include/configs/goflexhome.h

   1 /*
   2  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
   3  *
   4  * Based on dockstar.h originally written by
   5  * Copyright (C) 2010  Eric C. Cooper <ecc@cmu.edu>
   6  *
   7  * Based on sheevaplug.h originally written by
   8  * Prafulla Wadaskar <prafulla@marvell.com>
   9  * (C) Copyright 2009
  10  * Marvell Semiconductor <www.marvell.com>
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 #ifndef _CONFIG_GOFLEXHOME_H
  16 #define _CONFIG_GOFLEXHOME_H
  17
  18 /*
  19  * High Level Configuration Options (easy to change)
  20  */
  21 #define CONFIG_FEROCEON_88FR131 1       /* CPU Core subversion */
  22 #define CONFIG_KW88F6281        1       /* SOC Name */
  23 #define CONFIG_MACH_GOFLEXHOME          /* Machine type */
  24 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  25
  26 /*
  27  * Default GPIO configuration and LED status
  28  */
  29 #define GOFLEXHOME_OE_LOW               (~(0))
  30 #define GOFLEXHOME_OE_HIGH              (~(0))
  31 #define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
  32 #define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
  33
  34 /* PHY related */
  35 #define MV88E1116_LED_FCTRL_REG         10
  36 #define MV88E1116_CPRSP_CR3_REG         21
  37 #define MV88E1116_MAC_CTRL_REG          21
  38 #define MV88E1116_PGADR_REG             22
  39 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  40 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  41
  42 /*
  43  * Commands configuration
  44  */
  45
  46 #define CONFIG_CMD_NAND
  47 #define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */
  48
  49 /*
  50  * mv-common.h should be defined after CMD configs since it used them
  51  * to enable certain macros
  52  */
  53 #include "mv-common.h"
  54
  55 /*
  56  *  Environment variables configurations
  57  */
  58 #ifdef CONFIG_CMD_NAND
  59 #define CONFIG_ENV_IS_IN_NAND           1
  60 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  61 #else
  62 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  63 #endif
  64 /*
  65  * max 4k env size is enough, but in case of nand
  66  * it has to be rounded to sector size
  67  */
  68 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  69 #define CONFIG_ENV_ADDR                 0xC0000
  70 #define CONFIG_ENV_OFFSET               0xC0000 /* env starts here */
  71
  72 /*
  73  * Default environment variables
  74  */
  75 #define CONFIG_BOOTCOMMAND \
  76         "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
  77         "ubi part root; " \
  78         "ubifsmount ubi:root; " \
  79         "ubifsload 0x800000 ${kernel}; " \
  80         "bootm 0x800000"
  81
  82 #define CONFIG_MTDPARTS \
  83         "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
  84
  85 #define CONFIG_EXTRA_ENV_SETTINGS \
  86         "console=console=ttyS0,115200\0" \
  87         "mtdids=nand0=orion_nand\0" \
  88         "mtdparts="CONFIG_MTDPARTS \
  89         "kernel=/boot/uImage\0" \
  90         "bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
  91
  92 /*
  93  * Ethernet Driver configuration
  94  */
  95 #ifdef CONFIG_CMD_NET
  96 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
  97 #define CONFIG_PHY_BASE_ADR     0
  98 #endif /* CONFIG_CMD_NET */
  99
 100 /*
 101  *  * SATA Driver configuration
 102  *   */
 103 #ifdef CONFIG_MVSATA_IDE
 104 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 105 #endif /*CONFIG_MVSATA_IDE*/
 106
 107 /*
 108  *  * RTC driver configuration
 109  *   */
 110 #ifdef CONFIG_CMD_DATE
 111 #define CONFIG_RTC_MV
 112 #endif /* CONFIG_CMD_DATE */
 113
 114 #endif /* _CONFIG_GOFLEXHOME_H */