include/configs/kmeter1.h

   1 /*
   2  * Copyright (C) 2006 Freescale Semiconductor, Inc.
   3  *                    Dave Liu <daveliu@freescale.com>
   4  *
   5  * Copyright (C) 2007 Logic Product Development, Inc.
   6  *                    Peter Barada <peterb@logicpd.com>
   7  *
   8  * Copyright (C) 2007 MontaVista Software, Inc.
   9  *                    Anton Vorontsov <avorontsov@ru.mvista.com>
  10  *
  11  * (C) Copyright 2008
  12  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  */
  19
  20 #ifndef __CONFIG_H
  21 #define __CONFIG_H
  22
  23 /*
  24  * High Level Configuration Options
  25  */
  26 #define CONFIG_E300             1 /* E300 family */
  27 #define CONFIG_QE               1 /* Has QE */
  28 #define CONFIG_MPC83xx          1 /* MPC83xx family */
  29 #define CONFIG_MPC8360          1 /* MPC8360 CPU specific */
  30 #define CONFIG_KMETER1          1 /* KMETER1 board specific */
  31 #define CONFIG_HOSTNAME         kmeter1
  32
  33 /* include common defines/options for all Keymile boards */
  34 #include "keymile-common.h"
  35
  36 #define CONFIG_MISC_INIT_R      1
  37 /*
  38  * System Clock Setup
  39  */
  40 #define CONFIG_83XX_CLKIN               66000000
  41 #define CONFIG_SYS_CLK_FREQ             66000000
  42 #define CONFIG_83XX_PCICLK              66000000
  43
  44 /*
  45  * Hardware Reset Configuration Word
  46  */
  47 #define CONFIG_SYS_HRCW_LOW (\
  48         HRCWL_CSB_TO_CLKIN_4X1 | \
  49         HRCWL_CORE_TO_CSB_2X1 | \
  50         HRCWL_CE_PLL_VCO_DIV_2 | \
  51         HRCWL_CE_TO_PLL_1X6 )
  52
  53 #define CONFIG_SYS_HRCW_HIGH (\
  54         HRCWH_CORE_ENABLE | \
  55         HRCWH_FROM_0X00000100 | \
  56         HRCWH_BOOTSEQ_DISABLE | \
  57         HRCWH_SW_WATCHDOG_DISABLE | \
  58         HRCWH_ROM_LOC_LOCAL_16BIT | \
  59         HRCWH_BIG_ENDIAN | \
  60         HRCWH_LALE_EARLY | \
  61         HRCWH_LDP_CLEAR )
  62
  63 /*
  64  * System IO Config
  65  */
  66 #define CONFIG_SYS_SICRH                0x00000006
  67 #define CONFIG_SYS_SICRL                0x00000000
  68
  69 /*
  70  * IMMR new address
  71  */
  72 #define CONFIG_SYS_IMMR         0xE0000000
  73
  74 /*
  75  * DDR Setup
  76  */
  77 #define CONFIG_SYS_DDR_BASE             0x00000000 /* DDR is system memory */
  78 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_BASE
  79 #define CONFIG_SYS_DDR_SDRAM_BASE       CONFIG_SYS_DDR_BASE
  80 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL   (DDR_SDRAM_CLK_CNTL_SS_EN | \
  81                                         DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
  82
  83 #define CFG_83XX_DDR_USES_CS0
  84
  85 #undef CONFIG_DDR_ECC
  86
  87 /*
  88  * DDRCDR - DDR Control Driver Register
  89  */
  90
  91 #undef CONFIG_SPD_EEPROM        /* Do not use SPD EEPROM for DDR setup */
  92
  93 /*
  94  * Manually set up DDR parameters
  95  */
  96 #define CONFIG_DDR_II
  97 #define CONFIG_SYS_DDR_SIZE             2048 /* MB */
  98 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000007f
  99 #define CONFIG_SYS_DDR_CS0_CONFIG       (CSCONFIG_EN | CSCONFIG_AP | \
 100                                          CSCONFIG_ROW_BIT_13 | \
 101                                          CSCONFIG_COL_BIT_10 | CSCONFIG_ODT_WR_ACS)
 102
 103 #define CONFIG_SYS_DDR_SDRAM_CFG        (SDRAM_CFG_SDRAM_TYPE_DDR2 | \
 104                                          SDRAM_CFG_SREN)
 105 #define CONFIG_SYS_DDR_SDRAM_CFG2       0x00401000
 106 #define CONFIG_SYS_DDR_CLK_CNTL (DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
 107 #define CONFIG_SYS_DDR_INTERVAL ((0x080 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
 108                                  (0x3cf << SDRAM_INTERVAL_REFINT_SHIFT))
 109
 110 #define CONFIG_SYS_DDRCDR               0x40000001
 111 #define CONFIG_SYS_DDR_MODE             0x47860452
 112 #define CONFIG_SYS_DDR_MODE2            0x8080c000
 113
 114 #define CONFIG_SYS_DDR_TIMING_0 ((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
 115                                  (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
 116                                  (6 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
 117                                  (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
 118                                  (0 << TIMING_CFG0_WWT_SHIFT) | \
 119                                  (0 << TIMING_CFG0_RRT_SHIFT) | \
 120                                  (0 << TIMING_CFG0_WRT_SHIFT) | \
 121                                  (0 << TIMING_CFG0_RWT_SHIFT))
 122
 123 #define CONFIG_SYS_DDR_TIMING_1 ((      TIMING_CFG1_CASLAT_50) | \
 124                                  ( 2 << TIMING_CFG1_WRTORD_SHIFT) | \
 125                                  ( 2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
 126                                  ( 3 << TIMING_CFG1_WRREC_SHIFT) | \
 127                                  ( 7 << TIMING_CFG1_REFREC_SHIFT) | \
 128                                  ( 3 << TIMING_CFG1_ACTTORW_SHIFT) | \
 129                                  ( 8 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
 130                                  ( 3 << TIMING_CFG1_PRETOACT_SHIFT))
 131
 132 #define CONFIG_SYS_DDR_TIMING_2 ((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
 133                                  (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
 134                                  (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
 135                                  (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
 136                                  (4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
 137                                  (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
 138                                  (5 << TIMING_CFG2_CPO_SHIFT))
 139
 140 #define CONFIG_SYS_DDR_TIMING_3 0x00000000
 141
 142 /*
 143  * The reserved memory
 144  */
 145 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
 146 #define CONFIG_SYS_FLASH_BASE           0xF0000000
 147 #define CONFIG_SYS_FLASH_BASE_1         0xF2000000
 148 #define CONFIG_SYS_PIGGY_BASE           0xE8000000
 149 #define CONFIG_SYS_PIGGY_SIZE           128
 150 #define CONFIG_SYS_PAXE_BASE            0xA0000000
 151 #define CONFIG_SYS_PAXE_SIZE            512
 152
 153 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 154 #define CONFIG_SYS_RAMBOOT
 155 #else
 156 #undef  CONFIG_SYS_RAMBOOT
 157 #endif
 158
 159 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kB for Mon */
 160
 161 /*
 162  * Initial RAM Base Address Setup
 163  */
 164 #define CONFIG_SYS_INIT_RAM_LOCK        1
 165 #define CONFIG_SYS_INIT_RAM_ADDR        0xE6000000 /* Initial RAM address */
 166 #define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM */
 167 #define CONFIG_SYS_GBL_DATA_SIZE        0x100 /* num bytes initial data */
 168 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
 169
 170 /*
 171  * Local Bus Configuration & Clock Setup
 172  */
 173 #define CONFIG_SYS_LCRR         (LCRR_DBYP | LCRR_EADC_2 | LCRR_CLKDIV_4)
 174
 175 /*
 176  * Init Local Bus Memory Controller:
 177  *
 178  * Bank Bus     Machine PortSz  Size  Device
 179  * ---- ---     ------- ------  -----  ------
 180  *  0   Local   GPCM    16 bit  256MB FLASH
 181  *  1   Local   GPCM     8 bit  128MB GPIO/PIGGY
 182  *  3   Local   GPCM     8 bit  512MB PAXE
 183  *
 184  */
 185 /*
 186  * FLASH on the Local Bus
 187  */
 188 #define CONFIG_SYS_FLASH_CFI            /* use the Common Flash Interface */
 189 #define CONFIG_FLASH_CFI_DRIVER         /* use the CFI driver */
 190 #define CONFIG_SYS_FLASH_SIZE           256 /* max FLASH size is 256M */
 191 #define CONFIG_SYS_FLASH_PROTECTION     1
 192 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 193
 194 #define CONFIG_SYS_LBLAWBAR0_PRELIM     CONFIG_SYS_FLASH_BASE /* Window base at flash base */
 195 #define CONFIG_SYS_LBLAWAR0_PRELIM      0x8000001b /* 256MB window size */
 196
 197 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE | \
 198                                 (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
 199                                 BR_V)
 200
 201 #define CONFIG_SYS_OR0_PRELIM   (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) | \
 202                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 203                                 OR_GPCM_SCY_5 | \
 204                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 205
 206 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max num of flash banks       */
 207 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max num of sects on one chip */
 208 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_1 }
 209
 210 #undef  CONFIG_SYS_FLASH_CHECKSUM
 211
 212 /*
 213  * PRIO1/PIGGY on the local bus CS1
 214  */
 215 #define CONFIG_SYS_LBLAWBAR1_PRELIM     CONFIG_SYS_PIGGY_BASE /* Window base at flash base */
 216 #define CONFIG_SYS_LBLAWAR1_PRELIM      0x8000001A /* 128MB window size */
 217
 218 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_PIGGY_BASE | \
 219                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
 220                                 BR_V)
 221 #define CONFIG_SYS_OR1_PRELIM           (MEG_TO_AM(CONFIG_SYS_PIGGY_SIZE) | /* 128MB */ \
 222                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 223                                 OR_GPCM_SCY_2 | \
 224                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 225
 226 /*
 227  * PAXE on the local bus CS3
 228  */
 229 #define CONFIG_SYS_LBLAWBAR3_PRELIM     CONFIG_SYS_PAXE_BASE /* Window base at flash base */
 230 #define CONFIG_SYS_LBLAWAR3_PRELIM      0x8000001C /* 512MB window size */
 231
 232 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_PAXE_BASE | \
 233                                 (1 << BR_PS_SHIFT) | /* 8 bit port size */ \
 234                                 BR_V)
 235 #define CONFIG_SYS_OR3_PRELIM   (MEG_TO_AM(CONFIG_SYS_PAXE_SIZE) | \
 236                                 OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \
 237                                 OR_GPCM_SCY_2 | \
 238                                 OR_GPCM_TRLX | OR_GPCM_EAD)
 239
 240 /*
 241  * Serial Port
 242  */
 243 #define CONFIG_CONS_INDEX       1
 244 #undef  CONFIG_SERIAL_SOFTWARE_FIFO
 245 #define CONFIG_SYS_NS16550
 246 #define CONFIG_SYS_NS16550_SERIAL
 247 #define CONFIG_SYS_NS16550_REG_SIZE     1
 248 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 249
 250 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500)
 251 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600)
 252
 253 /* Pass open firmware flat tree */
 254 #define CONFIG_OF_LIBFDT        1
 255 #define CONFIG_OF_BOARD_SETUP   1
 256 #define CONFIG_OF_STDOUT_VIA_ALIAS
 257
 258 /*
 259  * General PCI
 260  * Addresses are mapped 1-1.
 261  */
 262 #undef CONFIG_PCI               /* No PCI */
 263
 264 #ifndef CONFIG_NET_MULTI
 265 #define CONFIG_NET_MULTI        1
 266 #endif
 267 /*
 268  * QE UEC ethernet configuration
 269  */
 270 #define CONFIG_UEC_ETH
 271 #define CONFIG_ETHPRIME         "FSL UEC0"
 272
 273 #define CONFIG_UEC_ETH1         /* GETH1 */
 274 #define UEC_VERBOSE_DEBUG       1
 275
 276 #ifdef CONFIG_UEC_ETH1
 277 #define CONFIG_SYS_UEC1_UCC_NUM 3       /* UCC4 */
 278 #define CONFIG_SYS_UEC1_RX_CLK          QE_CLK_NONE     /* not used in RMII Mode */
 279 #define CONFIG_SYS_UEC1_TX_CLK          QE_CLK17
 280 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 281 #define CONFIG_SYS_UEC1_PHY_ADDR        0
 282 #define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII
 283 #endif
 284
 285 /*
 286  * Environment
 287  */
 288
 289 #ifndef CONFIG_SYS_RAMBOOT
 290 #define CONFIG_ENV_IS_IN_FLASH  1
 291 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 292 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K(one sector) for env */
 293 #define CONFIG_ENV_OFFSET       (CONFIG_SYS_MONITOR_LEN)
 294
 295 /* Address and size of Redundant Environment Sector     */
 296 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 297 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 298
 299 #else /* CFG_RAMBOOT */
 300 #define CONFIG_SYS_NO_FLASH             1       /* Flash is not usable now */
 301 #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
 302 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 303 #define CONFIG_ENV_SIZE         0x2000
 304 #endif /* CFG_RAMBOOT */
 305
 306 /* I2C */
 307 #define CONFIG_HARD_I2C         /* I2C with hardware support */
 308 #undef  CONFIG_SOFT_I2C         /* I2C bit-banged */
 309 #define CONFIG_FSL_I2C
 310 #define CONFIG_SYS_I2C_SPEED    200000  /* I2C speed and slave address */
 311 #define CONFIG_SYS_I2C_SLAVE    0x7F
 312 #define CONFIG_SYS_I2C_OFFSET   0x3000
 313 #define CONFIG_I2C_MULTI_BUS    1
 314 #define CONFIG_I2C_MUX          1
 315
 316 /* EEprom support */
 317 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 318
 319 /* I2C SYSMON (LM75, AD7414 is almost compatible)                       */
 320 #define CONFIG_DTT_LM75         1       /* ON Semi's LM75               */
 321 #define CONFIG_DTT_SENSORS      {0, 1, 2, 3}    /* Sensor addresses             */
 322 #define CONFIG_SYS_DTT_MAX_TEMP 70
 323 #define CONFIG_SYS_DTT_LOW_TEMP -30
 324 #define CONFIG_SYS_DTT_HYSTERESIS       3
 325 #define CONFIG_SYS_DTT_BUS_NUM          (CONFIG_SYS_MAX_I2C_BUS)
 326
 327 #if defined(CONFIG_CMD_NAND)
 328 #define CONFIG_NAND_KMETER1
 329 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 330 #define CONFIG_SYS_NAND_BASE            CONFIG_SYS_PIGGY_BASE
 331 #endif
 332
 333 #if defined(CONFIG_PCI)
 334 #define CONFIG_CMD_PCI
 335 #endif
 336
 337 #if defined(CFG_RAMBOOT)
 338 #undef CONFIG_CMD_SAVEENV
 339 #undef CONFIG_CMD_LOADS
 340 #endif
 341
 342 /*
 343  * For booting Linux, the board info and command line data
 344  * have to be in the first 8 MB of memory, since this is
 345  * the maximum mapped by the Linux kernel during initialization.
 346  */
 347 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 348
 349 /*
 350  * Core HID Setup
 351  */
 352 #define CONFIG_SYS_HID0_INIT            0x000000000
 353 #define CONFIG_SYS_HID0_FINAL           HID0_ENABLE_MACHINE_CHECK
 354 #define CONFIG_SYS_HID2                 HID2_HBE
 355
 356 /*
 357  * MMU Setup
 358  */
 359
 360 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
 361
 362 /* DDR: cache cacheable */
 363 #define CONFIG_SYS_IBAT0L       (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
 364                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 365 #define CONFIG_SYS_IBAT0U       (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 366 #define CONFIG_SYS_DBAT0L       CONFIG_SYS_IBAT0L
 367 #define CONFIG_SYS_DBAT0U       CONFIG_SYS_IBAT0U
 368
 369 /* IMMRBAR & PCI IO: cache-inhibit and guarded */
 370 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_IMMR | BATL_PP_10 | \
 371                                 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 372 #define CONFIG_SYS_IBAT1U       (CONFIG_SYS_IMMR | BATU_BL_4M | BATU_VS | BATU_VP)
 373 #define CONFIG_SYS_DBAT1L       CONFIG_SYS_IBAT1L
 374 #define CONFIG_SYS_DBAT1U       CONFIG_SYS_IBAT1U
 375
 376 /* PRIO1, PIGGY:  icache cacheable, but dcache-inhibit and guarded */
 377 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 378 #define CONFIG_SYS_IBAT2U       (CONFIG_SYS_PIGGY_BASE | BATU_BL_128M | BATU_VS | BATU_VP)
 379 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PIGGY_BASE | BATL_PP_10 | \
 380                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 381 #define CONFIG_SYS_DBAT2U       CONFIG_SYS_IBAT2U
 382
 383 /* FLASH: icache cacheable, but dcache-inhibit and guarded */
 384 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 385 #define CONFIG_SYS_IBAT3U       (CONFIG_SYS_FLASH_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 386 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_FLASH_BASE | BATL_PP_10 | \
 387                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 388 #define CONFIG_SYS_DBAT3U       CONFIG_SYS_IBAT3U
 389
 390 /* Stack in dcache: cacheable, no memory coherence */
 391 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10)
 392 #define CONFIG_SYS_IBAT4U       (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
 393 #define CONFIG_SYS_DBAT4L       CONFIG_SYS_IBAT4L
 394 #define CONFIG_SYS_DBAT4U       CONFIG_SYS_IBAT4U
 395
 396 /* PAXE:  icache cacheable, but dcache-inhibit and guarded */
 397 #define CONFIG_SYS_IBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 398 #define CONFIG_SYS_IBAT5U       (CONFIG_SYS_PAXE_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
 399 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_PAXE_BASE | BATL_PP_10 | \
 400                                  BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 401 #define CONFIG_SYS_DBAT5U       CONFIG_SYS_IBAT5U
 402
 403 #ifdef CONFIG_PCI
 404 /* PCI MEM space: cacheable */
 405 #define CFG_IBAT6L      (CFG_PCI1_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
 406 #define CFG_IBAT6U      (CFG_PCI1_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 407 #define CFG_DBAT6L      CFG_IBAT6L
 408 #define CFG_DBAT6U      CFG_IBAT6U
 409 /* PCI MMIO space: cache-inhibit and guarded */
 410 #define CFG_IBAT7L      (CFG_PCI1_MMIO_PHYS | BATL_PP_10 | \
 411                          BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
 412 #define CFG_IBAT7U      (CFG_PCI1_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
 413 #define CFG_DBAT7L      CFG_IBAT7L
 414 #define CFG_DBAT7U      CFG_IBAT7U
 415 #else /* CONFIG_PCI */
 416 #define CONFIG_SYS_IBAT6L       (0)
 417 #define CONFIG_SYS_IBAT6U       (0)
 418 #define CONFIG_SYS_IBAT7L       (0)
 419 #define CONFIG_SYS_IBAT7U       (0)
 420 #define CONFIG_SYS_DBAT6L       CONFIG_SYS_IBAT6L
 421 #define CONFIG_SYS_DBAT6U       CONFIG_SYS_IBAT6U
 422 #define CONFIG_SYS_DBAT7L       CONFIG_SYS_IBAT7L
 423 #define CONFIG_SYS_DBAT7U       CONFIG_SYS_IBAT7U
 424 #endif /* CONFIG_PCI */
 425
 426 /*
 427  * Internal Definitions
 428  *
 429  * Boot Flags
 430  */
 431 #define BOOTFLAG_COLD   0x01 /* Normal Power-On: Boot from FLASH */
 432 #define BOOTFLAG_WARM   0x02 /* Software reboot */
 433
 434 #define BOOTFLASH_START F0000000
 435
 436 #define CONFIG_PRAM     512     /* protected RAM [KBytes] */
 437
 438 #define MTDIDS_DEFAULT          "nor2=app"
 439 #define MTDPARTS_DEFAULT \
 440         "mtdparts=app:256k(u-boot),128k(env),128k(envred),"     \
 441         "1536k(esw0),8704k(rootfs0),1536k(esw1),2432k(rootfs1),640k(var),768k(cfg)"
 442
 443 /*
 444  * Environment Configuration
 445  */
 446 #define CONFIG_ENV_OVERWRITE
 447 #ifndef CONFIG_KM_DEF_ENV               /* if not set by keymile-common.h */
 448 #define CONFIG_KM_DEF_ENV "km-common=empty\0"
 449 #endif
 450
 451 #define CONFIG_EXTRA_ENV_SETTINGS \
 452        CONFIG_KM_DEF_ENV                                                \
 453         "rootpath=/opt/eldk/ppc_82xx\0"                                 \
 454         "addcon=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 455         "ramdisk_file=/tftpboot/kmeter1/uRamdisk\0"                     \
 456         "loadram=tftp ${ramdisk_addr_r} ${ramdisk_file}\0"              \
 457         "loadfdt=tftp ${fdt_addr_r} ${fdt_file}\0"                      \
 458         "loadkernel=tftp ${kernel_addr_r} ${bootfile}\0"                \
 459         "unlock=yes\0"                                                  \
 460         "fdt_addr=F0080000\0"                                           \
 461         "kernel_addr=F00a0000\0"                                        \
 462         "ramdisk_addr=F03a0000\0"                                       \
 463         "ramdisk_addr_r=F10000\0"                                       \
 464         "EEprom_ivm=pca9547:70:9\0"                                     \
 465         "dtt_bus=pca9547:70:a\0"                                        \
 466         "mtdids=nor0=app \0"                                            \
 467         "mtdparts=" MK_STR(MTDPARTS_DEFAULT) "\0"                       \
 468    ""
 469
 470 #if defined(CONFIG_UEC_ETH)
 471 #define CONFIG_HAS_ETH0
 472 #endif
 473
 474 #endif /* __CONFIG_H */