include/configs/gcplus.h

   1 /*
   2  * (C) Copyright 2002
   3  * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
   4  * Marius Groeger <mgroeger@sysgo.de>
   5  *
   6  * 2003-2004 (c) MontaVista Software, Inc.
   7  *
   8  * Configuation settings for the ADS GraphicsClient+ board.
   9  *
  10  * See file CREDITS for list of people who contributed to this
  11  * project.
  12  *
  13  * This program is free software; you can redistribute it and/or
  14  * modify it under the terms of the GNU General Public License as
  15  * published by the Free Software Foundation; either version 2 of
  16  * the License, or (at your option) any later version.
  17  *
  18  * This program is distributed in the hope that it will be useful,
  19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21  * GNU General Public License for more details.
  22  *
  23  * You should have received a copy of the GNU General Public License
  24  * along with this program; if not, write to the Free Software
  25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  26  * MA 02111-1307 USA
  27  */
  28
  29 #ifndef __CONFIG_H
  30 #define __CONFIG_H
  31
  32 #undef   DEBUG
  33
  34 /*
  35  * The ADS GCPlus Linux boot ROM loads U-Boot into RAM at 0xc0200000.
  36  * We don't actually init RAM in this case since we're using U-Boot as
  37  * an secondary boot loader during Linux kernel development and testing,
  38  * e.g. bootp/tftp download of the kernel is a far more convenient
  39  * when testing new kernels on this target. However the ADS GCPlus Linux
  40  * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
  41  * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem.
  42  */
  43 #undef  CONFIG_SKIP_LOWLEVEL_INIT
  44 #define CONFIG_SKIP_RELOCATE_UBOOT      1
  45
  46 /*
  47  * High Level Configuration Options
  48  * (easy to change)
  49  */
  50 #define CONFIG_SA1110           1       /* This is an SA1100 CPU        */
  51 #define CONFIG_GCPLUS           1       /* on an ADS GCPlus Board      */
  52
  53 #undef CONFIG_USE_IRQ                   /* we don't need IRQ/FIQ stuff */
  54
  55 #define CONFIG_CMDLINE_TAG       1      /* enable passing of ATAGs      */
  56 #define CONFIG_SETUP_MEMORY_TAGS 1
  57 #define CONFIG_INITRD_TAG        1
  58
  59 /*
  60  * Size of malloc() pool
  61  */
  62 #define CFG_MALLOC_LEN          (CFG_ENV_SIZE + 128*1024)
  63 #define CFG_GBL_DATA_SIZE       128     /* size rsrvd for initial data */
  64
  65
  66 /*
  67  * Hardware drivers
  68  */
  69 #define CONFIG_DRIVER_LAN91C96  /* we have an SMC9194 on-board */
  70 #define CONFIG_LAN91C96_BASE    0x100e0000
  71
  72 /*
  73  * select serial console configuration
  74  */
  75 #define CONFIG_SERIAL3          1       /* we use SERIAL 3 on ADS GCPlus */
  76
  77 /* allow to overwrite serial and ethaddr */
  78 #define CONFIG_ENV_OVERWRITE
  79
  80 #define CONFIG_BAUDRATE         38400
  81
  82
  83 /*
  84  * Command line configuration.
  85  */
  86 #include <config_cmd_default.h>
  87
  88 #define CONFIG_CMD_DHCP
  89
  90
  91 /*
  92  * BOOTP options
  93  */
  94 #define CONFIG_BOOTP_SUBNETMASK
  95 #define CONFIG_BOOTP_GATEWAY
  96 #define CONFIG_BOOTP_HOSTNAME
  97 #define CONFIG_BOOTP_BOOTPATH
  98
  99
 100 #define CONFIG_BOOTDELAY        3
 101 #define CONFIG_BOOTARGS         "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp"
 102 #define CONFIG_BOOTCOMMAND      "bootp;tftp;bootm"
 103 #define CFG_AUTOLOAD            "n"             /* No autoload */
 104
 105 #if defined(CONFIG_CMD_KGDB)
 106 #define CONFIG_KGDB_BAUDRATE    38400           /* speed to run kgdb serial port */
 107 #define CONFIG_KGDB_SER_INDEX   2               /* which serial port to use */
 108 #endif
 109
 110 /*
 111  * Miscellaneous configurable options
 112  */
 113 #define CFG_LONGHELP                            /* undef to save memory         */
 114 #define CFG_PROMPT              "ADS GCPlus # " /* Monitor Command Prompt       */
 115 #define CFG_CBSIZE              256             /* Console I/O Buffer Size      */
 116 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 117 #define CFG_MAXARGS             16              /* max number of command args   */
 118 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 119
 120 #define CFG_MEMTEST_START       0xc0400000      /* memtest works on     */
 121 #define CFG_MEMTEST_END         0xc0800000      /* 4 ... 8 MB in DRAM   */
 122
 123 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 124
 125 #define CFG_LOAD_ADDR           0xc0000000      /* default load address */
 126
 127 #define CFG_HZ                  3686400         /* incrementer freq: 3.6864 MHz */
 128 #define CFG_CPUSPEED            0x0a            /* set core clock to 206MHz */
 129
 130                                                 /* valid baudrates */
 131 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 132
 133 /*-----------------------------------------------------------------------
 134  * Stack sizes
 135  *
 136  * The stack sizes are set up in start.S using the settings below
 137  */
 138 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 139 #ifdef CONFIG_USE_IRQ
 140 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 141 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 142 #endif
 143
 144 /*-----------------------------------------------------------------------
 145  * Physical Memory Map
 146  */
 147 #define CONFIG_NR_DRAM_BANKS    2          /* we have 2 banks of DRAM */
 148 #define PHYS_SDRAM_1            0xc0000000 /* SDRAM Bank #1 */
 149 #define PHYS_SDRAM_1_SIZE       0x01000000 /* 16 MB */
 150 #define PHYS_SDRAM_2            0xc8000000 /* SDRAM Bank #2 */
 151 #define PHYS_SDRAM_2_SIZE       0x01000000 /* 16 MB */
 152
 153
 154 #define PHYS_FLASH_1            0x08000000 /* Flash Bank #1 */
 155 #define PHYS_FLASH_SIZE         0x00800000 /* 8 MB */
 156 #define PHYS_FLASH_BANK_SIZE    0x01000000 /* 16 MB Banks */
 157 #define PHYS_FLASH_SECT_SIZE    0x00040000 /* 256 KB sectors (x2) */
 158
 159 #define CFG_FLASH_BASE          PHYS_FLASH_1
 160
 161 /*-----------------------------------------------------------------------
 162  * FLASH and environment organization
 163  */
 164 #if     1
 165 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks */
 166 #define CFG_MAX_FLASH_SECT      128     /* max number of sectors on one chip */
 167
 168 /* timeout values are in ticks */
 169 #define CFG_FLASH_ERASE_TOUT    (2*CFG_HZ) /* Timeout for Flash Erase */
 170 #define CFG_FLASH_WRITE_TOUT    (2*CFG_HZ) /* Timeout for Flash Write */
 171 #else
 172 /* REVISIT: This doesn't work on ADS GCPlus just yet: */
 173 #define CFG_FLASH_CFI           1       /* flash is CFI conformant      */
 174 #define CFG_FLASH_CFI_DRIVER    1       /* use common cfi driver        */
 175 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster) */
 176 #define CFG_MAX_FLASH_BANKS     1       /* max # of memory banks        */
 177 #define CFG_FLASH_INCREMENT     0       /* there is only one bank       */
 178 #define CFG_MAX_FLASH_SECT      128     /* max # of sectors on one chip */
 179 /*#define CFG_FLASH_PROTECTION    1       /--* hardware flash protection    */
 180 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 181 #endif
 182
 183 #define CFG_ENV_IS_IN_FLASH     1
 184 #define CFG_ENV_ADDR            (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)   /* Addr of Environment Sector   */
 185 #define CFG_ENV_SIZE            PHYS_FLASH_SECT_SIZE
 186
 187 #endif  /* __CONFIG_H */