include/configs/ibf-dsp561.h

   1 /*
   2  * U-boot - Configuration file for IBF-DSP561 board
   3  */
   4
   5 #ifndef __CONFIG_IBF_DSP561__H__
   6 #define __CONFIG_IBF_DSP561__H__
   7
   8 #include <asm/config-pre.h>
   9
  10
  11 /*
  12  * Processor Settings
  13  */
  14 #define CONFIG_BFIN_CPU             bf561-0.5
  15 #define CONFIG_BFIN_BOOT_MODE       BFIN_BOOT_BYPASS
  16
  17
  18 /*
  19  * Clock Settings
  20  *      CCLK = (CLKIN * VCO_MULT) / CCLK_DIV
  21  *      SCLK = (CLKIN * VCO_MULT) / SCLK_DIV
  22  */
  23 /* CONFIG_CLKIN_HZ is any value in Hz                                   */
  24 #define CONFIG_CLKIN_HZ                 25000000
  25 /* CLKIN_HALF controls the DF bit in PLL_CTL      0 = CLKIN             */
  26 /*                                                1 = CLKIN / 2         */
  27 #define CONFIG_CLKIN_HALF               0
  28 /* PLL_BYPASS controls the BYPASS bit in PLL_CTL  0 = do not bypass     */
  29 /*                                                1 = bypass PLL        */
  30 #define CONFIG_PLL_BYPASS               0
  31 /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL              */
  32 /* Values can range from 0-63 (where 0 means 64)                        */
  33 #define CONFIG_VCO_MULT                 24
  34 /* CCLK_DIV controls the core clock divider                             */
  35 /* Values can be 1, 2, 4, or 8 ONLY                                     */
  36 #define CONFIG_CCLK_DIV                 1
  37 /* SCLK_DIV controls the system clock divider                           */
  38 /* Values can range from 1-15                                           */
  39 #define CONFIG_SCLK_DIV                 5
  40
  41
  42 /*
  43  * Memory Settings
  44  */
  45 #define CONFIG_MEM_ADD_WDTH     9
  46 #define CONFIG_MEM_SIZE         64
  47
  48 #define CONFIG_EBIU_SDRRC_VAL   0x377
  49 #define CONFIG_EBIU_SDGCTL_VAL  0x91998d
  50 #define CONFIG_EBIU_SDBCTL_VAL  0x15
  51
  52 #define CONFIG_EBIU_AMGCTL_VAL  0x3F
  53 #define CONFIG_EBIU_AMBCTL0_VAL 0x7BB07BB0
  54 #define CONFIG_EBIU_AMBCTL1_VAL 0xFFC27BB0
  55
  56 #define CONFIG_SYS_MONITOR_LEN  (256 * 1024)
  57 #define CONFIG_SYS_MALLOC_LEN   (128 * 1024)
  58
  59
  60 /*
  61  * Network Settings
  62  */
  63 #define ADI_CMDS_NETWORK        1
  64 #define CONFIG_DRIVER_AX88180   1
  65 #define AX88180_BASE            0x2c000000
  66 #define CONFIG_HOSTNAME         ibf-dsp561
  67
  68
  69 /*
  70  * Flash Settings
  71  */
  72 #define CONFIG_SYS_FLASH_CFI            /* The flash is CFI compatible */
  73 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
  74 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
  75 #define CONFIG_SYS_FLASH_BASE           0x20000000
  76 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
  77 #define CONFIG_SYS_MAX_FLASH_SECT       135     /* max number of sectors on one chip */
  78 /* The BF561-EZKIT uses a top boot flash */
  79 #define CONFIG_ENV_IS_IN_FLASH  1
  80 #define CONFIG_ENV_OFFSET               0x4000
  81 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
  82 #define CONFIG_ENV_SIZE         0x2000
  83 #define CONFIG_ENV_SECT_SIZE    0x12000 /* Total Size of Environment Sector */
  84 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS)
  85 #define ENV_IS_EMBEDDED
  86 #else
  87 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
  88 #endif
  89 #ifdef ENV_IS_EMBEDDED
  90 /* WARNING - the following is hand-optimized to fit within
  91  * the sector before the environment sector. If it throws
  92  * an error during compilation remove an object here to get
  93  * it linked after the configuration sector.
  94  */
  95 # define LDS_BOARD_TEXT \
  96         arch/blackfin/lib/built-in.o (.text*); \
  97         arch/blackfin/cpu/built-in.o (.text*); \
  98         . = DEFINED(env_offset) ? env_offset : .; \
  99         common/env_embedded.o (.text*);
 100 #endif
 101
 102
 103 /*
 104  * I2C Settings
 105  */
 106 #define CONFIG_SYS_I2C
 107 #define CONFIG_SYS_I2C_SOFT             /* I2C bit-banged */
 108 #define CONFIG_SOFT_I2C_GPIO_SCL GPIO_PF0
 109 #define CONFIG_SOFT_I2C_GPIO_SDA GPIO_PF1
 110
 111 /*
 112  * Misc Settings
 113  */
 114 #define CONFIG_UART_CONSOLE     0
 115
 116
 117 /*
 118  * Pull in common ADI header for remaining command/environment setup
 119  */
 120 #include <configs/bfin_adi_common.h>
 121
 122 #endif