include/configs/ls1012a2g5rdb.h

   1 /*
   2  * Copyright 2017 NXP
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1012A2G5RDB_H__
   8 #define __LS1012A2G5RDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  15 #define CONFIG_NR_DRAM_BANKS            2
  16 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  17 #define CONFIG_CMD_MEMINFO
  18 #define CONFIG_SYS_MEMTEST_START        0x80000000
  19 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  20
  21 /*  MMC  */
  22 #ifdef CONFIG_MMC
  23 #define CONFIG_FSL_ESDHC
  24 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  25 #endif
  26
  27 /* SATA */
  28 #define CONFIG_LIBATA
  29 #define CONFIG_SCSI_AHCI
  30 #define CONFIG_SCSI_AHCI_PLAT
  31
  32 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  33
  34 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  35 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  36 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  37                                                 CONFIG_SYS_SCSI_MAX_LUN)
  38 #define CONFIG_NET_MULTI
  39
  40 #define CONFIG_CMD_MEMINFO
  41 #define CONFIG_SYS_MEMTEST_START        0x80000000
  42 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  43
  44 #undef CONFIG_EXTRA_ENV_SETTINGS
  45 #define CONFIG_EXTRA_ENV_SETTINGS               \
  46         "verify=no\0"                           \
  47         "fdt_high=0xffffffffffffffff\0"         \
  48         "initrd_high=0xffffffffffffffff\0"      \
  49         "fdt_addr=0x00f00000\0"                 \
  50         "kernel_addr=0x01000000\0"              \
  51         "kernelheader_addr=0x800000\0"          \
  52         "scriptaddr=0x80000000\0"               \
  53         "scripthdraddr=0x80080000\0"            \
  54         "fdtheader_addr_r=0x80100000\0"         \
  55         "kernelheader_addr_r=0x80200000\0"      \
  56         "kernel_addr_r=0x81000000\0"            \
  57         "fdt_addr_r=0x90000000\0"               \
  58         "load_addr=0xa0000000\0"                \
  59         "kernel_size=0x2800000\0"               \
  60         "kernelheader_size=0x40000\0"           \
  61         "console=ttyS0,115200\0"                \
  62         BOOTENV                                 \
  63         "boot_scripts=ls1012ardb_boot.scr\0"    \
  64         "boot_script_hdr=hdr_ls1012ardb_bs.out\0"       \
  65         "scan_dev_for_boot_part="               \
  66              "part list ${devtype} ${devnum} devplist; "        \
  67              "env exists devplist || setenv devplist 1; "       \
  68              "for distro_bootpart in ${devplist}; do "          \
  69                   "if fstype ${devtype} "                       \
  70                       "${devnum}:${distro_bootpart} "           \
  71                       "bootfstype; then "                       \
  72                       "run scan_dev_for_boot; " \
  73                   "fi; "                        \
  74               "done\0"                          \
  75         "scan_dev_for_boot="                              \
  76                 "echo Scanning ${devtype} "               \
  77                                 "${devnum}:${distro_bootpart}...; "  \
  78                 "for prefix in ${boot_prefixes}; do "     \
  79                         "run scan_dev_for_scripts; "      \
  80                 "done;"                                   \
  81                 "\0"                                      \
  82         "boot_a_script="                                  \
  83                 "load ${devtype} ${devnum}:${distro_bootpart} "  \
  84                         "${scriptaddr} ${prefix}${script}; "    \
  85                 "env exists secureboot && load ${devtype} "     \
  86                         "${devnum}:${distro_bootpart} "         \
  87                         "${scripthdraddr} ${prefix}${boot_script_hdr} " \
  88                         "&& esbc_validate ${scripthdraddr};"    \
  89                 "source ${scriptaddr}\0"          \
  90         "installer=load mmc 0:2 $load_addr "    \
  91                    "/flex_installer_arm64.itb; "        \
  92                    "bootm $load_addr#$board\0"  \
  93         "qspi_bootcmd=echo Trying load from qspi..;"    \
  94                 "sf probe && sf read $load_addr "       \
  95                 "$kernel_addr $kernel_size; env exists secureboot "     \
  96                 "&& sf read $kernelheader_addr_r $kernelheader_addr "   \
  97                 "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
  98                 "bootm $load_addr#$board\0"
  99
 100 #undef CONFIG_BOOTCOMMAND
 101 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 102 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
 103                            "env exists secureboot && esbc_halt;"
 104 #endif
 105
 106 #define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
 107 #define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
 108
 109 #include <asm/fsl_secure_boot.h>
 110
 111 #endif /* __LS1012A2G5RDB_H__ */