include/configs/ls1012afrdm.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2016 Freescale Semiconductor, Inc.
   4  */
   5
   6 #ifndef __LS1012ARDB_H__
   7 #define __LS1012ARDB_H__
   8
   9 #include "ls1012a_common.h"
  10
  11 /* DDR */
  12 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  13 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  14 #define CONFIG_SYS_SDRAM_SIZE           0x20000000
  15 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  16 #define CONFIG_CMD_MEMINFO
  17
  18 #ifndef CONFIG_SPL_BUILD
  19 #undef BOOT_TARGET_DEVICES
  20 #define BOOT_TARGET_DEVICES(func) \
  21         func(USB, usb, 0)
  22 #endif
  23
  24 #undef CONFIG_EXTRA_ENV_SETTINGS
  25 #define CONFIG_EXTRA_ENV_SETTINGS               \
  26         "verify=no\0"                           \
  27         "fdt_high=0xffffffffffffffff\0"         \
  28         "initrd_high=0xffffffffffffffff\0"      \
  29         "fdt_addr=0x00f00000\0"                 \
  30         "kernel_addr=0x01000000\0"              \
  31         "scriptaddr=0x80000000\0"               \
  32         "fdtheader_addr_r=0x80100000\0"         \
  33         "kernelheader_addr_r=0x80200000\0"      \
  34         "kernel_addr_r=0x96000000\0"            \
  35         "fdt_addr_r=0x90000000\0"               \
  36         "load_addr=0x96000000\0"                \
  37         "kernel_size=0x2800000\0"               \
  38         "console=ttyS0,115200\0"                \
  39         BOOTENV                                 \
  40         "boot_scripts=ls1012afrdm_boot.scr\0"   \
  41         "scan_dev_for_boot_part="               \
  42              "part list ${devtype} ${devnum} devplist; "        \
  43              "env exists devplist || setenv devplist 1; "       \
  44              "for distro_bootpart in ${devplist}; do "          \
  45                   "if fstype ${devtype} "                       \
  46                       "${devnum}:${distro_bootpart} "           \
  47                       "bootfstype; then "                       \
  48                       "run scan_dev_for_boot; " \
  49                   "fi; "                        \
  50               "done\0"                          \
  51         "scan_dev_for_boot="                              \
  52                 "echo Scanning ${devtype} "               \
  53                                 "${devnum}:${distro_bootpart}...; "  \
  54                 "for prefix in ${boot_prefixes}; do "     \
  55                         "run scan_dev_for_scripts; "      \
  56                 "done;"                                   \
  57                 "\0"                                      \
  58         "installer=load usb 0:2 $load_addr "    \
  59                    "/flex_installer_arm64.itb; "        \
  60                    "bootm $load_addr#$board\0"  \
  61         "qspi_bootcmd=pfe stop; echo Trying load from qspi..;"  \
  62                 "sf probe && sf read $load_addr "       \
  63                 "$kernel_addr $kernel_size && bootm $load_addr#$board\0"
  64
  65 #undef CONFIG_BOOTCOMMAND
  66 #ifdef CONFIG_TFABOOT
  67 #undef QSPI_NOR_BOOTCOMMAND
  68 #define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
  69 #else
  70 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
  71 #endif
  72
  73 #define CONFIG_CMD_MEMINFO
  74
  75 #endif /* __LS1012ARDB_H__ */