include/configs/goflexhome.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
   4  *
   5  * Based on dockstar.h originally written by
   6  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   7  *
   8  * Based on sheevaplug.h originally written by
   9  * Prafulla Wadaskar <prafulla@marvell.com>
  10  * (C) Copyright 2009
  11  * Marvell Semiconductor <www.marvell.com>
  12  */
  13
  14 #ifndef _CONFIG_GOFLEXHOME_H
  15 #define _CONFIG_GOFLEXHOME_H
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  21 #define CONFIG_KW88F6281        1       /* SOC Name */
  22 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  23
  24 /*
  25  * Default GPIO configuration and LED status
  26  */
  27 #define GOFLEXHOME_OE_LOW               (~(0))
  28 #define GOFLEXHOME_OE_HIGH              (~(0))
  29 #define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
  30 #define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
  31
  32 /* PHY related */
  33 #define MV88E1116_LED_FCTRL_REG         10
  34 #define MV88E1116_CPRSP_CR3_REG         21
  35 #define MV88E1116_MAC_CTRL_REG          21
  36 #define MV88E1116_PGADR_REG             22
  37 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  38 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  39
  40 /*
  41  * Commands configuration
  42  */
  43
  44 /*
  45  * mv-common.h should be defined after CMD configs since it used them
  46  * to enable certain macros
  47  */
  48 #include "mv-common.h"
  49
  50 /*
  51  *  Environment variables configurations
  52  */
  53 #ifdef CONFIG_CMD_NAND
  54 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  55 #endif
  56 /*
  57  * max 4k env size is enough, but in case of nand
  58  * it has to be rounded to sector size
  59  */
  60 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  61 #define CONFIG_ENV_ADDR                 0xC0000
  62 #define CONFIG_ENV_OFFSET               0xC0000 /* env starts here */
  63
  64 /*
  65  * Default environment variables
  66  */
  67 #define CONFIG_BOOTCOMMAND \
  68         "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
  69         "ubi part root; " \
  70         "ubifsmount ubi:root; " \
  71         "ubifsload 0x800000 ${kernel}; " \
  72         "bootm 0x800000"
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS \
  75         "console=console=ttyS0,115200\0" \
  76         "mtdids=nand0=orion_nand\0" \
  77         "mtdparts="CONFIG_MTDPARTS_DEFAULT \
  78         "kernel=/boot/uImage\0" \
  79         "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
  80
  81 /*
  82  * Ethernet Driver configuration
  83  */
  84 #ifdef CONFIG_CMD_NET
  85 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  86 #define CONFIG_PHY_BASE_ADR     0
  87 #endif /* CONFIG_CMD_NET */
  88
  89 /*
  90  *  * SATA Driver configuration
  91  *   */
  92 #ifdef CONFIG_MVSATA_IDE
  93 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  94 #endif /*CONFIG_MVSATA_IDE*/
  95
  96 #endif /* _CONFIG_GOFLEXHOME_H */