]>
git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/hikey.h
2 * (C) Copyright 2015 Linaro
4 * Peter Griffin <peter.griffin@linaro.org>
6 * Configuration for HiKey 96boards CE. Parts were derived from other ARM
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <linux/sizes.h>
18 #define CONFIG_POWER_HI6553
20 #define CONFIG_REMAKE_ELF
22 #define CONFIG_SUPPORT_RAW_INITRD
25 #define CONFIG_SYS_CACHELINE_SIZE 64
27 #define CONFIG_IDENT_STRING "hikey"
29 #define CONFIG_BOARD_EARLY_INIT_F
31 /* Physical Memory Map */
33 /* CONFIG_SYS_TEXT_BASE needs to align with where ATF loads bl33.bin */
34 #define CONFIG_SYS_TEXT_BASE 0x35000000
36 #define CONFIG_NR_DRAM_BANKS 1
37 #define PHYS_SDRAM_1 0x00000000
39 /* 1008 MB (the last 16Mb are secured for TrustZone by ATF*/
40 #define PHYS_SDRAM_1_SIZE 0x3EFFFFFF
42 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
44 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
46 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
48 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
50 /* Generic Timer Definitions */
51 #define COUNTER_FREQUENCY 19000000
53 /* Generic Interrupt Controller Definitions */
54 #define GICD_BASE 0xf6801000
55 #define GICC_BASE 0xf6802000
57 /* Size of malloc() pool */
58 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
60 /* Serial port PL010/PL011 through the device model */
61 #define CONFIG_PL01X_SERIAL
62 #define CONFIG_BAUDRATE 115200
65 #define CONFIG_USB_DWC2
66 #define CONFIG_USB_DWC2_REG_ADDR 0xF72C0000
67 /*#define CONFIG_DWC2_DFLT_SPEED_FULL*/
68 #define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
70 #define CONFIG_USB_STORAGE
71 #define CONFIG_USB_HOST_ETHER
72 #define CONFIG_USB_ETHER_SMSC95XX
73 #define CONFIG_USB_ETHER_ASIX
74 #define CONFIG_MISC_INIT_R
77 #define CONFIG_HIKEY_GPIO
79 /* SD/MMC configuration */
80 #define CONFIG_GENERIC_MMC
83 #define CONFIG_HIKEY_DWMMC
84 #define CONFIG_BOUNCE_BUFFER
85 #define CONFIG_CMD_MMC
87 #define CONFIG_FS_EXT4
89 /* Command line configuration */
91 #define CONFIG_CMD_CACHE
92 #define CONFIG_CMD_UNZIP
93 #define CONFIG_CMD_ENV
95 #define CONFIG_MTD_PARTITIONS
98 #define CONFIG_BOOTP_BOOTFILESIZE
100 #include <config_distro_defaults.h>
102 /* Initial environment variables */
105 * Defines where the kernel and FDT will be put in RAM
108 /* Assume we boot with root on the seventh partition of eMMC */
109 #define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
111 #define BOOT_TARGET_DEVICES(func) \
115 #include <config_distro_bootcmd.h>
117 #define CONFIG_EXTRA_ENV_SETTINGS \
118 "kernel_name=Image\0" \
119 "kernel_addr_r=0x00080000\0" \
120 "fdtfile=hi6220-hikey.dtb\0" \
121 "fdt_addr_r=0x02000000\0" \
122 "fdt_high=0xffffffffffffffff\0" \
123 "initrd_high=0xffffffffffffffff\0" \
127 /* Preserve enviroment on sd card */
128 #define CONFIG_COMMAND_HISTORY
130 #define CONFIG_ENV_SIZE 0x1000
131 #define CONFIG_ENV_IS_IN_FAT
132 #define FAT_ENV_INTERFACE "mmc"
133 #define FAT_ENV_DEVICE_AND_PART "1:1"
134 #define FAT_ENV_FILE "uboot.env"
135 #define CONFIG_FAT_WRITE
136 #define CONFIG_ENV_VARS_UBOOT_CONFIG
138 /* Monitor Command Prompt */
139 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
140 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
141 sizeof(CONFIG_SYS_PROMPT) + 16)
142 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
143 #define CONFIG_SYS_LONGHELP
144 #define CONFIG_CMDLINE_EDITING
145 #define CONFIG_SYS_MAXARGS 64 /* max command args */
147 #define CONFIG_SYS_NO_FLASH
149 #endif /* __HIKEY_H */