include/configs/j721e_evm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuration header file for K3 J721E EVM
   4  *
   5  * Copyright (C) 2018-2020 Texas Instruments Incorporated - https://www.ti.com/
   6  *      Lokesh Vutla <lokeshvutla@ti.com>
   7  */
   8
   9 #ifndef __CONFIG_J721E_EVM_H
  10 #define __CONFIG_J721E_EVM_H
  11
  12 #include <linux/sizes.h>
  13 #include <environment/ti/mmc.h>
  14 #include <environment/ti/k3_rproc.h>
  15 #include <environment/ti/ufs.h>
  16 #include <environment/ti/k3_dfu.h>
  17
  18 /* DDR Configuration */
  19 #define CFG_SYS_SDRAM_BASE1             0x880000000
  20 /* FLASH Configuration */
  21 #define CFG_SYS_FLASH_BASE              0x000000000
  22
  23 /* SPL Loader Configuration */
  24 #if defined(CONFIG_TARGET_J721E_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
  25 #define CFG_SYS_UBOOT_BASE              0x50280000
  26 /* Image load address in RAM for DFU boot*/
  27 #else
  28 #define CFG_SYS_UBOOT_BASE              0x50080000
  29 #endif
  30
  31 /* HyperFlash related configuration */
  32
  33 /* U-Boot general configuration */
  34 #define EXTRA_ENV_J721E_BOARD_SETTINGS                                  \
  35         "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"      \
  36         "findfdt="                                                      \
  37                 "setenv name_fdt ${default_device_tree};"               \
  38                 "if test $board_name = j721e; then "                    \
  39                         "setenv name_fdt k3-j721e-common-proc-board.dtb; fi;" \
  40                 "if test $board_name = j721e-eaik || test $board_name = j721e-sk; then "                \
  41                         "setenv name_fdt k3-j721e-sk.dtb; fi;"  \
  42                 "setenv fdtfile ${name_fdt}\0"                          \
  43         "name_kern=Image\0"                                             \
  44         "console=ttyS2,115200n8\0"                                      \
  45         "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 "  \
  46                 "${mtdparts}\0"                                         \
  47         "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
  48
  49 #define PARTS_DEFAULT \
  50         /* Linux partitions */ \
  51         "uuid_disk=${uuid_gpt_disk};" \
  52         "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
  53
  54 #ifdef CONFIG_SYS_K3_SPL_ATF
  55 #if defined(CONFIG_TARGET_J721E_R5_EVM)
  56 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                              \
  57         "addr_mcur5f0_0load=0x89000000\0"                               \
  58         "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
  59 #elif defined(CONFIG_TARGET_J7200_R5_EVM)
  60 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                              \
  61         "addr_mcur5f0_0load=0x89000000\0"                               \
  62         "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
  63 #endif /* CONFIG_TARGET_J721E_R5_EVM */
  64 #else
  65 #define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
  66 #endif /* CONFIG_SYS_K3_SPL_ATF */
  67
  68 /* U-Boot MMC-specific configuration */
  69 #define EXTRA_ENV_J721E_BOARD_SETTINGS_MMC                              \
  70         "boot=mmc\0"                                                    \
  71         "mmcdev=1\0"                                                    \
  72         "bootpart=1:2\0"                                                \
  73         "bootdir=/boot\0"                                               \
  74         EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                              \
  75         "rd_spec=-\0"                                                   \
  76         "init_mmc=run args_all args_mmc\0"                              \
  77         "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
  78         "get_overlay_mmc="                                              \
  79                 "fdt address ${fdtaddr};"                               \
  80                 "fdt resize 0x100000;"                                  \
  81                 "for overlay in $name_overlays;"                        \
  82                 "do;"                                                   \
  83                 "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "    \
  84                 "fdt apply ${dtboaddr};"                                \
  85                 "done;\0"                                               \
  86         "partitions=" PARTS_DEFAULT                                     \
  87         "get_kern_mmc=load mmc ${bootpart} ${loadaddr} "                \
  88                 "${bootdir}/${name_kern}\0"                             \
  89         "get_fit_mmc=load mmc ${bootpart} ${addr_fit} "                 \
  90                 "${bootdir}/${name_fit}\0"                              \
  91         "partitions=" PARTS_DEFAULT
  92
  93 /* Set the default list of remote processors to boot */
  94 #if defined(CONFIG_TARGET_J7200_A72_EVM)
  95 #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY                          \
  96         "do_main_cpsw0_qsgmii_phyinit=1\0"                              \
  97         "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"               \
  98                  "gpio clear gpio@22_16\0"                              \
  99         "main_cpsw0_qsgmii_phyinit="                                    \
 100         "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
 101                         "test ${boot} = mmc; then "                     \
 102                 "run init_main_cpsw0_qsgmii_phy;"                       \
 103         "fi;\0"
 104 #ifdef DEFAULT_RPROCS
 105 #undef DEFAULT_RPROCS
 106 #endif
 107 #elif defined(CONFIG_TARGET_J721E_A72_EVM)
 108 #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY                          \
 109         "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"               \
 110                  "gpio clear gpio@22_16\0"                              \
 111         "main_cpsw0_qsgmii_phyinit="                                    \
 112         "if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM " \
 113         "|| test $board_name = j721e; then " \
 114         "do_main_cpsw0_qsgmii_phyinit=1; else "                 \
 115         "do_main_cpsw0_qsgmii_phyinit=0; fi;"                   \
 116         "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
 117                         "test ${boot} = mmc; then "                     \
 118                 "run init_main_cpsw0_qsgmii_phy;"                       \
 119         "fi;\0"
 120 #ifdef DEFAULT_RPROCS
 121 #undef DEFAULT_RPROCS
 122 #endif
 123 #endif
 124
 125 #ifdef CONFIG_TARGET_J721E_A72_EVM
 126 #define DEFAULT_RPROCS  ""                                              \
 127                 "2 /lib/firmware/j7-main-r5f0_0-fw "                    \
 128                 "3 /lib/firmware/j7-main-r5f0_1-fw "                    \
 129                 "4 /lib/firmware/j7-main-r5f1_0-fw "                    \
 130                 "5 /lib/firmware/j7-main-r5f1_1-fw "                    \
 131                 "6 /lib/firmware/j7-c66_0-fw "                          \
 132                 "7 /lib/firmware/j7-c66_1-fw "                          \
 133                 "8 /lib/firmware/j7-c71_0-fw "
 134 #endif /* CONFIG_TARGET_J721E_A72_EVM */
 135
 136 #ifdef CONFIG_TARGET_J7200_A72_EVM
 137 #define DEFAULT_RPROCS ""                                               \
 138                 "2 /lib/firmware/j7200-main-r5f0_0-fw "                 \
 139                 "3 /lib/firmware/j7200-main-r5f0_1-fw "
 140 #endif /* CONFIG_TARGET_J7200_A72_EVM */
 141
 142 #ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
 143 #define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
 144 #endif
 145
 146 #define EXTRA_ENV_DFUARGS \
 147         DFU_ALT_INFO_MMC \
 148         DFU_ALT_INFO_EMMC \
 149         DFU_ALT_INFO_RAM \
 150         DFU_ALT_INFO_OSPI
 151
 152 #if CONFIG_IS_ENABLED(CMD_PXE)
 153 # define BOOT_TARGET_PXE(func) func(PXE, pxe, na)
 154 #else
 155 # define BOOT_TARGET_PXE(func)
 156 #endif
 157
 158 #if CONFIG_IS_ENABLED(CMD_DHCP)
 159 # define BOOT_TARGET_DHCP(func) func(DHCP, dhcp, na)
 160 #else
 161 # define BOOT_TARGET_DHCP(func)
 162 #endif
 163
 164 #ifdef CONFIG_CMD_USB
 165 # define BOOT_TARGET_USB(func)  func(USB, usb, 0)
 166 #else
 167 # define BOOT_TARGET_USB(func)
 168 #endif
 169
 170 #define BOOT_TARGET_DEVICES(func) \
 171         BOOT_TARGET_USB(func) \
 172         func(MMC, mmc, 1) \
 173         func(MMC, mmc, 0) \
 174         BOOT_TARGET_PXE(func) \
 175         BOOT_TARGET_DHCP(func)
 176
 177 #include <config_distro_bootcmd.h>
 178
 179 /* Incorporate settings into the U-Boot environment */
 180 #define CFG_EXTRA_ENV_SETTINGS                                  \
 181         DEFAULT_LINUX_BOOT_ENV                                          \
 182         DEFAULT_MMC_TI_ARGS                                             \
 183         DEFAULT_FIT_TI_ARGS                                             \
 184         EXTRA_ENV_J721E_BOARD_SETTINGS                                  \
 185         EXTRA_ENV_J721E_BOARD_SETTINGS_MMC                              \
 186         EXTRA_ENV_RPROC_SETTINGS                                        \
 187         EXTRA_ENV_DFUARGS                                               \
 188         DEFAULT_UFS_TI_ARGS                                             \
 189         EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY                          \
 190         BOOTENV
 191
 192 /* Now for the remaining common defines */
 193 #include <configs/ti_armv7_common.h>
 194
 195 /* MMC ENV related defines */
 196
 197 #endif /* __CONFIG_J721E_EVM_H */