_SP_ADDR \
  28         (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  31
  32 /* NAND flash */
  33 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  34 #define CONFIG_SYS_NAND_BASE            0x40000000
  35 #define CONFIG_SYS_NAND_DBW_8           1
  36 /* our ALE is AD21 */
  37 #define CONFIG_SYS_NAND_MASK_ALE        BIT(21)
  38 /* our CLE is AD22 */
  39 #define CONFIG_SYS_NAND_MASK_CLE        BIT(22)
  40 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
  41 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
  42
  43 /* SPL */
  44 #define CONFIG_SPL_MAX_SIZE             0x7000
  45 #define CONFIG_SPL_STACK                0x308000
  46
  47 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
  48 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  49 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
  50 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
  51
  52 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
  53
  54 #define CONFIG_SYS_MASTER_CLOCK         132096000
  55 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
  56 #define CONFIG_SYS_MCKR                 0x1301
  57 #define CONFIG_SYS_MCKR_CSS             0x1302
  58
  59 #define CONFIG_SPL_NAND_RAW_ONLY
  60 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
  61 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0xa0000
  62 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  63 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  64
  65 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  66 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
  67 #define CONFIG_SYS_NAND_PAGE_COUNT      64
  68 #define CONFIG_SYS_NAND_OOBSIZE         64
  69 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
  70 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
  71
  72 #define CONFIG_SPL_PAD_TO               CONFIG_SYS_NAND_U_BOOT_OFFS
  73 #define CONFIG_SYS_SPL_LEN              CONFIG_SPL_PAD_TO
  74
  75 #endif