include/configs/km8360.h

   1 /*
   2  * (C) Copyright 2012
   3  * Holger Brunck, Keymile GmbH Hannover, <holger.brunck@keymile.com>
   4  * Christian Herzig, Keymile AG Switzerland, <christian.herzig@keymile.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #define CONFIG_DISPLAY_BOARDINFO
  13
  14 /* KMBEC FPGA (PRIO) */
  15 #define CONFIG_SYS_KMBEC_FPGA_BASE      0xE8000000
  16 #define CONFIG_SYS_KMBEC_FPGA_SIZE      64
  17
  18 #if defined CONFIG_KMETER1
  19 #define CONFIG_HOSTNAME         kmeter1
  20 #define CONFIG_KM_BOARD_NAME   "kmeter1"
  21 #define CONFIG_KM_DEF_NETDEV    "netdev=eth2\0"
  22 #elif defined CONFIG_KMCOGE5NE
  23 #define CONFIG_HOSTNAME         kmcoge5ne
  24 #define CONFIG_KM_BOARD_NAME    "kmcoge5ne"
  25 #define CONFIG_KM_DEF_NETDEV    "netdev=eth1\0"
  26 #define CONFIG_CMD_NAND
  27 #define CONFIG_NAND_ECC_BCH
  28 #define CONFIG_BCH
  29 #define CONFIG_NAND_KMETER1
  30 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  31 #define NAND_MAX_CHIPS                          1
  32 #define CONFIG_SYS_NAND_BASE CONFIG_SYS_KMBEC_FPGA_BASE /* PRIO_BASE_ADDRESS */
  33
  34 #define CONFIG_KM_UBI_PARTITION_NAME_BOOT       "ubi0"
  35 #define CONFIG_KM_UBI_PARTITION_NAME_APP        "ubi1"
  36 #define MTDIDS_DEFAULT                  "nor0=boot,nand0=app"
  37
  38 #define MTDPARTS_DEFAULT                "mtdparts="                     \
  39         "boot:"                                                         \
  40                 "768k(u-boot),"                                         \
  41                 "128k(env),"                                            \
  42                 "128k(envred),"                                         \
  43                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"             \
  44         "app:"                                                          \
  45                 "-(" CONFIG_KM_UBI_PARTITION_NAME_APP ");"
  46 #else
  47 #error ("Board not supported")
  48 #endif
  49
  50 /*
  51  * High Level Configuration Options
  52  */
  53 #define CONFIG_QE                       /* Has QE */
  54 #define CONFIG_MPC8360                  /* MPC8360 CPU specific */
  55
  56 #define CONFIG_SYS_TEXT_BASE    0xF0000000
  57
  58 /* include common defines/options for all 83xx Keymile boards */
  59 #include "km/km83xx-common.h"
  60
  61 /*
  62  * System IO Setup
  63  */
  64 #define CONFIG_SYS_SICRH                (SICRH_UC1EOBI | SICRH_UC2E1OBI)
  65
  66 /*
  67  * Hardware Reset Configuration Word
  68  */
  69 #define CONFIG_SYS_HRCW_LOW (\
  70         HRCWL_CSB_TO_CLKIN_4X1 | \
  71         HRCWL_CORE_TO_CSB_2X1 | \
  72         HRCWL_CE_PLL_VCO_DIV_2 | \
  73         HRCWL_CE_TO_PLL_1X6)
  74
  75 #define CONFIG_SYS_HRCW_HIGH (\
  76         HRCWH_CORE_ENABLE | \
  77         HRCWH_FROM_0X00000100 | \
  78         HRCWH_BOOTSEQ_DISABLE | \
  79         HRCWH_SW_WATCHDOG_DISABLE | \
  80         HRCWH_ROM_LOC_LOCAL_16BIT | \
  81         HRCWH_BIG_ENDIAN | \
  82         HRCWH_LALE_EARLY | \
  83         HRCWH_LDP_CLEAR)
  84
  85 /**
  86  * DDR RAM settings
  87  */
  88 #define CONFIG_SYS_DDR_SDRAM_CFG (\
  89         SDRAM_CFG_SDRAM_TYPE_DDR2 | \
  90         SDRAM_CFG_SREN | \
  91         SDRAM_CFG_HSE)
  92
  93 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
  94
  95 #ifdef CONFIG_KMCOGE5NE
  96 /**
  97  * KMCOGE5NE has 512 MB RAM
  98  */
  99 #define CONFIG_SYS_DDR_CS0_CONFIG (\
 100         CSCONFIG_EN | \
 101         CSCONFIG_AP | \
 102         CSCONFIG_ODT_RD_ONLY_CURRENT | \
 103         CSCONFIG_BANK_BIT_3 | \
 104         CSCONFIG_ROW_BIT_13 | \
 105         CSCONFIG_COL_BIT_10)
 106 #else
 107 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
 108                                          CSCONFIG_ROW_BIT_13 | \
 109                                          CSCONFIG_COL_BIT_10 | \
 110                                          CSCONFIG_ODT_RD_ONLY_CURRENT)
 111 #endif
 112
 113 #define CONFIG_SYS_DDR_CLK_CNTL (\
 114         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 115
 116 #define CONFIG_SYS_DDR_INTERVAL (\
 117         (0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
 118         (0x203 << SDRAM_INTERVAL_REFINT_SHIFT))
 119
 120 #define CONFIG_SYS_DDR_CS0_BNDS                 0x0000007f
 121
 122 #define CONFIG_SYS_DDRCDR (\
 123         DDRCDR_EN | \
 124         DDRCDR_Q_DRN)
 125 #define CONFIG_SYS_DDR_MODE             0x47860452
 126 #define CONFIG_SYS_DDR_MODE2            0x8080c000
 127
 128 #define CONFIG_SYS_DDR_TIMING_0 (\
 129         (2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
 130         (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
 131         (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
 132         (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
 133         (0 << TIMING_CFG0_WWT_SHIFT) | \
 134         (0 << TIMING_CFG0_RRT_SHIFT) | \
 135         (0 << TIMING_CFG0_WRT_SHIFT) | \
 136         (0 << TIMING_CFG0_RWT_SHIFT))
 137
 138 #define CONFIG_SYS_DDR_TIMING_1 ((TIMING_CFG1_CASLAT_50) | \
 139                                  (2 << TIMING_CFG1_WRTORD_SHIFT) | \
 140                                  (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
 141                                  (3 << TIMING_CFG1_WRREC_SHIFT) | \
 142                                  (7 << TIMING_CFG1_REFREC_SHIFT) | \
 143                                  (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
 144                                  (8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
 145                                  (3 << TIMING_CFG1_PRETOACT_SHIFT))
 146
 147 #define CONFIG_SYS_DDR_TIMING_2 (\
 148         (0xa << TIMING_CFG2_FOUR_ACT_SHIFT) | \
 149         (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
 150         (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
 151         (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
 152         (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
 153         (5 << TIMING_CFG2_CPO_SHIFT) | \
 154         (0 << TIMING_CFG2_ADD_LAT_SHIFT))
 155
 156 #define CONFIG_SYS_DDR_TIMING_3                 0x00000000
 157
 158 /* EEprom support */
 159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 160
 161 /*
 162  * Local Bus Configuration & Clock Setup
 163  */
 164 #define CONFIG_SYS_LCRR_DBYP            LCRR_DBYP
 165 #define CONFIG_SYS_LCRR_EADC            LCRR_EADC_2
 166 #define CONFIG_SYS_LCRR_CLKDIV          LCRR_CLKDIV_4
 167
 168 /*
 169  * PAXE on the local bus CS3
 170  */
 171 #define CONFIG_SYS_PAXE_BASE            0xA0000000
 172 #define CONFIG_SYS_PAXE_SIZE            256
 173
 174 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE
 175
 176 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
 177
 178 #define CONFIG_SYS_BR3_PRELIM (\
 179         CONFIG_SYS_PAXE_BASE | \
 180         (1 << BR_PS_SHIFT) | \
 181         BR_V)
 182
 183 #define CONFIG_SYS_OR3_PRELIM (\
 184         MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
 185         OR_GPCM_CSNT | \
 186         OR_GPCM_ACS_DIV2 | \
 187         OR_GPCM_SCY_2 | \
 188         OR_GPCM_TRLX | \
 189         OR_GPCM_EAD)
 190
 191 #ifdef CONFIG_KMCOGE5NE
 192 /*
 193  * BFTIC3 on the local bus CS4
 194  */
 195 #define CONFIG_SYS_BFTIC3_BASE                  0xB0000000
 196 #define CONFIG_SYS_BFTIC3_SIZE                  256
 197
 198 #define CONFIG_SYS_BR4_PRELIM (\
 199         CONFIG_SYS_BFTIC3_BASE |\
 200         (1 << BR_PS_SHIFT) | \
 201         BR_V)
 202
 203 #define CONFIG_SYS_OR4_PRELIM (\
 204         MEG_TO_AM(CONFIG_SYS_BFTIC3_SIZE) |\
 205         OR_GPCM_CSNT | \
 206         OR_GPCM_ACS_DIV2 |\
 207         OR_GPCM_SCY_2 |\
 208         OR_GPCM_TRLX |\
 209         OR_GPCM_EAD)
 210 #endif
 211
 212 /*
 213  * MMU Setup
 214  */
 215
 216 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
 217 #define CONFIG_SYS_IBAT5L (\
 218         CONFIG_SYS_PAXE_BASE | \
 219         BATL_PP_10 | \
 220         BATL_MEMCOHERENCE)
 221
 222 #define CONFIG_SYS_IBAT5U (\
 223         CONFIG_SYS_PAXE_BASE | \
 224         BATU_BL_256M | \
 225         BATU_VS | \
 226         BATU_VP)
 227
 228 #define CONFIG_SYS_DBAT5L (\
 229         CONFIG_SYS_PAXE_BASE | \
 230         BATL_PP_10 | \
 231         BATL_CACHEINHIBIT | \
 232         BATL_GUARDEDSTORAGE)
 233
 234 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 235
 236
 237 #ifdef CONFIG_KMCOGE5NE
 238 /* BFTIC3:  icache cacheable, but dcache-inhibit and guarded */
 239 #define CONFIG_SYS_IBAT6L (\
 240         CONFIG_SYS_BFTIC3_BASE | \
 241         BATL_PP_10 | \
 242         BATL_MEMCOHERENCE)
 243
 244 #define CONFIG_SYS_IBAT6U (\
 245         CONFIG_SYS_BFTIC3_BASE | \
 246         BATU_BL_256M | \
 247         BATU_VS | \
 248         BATU_VP)
 249
 250 #define CONFIG_SYS_DBAT6L (\
 251         CONFIG_SYS_BFTIC3_BASE | \
 252         BATL_PP_10 | \
 253         BATL_CACHEINHIBIT | \
 254         BATL_GUARDEDSTORAGE)
 255
 256 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 257
 258 /* DDR/LBC SDRAM next 256M: cacheable */
 259 #define CONFIG_SYS_IBAT7L (\
 260         CONFIG_SYS_SDRAM_BASE2 |\
 261         BATL_PP_10 |\
 262         BATL_CACHEINHIBIT |\
 263         BATL_GUARDEDSTORAGE)
 264
 265 #define CONFIG_SYS_IBAT7U (\
 266         CONFIG_SYS_SDRAM_BASE2 |\
 267         BATU_BL_256M |\
 268         BATU_VS |\
 269         BATU_VP)
 270 /* enable POST tests */
 271 #define CONFIG_POST (CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS)
 272 #define CONFIG_POST_EXTERNAL_WORD_FUNCS /* use own functions, not generic */
 273 #define CPM_POST_WORD_ADDR  CONFIG_SYS_MEMTEST_END
 274 #define CONFIG_TESTPIN_REG  gprt3       /* for kmcoge5ne */
 275 #define CONFIG_TESTPIN_MASK 0x20        /* for kmcoge5ne */
 276 #define CONFIG_CMD_DIAG /* so that testpin is inquired for POST test */
 277
 278 #else
 279 #define CONFIG_SYS_IBAT6L       (0)
 280 #define CONFIG_SYS_IBAT6U       (0)
 281 #define CONFIG_SYS_IBAT7L       (0)
 282 #define CONFIG_SYS_IBAT7U       (0)
 283 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 284 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 285 #endif
 286
 287 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 288 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 289
 290 #endif /* CONFIG */