include/configs/korat.h

   1 /*
   2  * (C) Copyright 2007-2009
   3  * Larry Johnson, lrj@acm.org
   4  *
   5  * (C) Copyright 2006-2007
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * (C) Copyright 2006
   9  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
  10  * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
  11  *
  12  * This program is free software; you can redistribute it and/or
  13  * modify it under the terms of the GNU General Public License as
  14  * published by the Free Software Foundation; either version 2 of
  15  * the License, or (at your option) any later version.
  16  *
  17  * This program is distributed in the hope that it will be useful,
  18  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  19  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  20  * GNU General Public License for more details.
  21  *
  22  * You should have received a copy of the GNU General Public License
  23  * along with this program; if not, write to the Free Software
  24  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  25  * MA 02111-1307 USA
  26  */
  27
  28 /*
  29  * korat.h - configuration for Korat board
  30  */
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*
  35  * High Level Configuration Options
  36  */
  37 #define CONFIG_440EPX           1       /* Specific PPC440EPx           */
  38 #define CONFIG_4xx              1       /* ... PPC4xx family            */
  39 #define CONFIG_SYS_CLK_FREQ     33333333
  40
  41 #ifdef CONFIG_KORAT_PERMANENT
  42 #define CONFIG_SYS_TEXT_BASE    0xFFFA0000
  43 #else
  44 #define CONFIG_SYS_TEXT_BASE    0xF7F60000
  45 #endif
  46
  47 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  48 #define CONFIG_MISC_INIT_R      1       /* Call misc_init_r             */
  49
  50 /*
  51  * Manufacturer's information serial EEPROM parameters
  52  */
  53 #define MAN_DATA_EEPROM_ADDR    0x53    /* EEPROM I2C address           */
  54 #define MAN_INFO_FIELD          2
  55 #define MAN_INFO_LENGTH         9
  56 #define MAN_MAC_ADDR_FIELD      3
  57 #define MAN_MAC_ADDR_LENGTH     12
  58
  59 /*
  60  * Base addresses -- Note these are effective addresses where the actual
  61  * resources get mapped (not physical addresses).
  62  */
  63 #define CONFIG_SYS_MONITOR_LEN          (384 * 1024) /* Reserve 384 kiB for Monitor  */
  64 #define CONFIG_SYS_MALLOC_LEN           (256 * 1024) /* Reserve 256 kiB for malloc() */
  65
  66 #define CONFIG_SYS_SDRAM_BASE           0x00000000      /* _must_ be 0          */
  67 #define CONFIG_SYS_FLASH0_SIZE          0x01000000
  68 #define CONFIG_SYS_FLASH0_ADDR          (-CONFIG_SYS_FLASH0_SIZE)
  69 #define CONFIG_SYS_FLASH1_TOP           0xF8000000
  70 #define CONFIG_SYS_FLASH1_MAX_SIZE      0x08000000
  71 #define CONFIG_SYS_FLASH1_ADDR          (CONFIG_SYS_FLASH1_TOP - CONFIG_SYS_FLASH1_MAX_SIZE)
  72 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_FLASH1_ADDR  /* start of FLASH       */
  73 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
  74 #define CONFIG_SYS_OCM_BASE             0xe0010000      /* ocm                  */
  75 #define CONFIG_SYS_OCM_DATA_ADDR        CONFIG_SYS_OCM_BASE
  76 #define CONFIG_SYS_PCI_BASE             0xe0000000      /* Internal PCI regs    */
  77 #define CONFIG_SYS_PCI_MEMBASE          0x80000000      /* mapped pci memory    */
  78 #define CONFIG_SYS_PCI_MEMBASE2         (CONFIG_SYS_PCI_MEMBASE + 0x20000000)
  79
  80 #define CONFIG_SYS_USB2D0_BASE          0xe0000100
  81 #define CONFIG_SYS_USB_DEVICE           0xe0000000
  82 #define CONFIG_SYS_USB_HOST             0xe0000400
  83 #define CONFIG_SYS_CPLD_BASE            0xc0000000
  84
  85 /*
  86  * Initial RAM & stack pointer
  87  */
  88 /* 440EPx has 16KB of internal SRAM, so no need for D-Cache             */
  89 #undef CONFIG_SYS_INIT_RAM_DCACHE
  90 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_BASE     /* OCM                  */
  91 #define CONFIG_SYS_INIT_RAM_SIZE        (4 << 10)
  92 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  93 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
  94
  95 /*
  96  * Serial Port
  97  */
  98 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
  99 #define CONFIG_SYS_NS16550
 100 #define CONFIG_SYS_NS16550_SERIAL
 101 #define CONFIG_SYS_NS16550_REG_SIZE     1
 102 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 103 #define CONFIG_SYS_EXT_SERIAL_CLOCK     11059200        /* ext. 11.059MHz clk   */
 104 #define CONFIG_BAUDRATE         115200
 105
 106 #define CONFIG_SYS_BAUDRATE_TABLE                                               \
 107         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 108
 109 /*
 110  * Environment
 111  */
 112 #define CONFIG_ENV_IS_IN_FLASH  1       /* use FLASH for environ vars   */
 113
 114 /*
 115  * FLASH related
 116  */
 117 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible        */
 118 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver              */
 119 #define CONFIG_FLASH_CFI_LEGACY         /* Allow hard-coded config for FLASH0 */
 120
 121 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH1_ADDR, CONFIG_SYS_FLASH0_ADDR }
 122
 123 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks         */
 124 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* max number of sectors on one chip  */
 125
 126 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)    */
 127 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)    */
 128
 129 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)   */
 130 #define CONFIG_SYS_FLASH_PROTECTION     1       /* use hardware flash protection      */
 131
 132 #define CONFIG_SYS_FLASH_EMPTY_INFO           /* print 'E' for empty sector on flinfo */
 133 #define CONFIG_SYS_FLASH_QUIET_TEST     1       /* don't warn upon unknown flash      */
 134
 135 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector        */
 136 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH1_TOP - CONFIG_ENV_SECT_SIZE)
 137 #define CONFIG_ENV_SIZE         0x2000  /* Total Size of Environment Sector   */
 138
 139 /* Address and size of Redundant Environment Sector */
 140 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
 141 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 142
 143 /*
 144  * DDR SDRAM
 145  */
 146 #define CONFIG_DDR_DATA_EYE             /* use DDR2 optimization        */
 147 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for setup     */
 148 #define CONFIG_ZERO_SDRAM               /* Zero SDRAM after setup       */
 149 #define CONFIG_DDR_ECC                  /* Use ECC when available       */
 150 #define SPD_EEPROM_ADDRESS      {0x50}
 151 #define CONFIG_PROG_SDRAM_TLB
 152 #define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4 KiB as    */
 153                                         /* per 440EPx Errata CHIP_11    */
 154
 155 /*
 156  * I2C
 157  */
 158 #define CONFIG_HARD_I2C         1       /* I2C with hardware support    */
 159 #define CONFIG_PPC4XX_I2C               /* use PPC4xx driver            */
 160 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 161 #define CONFIG_SYS_I2C_SLAVE            0x7F
 162
 163 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 164 #define CONFIG_SYS_I2C_EEPROM_ADDR      (0xa8>>1)
 165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 166 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 167 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
 168
 169 /* I2C RTC */
 170 #define CONFIG_RTC_M41T60       1
 171 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 172
 173 /* I2C SYSMON (LM73)                                                    */
 174 #define CONFIG_DTT_LM73         1       /* National Semi's LM73         */
 175 #define CONFIG_DTT_SENSORS      {2}     /* Sensor addresses             */
 176 #define CONFIG_SYS_DTT_MAX_TEMP 70
 177 #define CONFIG_SYS_DTT_MIN_TEMP -30
 178
 179 #define CONFIG_PREBOOT  "echo;"                                         \
 180         "echo Type \\\"run flash_cf\\\" to mount from CompactFlash(R);" \
 181         "echo"
 182
 183 #undef  CONFIG_BOOTARGS
 184
 185 /* Setup some board specific values for the default environment variables */
 186 #define CONFIG_HOSTNAME         korat
 187
 188 /* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */
 189 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 190         "u_boot=korat/u-boot.bin\0"                                     \
 191         "load=tftp 200000 ${u_boot}\0"                                  \
 192         "update=protect off F7F60000 F7FBFFFF;erase F7F60000 F7FBFFFF;" \
 193                 "cp.b ${fileaddr} F7F60000 ${filesize};protect on "     \
 194                 "F7F60000 F7FBFFFF\0"                                   \
 195         "upd=run load update\0"                                         \
 196         "bootfile=korat/uImage\0"                                       \
 197         "dtb=korat/korat.dtb\0"                                         \
 198         "kernel_addr=F4000000\0"                                        \
 199         "ramdisk_addr=F4400000\0"                                       \
 200         "dtb_addr=F41E0000\0"                                           \
 201         "udl=tftp 200000 ${bootfile}; erase F4000000 F41DFFFF; "        \
 202                 "cp.b ${fileaddr} F4000000 ${filesize}\0"               \
 203         "udd=tftp 200000 ${dtb}; erase F41E0000 F41FFFFF; "             \
 204                 "cp.b ${fileaddr} F41E0000 ${filesize}\0"               \
 205         "ll=setenv kernel_addr 200000; setenv dtb_addr 1000000; "       \
 206                 "tftp ${kernel_addr} ${uImage}; tftp ${dtb_addr} "      \
 207                 "${dtb}\0"                                              \
 208         "rd_size=73728\0"                                               \
 209         "ramargs=setenv bootargs root=/dev/ram rw "                     \
 210                 "ramdisk_size=${rd_size}\0"                             \
 211         "usbdev=sda1\0"                                                 \
 212         "usbargs=setenv bootargs root=/dev/${usbdev} ro rootdelay=10\0" \
 213         "rootpath=/opt/eldk/ppc_4xxFP\0"                                \
 214         "netdev=eth0\0"                                                 \
 215         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 216                 "nfsroot=${serverip}:${rootpath}\0"                     \
 217         "pciclk=33\0"                                                   \
 218         "addide=setenv bootargs ${bootargs} ide=reverse "               \
 219                 "idebus=${pciclk}\0"                                    \
 220         "addip=setenv bootargs ${bootargs} "                            \
 221                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 222                 ":${hostname}:${netdev}:off panic=1\0"                  \
 223         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
 224         "flash_cf=run usbargs addide addip addtty; "                    \
 225                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 226         "flash_nfs=run nfsargs addide addip addtty; "                   \
 227                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 228         "flash_self=run ramargs addip addtty; "                         \
 229                 "bootm ${kernel_addr} ${ramdisk_addr} ${dtb_addr}\0"    \
 230         ""
 231
 232 #define CONFIG_BOOTCOMMAND      "run flash_cf"
 233
 234 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 235
 236 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 237 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change        */
 238
 239 #define CONFIG_PPC4xx_EMAC
 240 #define CONFIG_IBM_EMAC4_V4     1
 241 #define CONFIG_MII              1       /* MII PHY management           */
 242 #define CONFIG_PHY_ADDR         2       /* PHY address, See schematics  */
 243 #define CONFIG_PHY_DYNAMIC_ANEG 1
 244
 245 #undef CONFIG_PHY_RESET                 /* Don't do software PHY reset  */
 246 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 247
 248 #define CONFIG_HAS_ETH0
 249 #define CONFIG_SYS_RX_ETH_BUFFER        32      /* Number of ethernet rx        */
 250                                         /*   buffers & descriptors      */
 251 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
 252 #define CONFIG_PHY1_ADDR        3
 253
 254 /* USB */
 255 #define CONFIG_USB_OHCI
 256 #define CONFIG_USB_STORAGE
 257
 258 /* Comment this out to enable USB 1.1 device */
 259 #define USB_2_0_DEVICE
 260
 261 /* Partitions */
 262 #define CONFIG_MAC_PARTITION
 263 #define CONFIG_DOS_PARTITION
 264 #define CONFIG_ISO_PARTITION
 265
 266 /*
 267  * BOOTP options
 268  */
 269 #define CONFIG_BOOTP_BOOTFILESIZE
 270 #define CONFIG_BOOTP_BOOTPATH
 271 #define CONFIG_BOOTP_GATEWAY
 272 #define CONFIG_BOOTP_HOSTNAME
 273 #define CONFIG_BOOTP_SUBNETMASK
 274
 275 /*
 276  * Command line configuration.
 277  */
 278 #include <config_cmd_default.h>
 279
 280 #define CONFIG_CMD_ASKENV
 281 #define CONFIG_CMD_DATE
 282 #define CONFIG_CMD_DHCP
 283 #define CONFIG_CMD_DTT
 284 #define CONFIG_CMD_DIAG
 285 #define CONFIG_CMD_EEPROM
 286 #define CONFIG_CMD_ELF
 287 #define CONFIG_CMD_FAT
 288 #define CONFIG_CMD_I2C
 289 #define CONFIG_CMD_IRQ
 290 #define CONFIG_CMD_MII
 291 #define CONFIG_CMD_NET
 292 #define CONFIG_CMD_NFS
 293 #define CONFIG_CMD_PCI
 294 #define CONFIG_CMD_PING
 295 #define CONFIG_CMD_REGINFO
 296 #define CONFIG_CMD_SDRAM
 297 #define CONFIG_CMD_USB
 298
 299 /* POST support */
 300 #define CONFIG_POST             (CONFIG_SYS_POST_CACHE  | \
 301                                  CONFIG_SYS_POST_CPU    | \
 302                                  CONFIG_SYS_POST_ECC    | \
 303                                  CONFIG_SYS_POST_ETHER  | \
 304                                  CONFIG_SYS_POST_FPU    | \
 305                                  CONFIG_SYS_POST_I2C    | \
 306                                  CONFIG_SYS_POST_MEMORY | \
 307                                  CONFIG_SYS_POST_RTC    | \
 308                                  CONFIG_SYS_POST_SPR    | \
 309                                  CONFIG_SYS_POST_UART)
 310
 311 #define CONFIG_LOGBUFFER
 312 #define CONFIG_SYS_POST_CACHE_ADDR      0xC8000000      /* free virtual address     */
 313
 314 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* Otherwise it catches logbuffer as output */
 315
 316 #define CONFIG_SUPPORT_VFAT
 317
 318 /*
 319  * Miscellaneous configurable options
 320  */
 321 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 322 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt       */
 323 #if defined(CONFIG_CMD_KGDB)
 324 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 325 #else
 326 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 327 #endif
 328 #define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 329                                         /* Print Buffer Size            */
 330 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 331 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size  */
 332
 333 #define CONFIG_SYS_MEMTEST_START        0x0400000 /* memtest works on           */
 334 #define CONFIG_SYS_MEMTEST_END          0x0C00000 /* 4 ... 12 MB in DRAM        */
 335
 336 #define CONFIG_SYS_LOAD_ADDR            0x100000  /* default load address       */
 337 #define CONFIG_SYS_EXTBDINFO            1  /* To use extended board_into (bd_t) */
 338
 339 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 340
 341 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 342 #define CONFIG_LOOPW            1       /* enable loopw command         */
 343 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
 344 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 345 #define CONFIG_VERSION_VARIABLE 1       /* include version env variable */
 346
 347 /*
 348  * Korat-specific options
 349  */
 350 #define CONFIG_SYS_KORAT_MAN_RESET_MS   10000   /* timeout for manufacturer reset */
 351
 352 /*
 353  * PCI stuff
 354  */
 355 /* General PCI */
 356 #define CONFIG_PCI                      /* include pci support          */
 357 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 358 #define CONFIG_PCI_PNP                  /* do pci plug-and-play         */
 359 #define CONFIG_SYS_PCI_CACHE_LINE_SIZE  0       /* to avoid problems with PNP   */
 360 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 361 #define CONFIG_SYS_PCI_TARGBASE 0x80000000      /* PCIaddr mapped to    */
 362                                                 /*   CONFIG_SYS_PCI_MEMBASE     */
 363 /* Board-specific PCI */
 364 #define CONFIG_SYS_PCI_TARGET_INIT
 365 #define CONFIG_SYS_PCI_MASTER_INIT
 366 #define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ
 367
 368 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8   /* AMCC                         */
 369 #define CONFIG_SYS_PCI_SUBSYS_ID       0xcafe   /* Whatever                     */
 370
 371 /*
 372  * For booting Linux, the board info and command line data have to be in the
 373  * first 8 MB of memory, since this is the maximum mapped by the Linux kernel
 374  * during initialization.
 375  */
 376 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20) /* Initial Memory map for Linux */
 377
 378 /*
 379  * External Bus Controller (EBC) Setup
 380  */
 381
 382 /* Memory Bank 0 (NOR-FLASH) initialization                             */
 383 #if CONFIG_SYS_FLASH0_SIZE == 0x01000000
 384 #define CONFIG_SYS_EBC_PB0AP            0x04017300
 385 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH0_ADDR | 0x0009A000)
 386 #elif CONFIG_SYS_FLASH0_SIZE == 0x04000000
 387 #define CONFIG_SYS_EBC_PB0AP            0x04017300
 388 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH0_ADDR | 0x000DA000)
 389 #else
 390 #error Unable to configure chip select for current CONFIG_SYS_FLASH0_SIZE
 391 #endif
 392
 393 /* Memory Bank 1 (NOR-FLASH) initialization                             */
 394 #if CONFIG_SYS_FLASH1_MAX_SIZE == 0x08000000
 395 #define CONFIG_SYS_EBC_PB1AP            0x04017300
 396 #define CONFIG_SYS_EBC_PB1CR            (CONFIG_SYS_FLASH1_ADDR | 0x000FA000)
 397 #else
 398 #error Unable to configure chip select for current CONFIG_SYS_FLASH1_MAX_SIZE
 399 #endif
 400
 401 /* Memory Bank 2 (CPLD) initialization                                  */
 402 #define CONFIG_SYS_EBC_PB2AP            0x04017300
 403 #define CONFIG_SYS_EBC_PB2CR            (CONFIG_SYS_CPLD_BASE | 0x00038000)
 404
 405 /*
 406  * GPIO Setup
 407  *
 408  * Korat GPIO usage:
 409  *
 410  *                   Init.
 411  * Pin    Source I/O value Function
 412  * ------ ------ --- ----- ---------------------------------
 413  * GPIO00  Alt1  I/O   x   PerAddr07
 414  * GPIO01  Alt1  I/O   x   PerAddr06
 415  * GPIO02  Alt1  I/O   x   PerAddr05
 416  * GPIO03  GPIO   x    x   GPIO03 to expansion bus connector
 417  * GPIO04  GPIO   x    x   GPIO04 to expansion bus connector
 418  * GPIO05  GPIO   x    x   GPIO05 to expansion bus connector
 419  * GPIO06  Alt1   O    x   PerCS1 (2nd NOR flash)
 420  * GPIO07  Alt1   O    x   PerCS2 (CPLD)
 421  * GPIO08  Alt1   O    x   PerCS3 to expansion bus connector
 422  * GPIO09  Alt1   O    x   PerCS4 to expansion bus connector
 423  * GPIO10  Alt1   O    x   PerCS5 to expansion bus connector
 424  * GPIO11  Alt1   I    x   PerErr
 425  * GPIO12  GPIO   O    0   ATMega !Reset
 426  * GPIO13  GPIO   x    x   Test Point 2 (TP2)
 427  * GPIO14  GPIO   O    1   Write protect EEPROM #1 (0xA8)
 428  * GPIO15  GPIO   O    0   CPU Run LED !On
 429  * GPIO16  Alt1   O    x   GMC1TxD0
 430  * GPIO17  Alt1   O    x   GMC1TxD1
 431  * GPIO18  Alt1   O    x   GMC1TxD2
 432  * GPIO19  Alt1   O    x   GMC1TxD3
 433  * GPIO20  Alt1   I    x   RejectPkt0
 434  * GPIO21  Alt1   I    x   RejectPkt1
 435  * GPIO22  GPIO   I    x   PGOOD_DDR
 436  * GPIO23  Alt1   O    x   SCPD0
 437  * GPIO24  Alt1   O    x   GMC0TxD2
 438  * GPIO25  Alt1   O    x   GMC0TxD3
 439  * GPIO26  GPIO? I/O   x   IIC0SDA (selected in SDR0_PFC4)
 440  * GPIO27  GPIO   O    0   PHY #0 1000BASE-X select
 441  * GPIO28  GPIO   O    0   PHY #1 1000BASE-X select
 442  * GPIO29  GPIO   I    x   Test jumper !Present
 443  * GPIO30  GPIO   I    x   SFP module #0 !Present
 444  * GPIO31  GPIO   I    x   SFP module #1 !Present
 445  *
 446  * GPIO32  GPIO   O    1   SFP module #0 Tx !Enable
 447  * GPIO33  GPIO   O    1   SFP module #1 Tx !Enable
 448  * GPIO34  Alt2   I    x   !UART1_CTS
 449  * GPIO35  Alt2   O    x   !UART1_RTS
 450  * GPIO36  Alt1   I    x   !UART0_CTS
 451  * GPIO37  Alt1   O    x   !UART0_RTS
 452  * GPIO38  Alt2   O    x   UART1_Tx
 453  * GPIO39  Alt2   I    x   UART1_Rx
 454  * GPIO40  Alt1   I    x   IRQ0 (Ethernet 0)
 455  * GPIO41  Alt1   I    x   IRQ1 (Ethernet 1)
 456  * GPIO42  Alt1   I    x   IRQ2 (PCI interrupt)
 457  * GPIO43  Alt1   I    x   IRQ3 (System Alert from CPLD)
 458  * GPIO44  xxxx   x    x   (grounded through pulldown)
 459  * GPIO45  GPIO   O    0   PHY #0 Enable
 460  * GPIO46  GPIO   O    0   PHY #1 Enable
 461  * GPIO47  GPIO   I    x   Reset switch !Pressed
 462  * GPIO48  GPIO   I    x   Shutdown switch !Pressed
 463  * GPIO49  xxxx   x    x   (reserved for trace port)
 464  *   .      .     .    .               .
 465  *   .      .     .    .               .
 466  *   .      .     .    .               .
 467  * GPIO63  xxxx   x    x   (reserved for trace port)
 468  */
 469
 470 #define CONFIG_SYS_GPIO_ATMEGA_RESET_   12
 471 #define CONFIG_SYS_GPIO_ATMEGA_SS_      13
 472 #define CONFIG_SYS_GPIO_PHY0_FIBER_SEL  27
 473 #define CONFIG_SYS_GPIO_PHY1_FIBER_SEL  28
 474 #define CONFIG_SYS_GPIO_SFP0_PRESENT_   30
 475 #define CONFIG_SYS_GPIO_SFP1_PRESENT_   31
 476 #define CONFIG_SYS_GPIO_SFP0_TX_EN_     32
 477 #define CONFIG_SYS_GPIO_SFP1_TX_EN_     33
 478 #define CONFIG_SYS_GPIO_PHY0_EN 45
 479 #define CONFIG_SYS_GPIO_PHY1_EN 46
 480 #define CONFIG_SYS_GPIO_RESET_PRESSED_  47
 481
 482 /*
 483  * PPC440 GPIO Configuration
 484  */
 485 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 486 {                                                                                       \
 487 /* GPIO Core 0 */                                                                       \
 488 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7)     DMA_REQ(2)      */      \
 489 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6)     DMA_ACK(2)      */      \
 490 {GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5)     DMA_EOT/TC(2)   */      \
 491 {GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4)     DMA_REQ(3)      */      \
 492 {GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3)     DMA_ACK(3)      */      \
 493 {GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2)     DMA_EOT/TC(3)   */      \
 494 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1)                     */      \
 495 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2)                     */      \
 496 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3)                     */      \
 497 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4)                     */      \
 498 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5)                    */      \
 499 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR                    */      \
 500 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12                                */      \
 501 {GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO13                                */      \
 502 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14                                */      \
 503 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15                                */      \
 504 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4)                      */      \
 505 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5)                      */      \
 506 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6)                      */      \
 507 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7)                      */      \
 508 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0                     */      \
 509 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1                     */      \
 510 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22                                */      \
 511 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0                          */      \
 512 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2)                      */      \
 513 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3)                      */      \
 514 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26                                */      \
 515 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ    USB2D_RXERROR   */      \
 516 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28                USB2D_TXVALID   */      \
 517 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA   USB2D_PAD_SUSPNDM */    \
 518 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK    USB2D_XCVRSELECT*/      \
 519 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/      \
 520 },                                                                                      \
 521 {                                                                                       \
 522 /* GPIO Core 1 */                                                                       \
 523 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0  EBC_DATA(2)     */      \
 524 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1  EBC_DATA(3)     */      \
 525 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N    UART1_DSR_CTS_N UART2_SOUT*/ \
 526 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
 527 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0)   UART3_SIN*/ \
 528 {GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N    EBC_DATA(1)     UART3_SOUT*/ \
 529 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N    UART1_SOUT      */      \
 530 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N     UART1_SIN       */      \
 531 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0)                     */      \
 532 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1)                     */      \
 533 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2)                     */      \
 534 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3)                     */      \
 535 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4)     DMA_ACK(1)      */      \
 536 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6)     DMA_EOT/TC(1)   */      \
 537 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7)     DMA_REQ(0)      */      \
 538 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8)     DMA_ACK(0)      */      \
 539 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9)     DMA_EOT/TC(0)   */      \
 540 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49  Unselect via TraceSelect Bit  */      \
 541 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50  Unselect via TraceSelect Bit  */      \
 542 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51  Unselect via TraceSelect Bit  */      \
 543 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52  Unselect via TraceSelect Bit  */      \
 544 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53  Unselect via TraceSelect Bit  */      \
 545 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54  Unselect via TraceSelect Bit  */      \
 546 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55  Unselect via TraceSelect Bit  */      \
 547 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit  */      \
 548 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57  Unselect via TraceSelect Bit  */      \
 549 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit  */      \
 550 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit  */      \
 551 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit  */      \
 552 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit  */      \
 553 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62  Unselect via TraceSelect Bit  */      \
 554 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63  Unselect via TraceSelect Bit  */      \
 555 }                                                                                       \
 556 }
 557
 558 #if defined(CONFIG_CMD_KGDB)
 559 #define CONFIG_KGDB_BAUDRATE    230400 /* speed to run kgdb serial port */
 560 #define CONFIG_KGDB_SER_INDEX   2       /* which serial port to use     */
 561 #endif
 562
 563 /* Pass open firmware flat tree */
 564 #define CONFIG_OF_LIBFDT        1
 565 #define CONFIG_OF_BOARD_SETUP   1
 566
 567 #endif /* __CONFIG_H */