include/configs/ls1012ardb.h

   1 /*
   2  * Copyright 2016 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1012ARDB_H__
   8 #define __LS1012ARDB_H__
   9
  10 #include "ls1012a_common.h"
  11
  12 /* DDR */
  13 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  14 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  15 #define CONFIG_NR_DRAM_BANKS            2
  16 #define CONFIG_SYS_SDRAM_SIZE           0x40000000
  17 #define CONFIG_CMD_MEMINFO
  18 #define CONFIG_CMD_MEMTEST
  19 #define CONFIG_SYS_MEMTEST_START        0x80000000
  20 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
  21
  22 /* DDR board-specific timing parameters */
  23 #define CONFIG_MMDC_MDCTL       0x05180000
  24 #define CONFIG_MMDC_MDPDC       0x00030035
  25 #define CONFIG_MMDC_MDOTC       0x12554000
  26 #define CONFIG_MMDC_MDCFG0      0xbabf7954
  27 #define CONFIG_MMDC_MDCFG1      0xdb328f64
  28 #define CONFIG_MMDC_MDCFG2      0x01ff00db
  29 #define CONFIG_MMDC_MDMISC      0x00001680
  30 #define CONFIG_MMDC_MDREF       0x0f3c8000
  31 #define CONFIG_MMDC_MDRWD       0x00002000
  32 #define CONFIG_MMDC_MDOR        0x00bf1023
  33 #define CONFIG_MMDC_MDASP       0x0000003f
  34 #define CONFIG_MMDC_MPODTCTRL   0x0000022a
  35 #define CONFIG_MMDC_MPZQHWCTRL  0xa1390003
  36
  37 /*
  38 * USB
  39 */
  40 #define CONFIG_HAS_FSL_XHCI_USB
  41
  42 #ifdef CONFIG_HAS_FSL_XHCI_USB
  43 #define CONFIG_USB_XHCI_FSL
  44 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
  45 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
  46 #endif
  47
  48 /*
  49  * I2C IO expander
  50  */
  51
  52 #define I2C_MUX_IO1_ADDR        0x24
  53 #define __SW_BOOT_MASK          0xFC
  54 #define __SW_BOOT_EMU           0x10
  55 #define __SW_BOOT_BANK1         0x00
  56 #define __SW_BOOT_BANK2         0x01
  57 #define __SW_REV_MASK           0x07
  58 #define __SW_REV_A              0xF8
  59 #define __SW_REV_B              0xF0
  60
  61 /*  MMC  */
  62 #define CONFIG_MMC
  63 #ifdef CONFIG_MMC
  64 #define CONFIG_FSL_ESDHC
  65 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
  66 #define CONFIG_GENERIC_MMC
  67 #define CONFIG_DOS_PARTITION
  68 #endif
  69
  70 /* SATA */
  71 #define CONFIG_LIBATA
  72 #define CONFIG_SCSI
  73 #define CONFIG_SCSI_AHCI
  74 #define CONFIG_SCSI_AHCI_PLAT
  75 #define CONFIG_CMD_SCSI
  76 #define CONFIG_DOS_PARTITION
  77 #define CONFIG_BOARD_LATE_INIT
  78
  79 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
  80
  81 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
  82 #define CONFIG_SYS_SCSI_MAX_LUN                 1
  83 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  84                                                 CONFIG_SYS_SCSI_MAX_LUN)
  85 #define CONFIG_PCI              /* Enable PCI/PCIE */
  86 #define CONFIG_PCIE1            /* PCIE controller 1 */
  87 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
  88 #define FSL_PCIE_COMPAT "fsl,ls1043a-pcie"
  89
  90 #define CONFIG_SYS_PCI_64BIT
  91
  92 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
  93 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
  94 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
  95 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
  96
  97 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
  98 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
  99 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 100
 101 #define CONFIG_SYS_PCIE_MEM_BUS         0x08000000
 102 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x04000000
 103 #define CONFIG_SYS_PCIE_MEM_SIZE        0x80000000      /* 128M */
 104
 105 #define CONFIG_NET_MULTI
 106 #define CONFIG_PCI_PNP
 107 #define CONFIG_PCI_SCAN_SHOW
 108 #define CONFIG_CMD_PCI
 109
 110 #define CONFIG_CMD_MEMINFO
 111 #define CONFIG_CMD_MEMTEST
 112 #define CONFIG_SYS_MEMTEST_START        0x80000000
 113 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 114
 115 #endif /* __LS1012ARDB_H__ */