include/configs/ls1088aqds.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright 2017 NXP
   4  */
   5
   6 #ifndef __LS1088A_QDS_H
   7 #define __LS1088A_QDS_H
   8
   9 #include "ls1088a_common.h"
  10
  11
  12 #ifndef __ASSEMBLY__
  13 unsigned long get_board_sys_clk(void);
  14 unsigned long get_board_ddr_clk(void);
  15 #endif
  16
  17
  18 #if defined(CONFIG_QSPI_BOOT)
  19 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  20 #define CONFIG_ENV_SECT_SIZE            0x40000
  21 #elif defined(CONFIG_SD_BOOT)
  22 #define CONFIG_ENV_OFFSET               (3 * 1024 * 1024)
  23 #define CONFIG_SYS_MMC_ENV_DEV          0
  24 #define CONFIG_ENV_SIZE                 0x2000
  25 #else
  26 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
  27 #define CONFIG_ENV_SECT_SIZE            0x20000
  28 #define CONFIG_ENV_SIZE                 0x20000
  29 #endif
  30
  31 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
  32 #define CONFIG_QIXIS_I2C_ACCESS
  33 #define SYS_NO_FLASH
  34
  35 #undef CONFIG_CMD_IMLS
  36 #define CONFIG_SYS_CLK_FREQ             100000000
  37 #define CONFIG_DDR_CLK_FREQ             100000000
  38 #else
  39 #define CONFIG_QIXIS_I2C_ACCESS
  40 #define CONFIG_SYS_I2C_EARLY_INIT
  41 #define CONFIG_SYS_CLK_FREQ             get_board_sys_clk()
  42 #define CONFIG_DDR_CLK_FREQ             get_board_ddr_clk()
  43 #endif
  44
  45 #define COUNTER_FREQUENCY_REAL          (CONFIG_SYS_CLK_FREQ/4)
  46 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  47
  48 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  49
  50 #define CONFIG_DDR_SPD
  51 #define CONFIG_DDR_ECC
  52 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  53 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  54 #define SPD_EEPROM_ADDRESS              0x51
  55 #define CONFIG_SYS_SPD_BUS_NUM          0
  56
  57
  58 /*
  59  * IFC Definitions
  60  */
  61 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  62 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  63 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128*1024*1024)
  64 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64*1024*1024)
  65
  66 #define CONFIG_SYS_NOR0_CSPR                                    \
  67         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  68         CSPR_PORT_SIZE_16                                       | \
  69         CSPR_MSEL_NOR                                           | \
  70         CSPR_V)
  71 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  72         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  73         CSPR_PORT_SIZE_16                                       | \
  74         CSPR_MSEL_NOR                                           | \
  75         CSPR_V)
  76 #define CONFIG_SYS_NOR1_CSPR                                    \
  77         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS)            | \
  78         CSPR_PORT_SIZE_16                                       | \
  79         CSPR_MSEL_NOR                                           | \
  80         CSPR_V)
  81 #define CONFIG_SYS_NOR1_CSPR_EARLY                              \
  82         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH1_BASE_PHYS_EARLY)      | \
  83         CSPR_PORT_SIZE_16                                       | \
  84         CSPR_MSEL_NOR                                           | \
  85         CSPR_V)
  86 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(12)
  87 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
  88                                 FTIM0_NOR_TEADC(0x5) | \
  89                                 FTIM0_NOR_TAVDS(0x6) | \
  90                                 FTIM0_NOR_TEAHC(0x5))
  91 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
  92                                 FTIM1_NOR_TRAD_NOR(0x1a) | \
  93                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
  94 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x8) | \
  95                                 FTIM2_NOR_TCH(0x8) | \
  96                                 FTIM2_NOR_TWPH(0xe) | \
  97                                 FTIM2_NOR_TWP(0x1c))
  98 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  99 #define CONFIG_SYS_IFC_CCR      0x01000000
 100
 101 #ifndef SYS_NO_FLASH
 102 #define CONFIG_FLASH_CFI_DRIVER
 103 #define CONFIG_SYS_FLASH_CFI
 104 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 105 #define CONFIG_SYS_FLASH_QUIET_TEST
 106 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 107
 108 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 109 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 110 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 111 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 112
 113 #define CONFIG_SYS_FLASH_EMPTY_INFO
 114 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE,\
 115                                          CONFIG_SYS_FLASH_BASE + 0x40000000}
 116 #endif
 117 #endif
 118
 119 #define CONFIG_NAND_FSL_IFC
 120 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
 121 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
 122
 123 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 124 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 125                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 126                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 127                                 | CSPR_V)
 128 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 129
 130 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 131                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 132                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 133                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 134                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 135                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 136                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 137
 138 #define CONFIG_SYS_NAND_ONFI_DETECTION
 139
 140 /* ONFI NAND Flash mode0 Timing Params */
 141 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 142                                         FTIM0_NAND_TWP(0x18)   | \
 143                                         FTIM0_NAND_TWCHT(0x07) | \
 144                                         FTIM0_NAND_TWH(0x0a))
 145 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 146                                         FTIM1_NAND_TWBE(0x39)  | \
 147                                         FTIM1_NAND_TRR(0x0e)   | \
 148                                         FTIM1_NAND_TRP(0x18))
 149 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 150                                         FTIM2_NAND_TREH(0x0a) | \
 151                                         FTIM2_NAND_TWHRE(0x1e))
 152 #define CONFIG_SYS_NAND_FTIM3           0x0
 153
 154 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 155 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 156 #define CONFIG_MTD_NAND_VERIFY_WRITE
 157 #define CONFIG_CMD_NAND
 158
 159 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 160
 161 #define CONFIG_FSL_QIXIS
 162 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 163 #define QIXIS_LBMAP_SWITCH              6
 164 #define QIXIS_QMAP_MASK                 0xe0
 165 #define QIXIS_QMAP_SHIFT                5
 166 #define QIXIS_LBMAP_MASK                0x0f
 167 #define QIXIS_LBMAP_SHIFT               0
 168 #define QIXIS_LBMAP_DFLTBANK            0x0e
 169 #define QIXIS_LBMAP_ALTBANK             0x2e
 170 #define QIXIS_LBMAP_SD                  0x00
 171 #define QIXIS_LBMAP_EMMC                0x00
 172 #define QIXIS_LBMAP_IFC                 0x00
 173 #define QIXIS_LBMAP_SD_QSPI             0x0e
 174 #define QIXIS_LBMAP_QSPI                0x0e
 175 #define QIXIS_RCW_SRC_IFC               0x25
 176 #define QIXIS_RCW_SRC_SD                0x40
 177 #define QIXIS_RCW_SRC_EMMC              0x41
 178 #define QIXIS_RCW_SRC_QSPI              0x62
 179 #define QIXIS_RST_CTL_RESET             0x41
 180 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 181 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 182 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 183 #define QIXIS_RST_FORCE_MEM             0x01
 184 #define QIXIS_STAT_PRES1                0xb
 185 #define QIXIS_SDID_MASK                 0x07
 186 #define QIXIS_ESDHC_NO_ADAPTER          0x7
 187
 188 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 189 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 190                                         | CSPR_PORT_SIZE_8 \
 191                                         | CSPR_MSEL_GPCM \
 192                                         | CSPR_V)
 193 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 194                                         | CSPR_PORT_SIZE_8 \
 195                                         | CSPR_MSEL_GPCM \
 196                                         | CSPR_V)
 197
 198 #define SYS_FPGA_AMASK          IFC_AMASK(64 * 1024)
 199 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 200 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 201 #else
 202 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(12)
 203 #endif
 204 /* QIXIS Timing parameters*/
 205 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 206                                         FTIM0_GPCM_TEADC(0x0e) | \
 207                                         FTIM0_GPCM_TEAHC(0x0e))
 208 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 209                                         FTIM1_GPCM_TRAD(0x3f))
 210 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 211                                         FTIM2_GPCM_TCH(0xf) | \
 212                                         FTIM2_GPCM_TWP(0x3E))
 213 #define SYS_FPGA_CS_FTIM3       0x0
 214
 215 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 216 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 217 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 218 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 219 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 220 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 221 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 222 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 223 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 224 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 225 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 226 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 227 #define CONFIG_SYS_AMASK2               SYS_FPGA_AMASK
 228 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 229 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 230 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 231 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 232 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 233 #else
 234 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 235 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 236 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 237 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 238 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 239 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 240 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 241 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 242 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 243 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 244 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR_EARLY
 245 #define CONFIG_SYS_CSPR1_FINAL          CONFIG_SYS_NOR1_CSPR
 246 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK_EARLY
 247 #define CONFIG_SYS_AMASK1_FINAL         CONFIG_SYS_NOR_AMASK
 248 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 249 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 250 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 251 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 252 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 253 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 254 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 255 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 256 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 257 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 258 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 259 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 260 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 261 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 262 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 263 #define CONFIG_SYS_CSPR3_FINAL          SYS_FPGA_CSPR_FINAL
 264 #define CONFIG_SYS_AMASK3               SYS_FPGA_AMASK
 265 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 266 #define CONFIG_SYS_CS3_FTIM0            SYS_FPGA_CS_FTIM0
 267 #define CONFIG_SYS_CS3_FTIM1            SYS_FPGA_CS_FTIM1
 268 #define CONFIG_SYS_CS3_FTIM2            SYS_FPGA_CS_FTIM2
 269 #define CONFIG_SYS_CS3_FTIM3            SYS_FPGA_CS_FTIM3
 270 #endif
 271
 272 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 273
 274 /*
 275  * I2C bus multiplexer
 276  */
 277 #define I2C_MUX_PCA_ADDR_PRI            0x77
 278 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 279 #define I2C_RETIMER_ADDR                0x18
 280 #define I2C_RETIMER_ADDR2               0x19
 281 #define I2C_MUX_CH_DEFAULT              0x8
 282 #define I2C_MUX_CH5                     0xD
 283
 284 #define I2C_MUX_CH_VOL_MONITOR          0xA
 285
 286 /* Voltage monitor on channel 2*/
 287 #define I2C_VOL_MONITOR_ADDR           0x63
 288 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 289 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 290 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 291 #define I2C_SVDD_MONITOR_ADDR           0x4F
 292
 293 #define CONFIG_VID_FLS_ENV              "ls1088aqds_vdd_mv"
 294 #define CONFIG_VID
 295
 296 /* The lowest and highest voltage allowed for LS1088AQDS */
 297 #define VDD_MV_MIN                      819
 298 #define VDD_MV_MAX                      1212
 299
 300 #define CONFIG_VOL_MONITOR_LTC3882_SET
 301 #define CONFIG_VOL_MONITOR_LTC3882_READ
 302
 303 /* PM Bus commands code for LTC3882*/
 304 #define PMBUS_CMD_PAGE                  0x0
 305 #define PMBUS_CMD_READ_VOUT             0x8B
 306 #define PMBUS_CMD_PAGE_PLUS_WRITE       0x05
 307 #define PMBUS_CMD_VOUT_COMMAND          0x21
 308
 309 #define PWM_CHANNEL0                    0x0
 310
 311 /*
 312 * RTC configuration
 313 */
 314 #define RTC
 315 #define CONFIG_RTC_PCF8563 1
 316 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 317 #define CONFIG_CMD_DATE
 318
 319 /* EEPROM */
 320 #define CONFIG_ID_EEPROM
 321 #define CONFIG_SYS_I2C_EEPROM_NXID
 322 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 323 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 324 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 325 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 326 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 327
 328 /* QSPI device */
 329 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 330 #define CONFIG_FSL_QSPI
 331 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 332 #define FSL_QSPI_FLASH_NUM              2
 333
 334 #endif
 335
 336 #ifdef CONFIG_FSL_DSPI
 337 #define CONFIG_SPI_FLASH_STMICRO
 338 #define CONFIG_SPI_FLASH_SST
 339 #define CONFIG_SPI_FLASH_EON
 340 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 341 #define CONFIG_SF_DEFAULT_BUS           1
 342 #define CONFIG_SF_DEFAULT_CS            0
 343 #endif
 344 #endif
 345
 346 #define CONFIG_CMD_MEMINFO
 347 #define CONFIG_SYS_MEMTEST_START        0x80000000
 348 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 349
 350 #ifdef CONFIG_SPL_BUILD
 351 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 352 #else
 353 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 354 #endif
 355
 356 #define CONFIG_FSL_MEMAC
 357
 358 /*  MMC  */
 359 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 360 #define CONFIG_ESDHC_DETECT_QUIRK ((readb(QIXIS_BASE + QIXIS_STAT_PRES1) & \
 361         QIXIS_SDID_MASK) != QIXIS_ESDHC_NO_ADAPTER)
 362
 363 /* Initial environment variables */
 364 #ifdef CONFIG_SECURE_BOOT
 365 #undef CONFIG_EXTRA_ENV_SETTINGS
 366 #define CONFIG_EXTRA_ENV_SETTINGS               \
 367         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 368         "loadaddr=0x90100000\0"                 \
 369         "kernel_addr=0x100000\0"                \
 370         "ramdisk_addr=0x800000\0"               \
 371         "ramdisk_size=0x2000000\0"              \
 372         "fdt_high=0xa0000000\0"                 \
 373         "initrd_high=0xffffffffffffffff\0"      \
 374         "kernel_start=0x1000000\0"              \
 375         "kernel_load=0xa0000000\0"              \
 376         "kernel_size=0x2800000\0"               \
 377         "mcinitcmd=sf probe 0:0;sf read 0xa0a00000 0xa00000 0x100000;"  \
 378         "sf read 0xa0700000 0x700000 0x4000; esbc_validate 0xa0700000;" \
 379         "sf read 0xa0e00000 0xe00000 0x100000;" \
 380         "sf read 0xa0740000 0x740000 0x4000;esbc_validate 0xa0740000;"  \
 381         "fsl_mc start mc 0xa0a00000 0xa0e00000\0"                       \
 382         "mcmemsize=0x70000000 \0"
 383 #else /* if !(CONFIG_SECURE_BOOT) */
 384 #if defined(CONFIG_QSPI_BOOT)
 385 #undef CONFIG_EXTRA_ENV_SETTINGS
 386 #define CONFIG_EXTRA_ENV_SETTINGS               \
 387         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 388         "loadaddr=0x90100000\0"                 \
 389         "kernel_addr=0x100000\0"                \
 390         "ramdisk_addr=0x800000\0"               \
 391         "ramdisk_size=0x2000000\0"              \
 392         "fdt_high=0xa0000000\0"                 \
 393         "initrd_high=0xffffffffffffffff\0"      \
 394         "kernel_start=0x1000000\0"              \
 395         "kernel_load=0xa0000000\0"              \
 396         "kernel_size=0x2800000\0"               \
 397         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 398         "sf read 0x80100000 0xE00000 0x100000;" \
 399         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 400         "mcmemsize=0x70000000 \0"
 401 #elif defined(CONFIG_SD_BOOT)
 402 #undef CONFIG_EXTRA_ENV_SETTINGS
 403 #define CONFIG_EXTRA_ENV_SETTINGS               \
 404         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 405         "loadaddr=0x90100000\0"                 \
 406         "kernel_addr=0x800\0"                \
 407         "ramdisk_addr=0x800000\0"               \
 408         "ramdisk_size=0x2000000\0"              \
 409         "fdt_high=0xa0000000\0"                 \
 410         "initrd_high=0xffffffffffffffff\0"      \
 411         "kernel_start=0x8000\0"              \
 412         "kernel_load=0xa0000000\0"              \
 413         "kernel_size=0x14000\0"               \
 414         "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;"  \
 415         "mmc read 0x80100000 0x7000 0x800;" \
 416         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 417         "mcmemsize=0x70000000 \0"
 418 #else   /* NOR BOOT */
 419 #undef CONFIG_EXTRA_ENV_SETTINGS
 420 #define CONFIG_EXTRA_ENV_SETTINGS               \
 421         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 422         "loadaddr=0x90100000\0"                 \
 423         "kernel_addr=0x100000\0"                \
 424         "ramdisk_addr=0x800000\0"               \
 425         "ramdisk_size=0x2000000\0"              \
 426         "fdt_high=0xa0000000\0"                 \
 427         "initrd_high=0xffffffffffffffff\0"      \
 428         "kernel_start=0x1000000\0"              \
 429         "kernel_load=0xa0000000\0"              \
 430         "kernel_size=0x2800000\0"               \
 431         "mcinitcmd=fsl_mc start mc 0x580A00000 0x580E00000\0"   \
 432         "mcmemsize=0x70000000 \0"
 433 #endif
 434 #endif /* CONFIG_SECURE_BOOT */
 435
 436 #ifdef CONFIG_FSL_MC_ENET
 437 #define CONFIG_FSL_MEMAC
 438 #define CONFIG_PHYLIB
 439 #define CONFIG_PHYLIB_10G
 440 #define CONFIG_PHY_VITESSE
 441 #define CONFIG_PHY_REALTEK
 442 #define CONFIG_PHY_TERANETICS
 443 #define RGMII_PHY1_ADDR         0x1
 444 #define RGMII_PHY2_ADDR         0x2
 445 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 446 #define SGMII_CARD_PORT2_PHY_ADDR 0x1d
 447 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 448 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
 449
 450 #define XQSGMII_CARD_PHY1_PORT0_ADDR 0x0
 451 #define XQSGMII_CARD_PHY1_PORT1_ADDR 0x1
 452 #define XQSGMII_CARD_PHY1_PORT2_ADDR 0x2
 453 #define XQSGMII_CARD_PHY1_PORT3_ADDR 0x3
 454 #define XQSGMII_CARD_PHY2_PORT0_ADDR 0x4
 455 #define XQSGMII_CARD_PHY2_PORT1_ADDR 0x5
 456 #define XQSGMII_CARD_PHY2_PORT2_ADDR 0x6
 457 #define XQSGMII_CARD_PHY2_PORT3_ADDR 0x7
 458 #define XQSGMII_CARD_PHY3_PORT0_ADDR 0x8
 459 #define XQSGMII_CARD_PHY3_PORT1_ADDR 0x9
 460 #define XQSGMII_CARD_PHY3_PORT2_ADDR 0xa
 461 #define XQSGMII_CARD_PHY3_PORT3_ADDR 0xb
 462 #define XQSGMII_CARD_PHY4_PORT0_ADDR 0xc
 463 #define XQSGMII_CARD_PHY4_PORT1_ADDR 0xd
 464 #define XQSGMII_CARD_PHY4_PORT2_ADDR 0xe
 465 #define XQSGMII_CARD_PHY4_PORT3_ADDR 0xf
 466
 467 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 468 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 469
 470 #endif
 471
 472 #define BOOT_TARGET_DEVICES(func) \
 473         func(USB, usb, 0) \
 474         func(MMC, mmc, 0) \
 475         func(SCSI, scsi, 0) \
 476         func(DHCP, dhcp, na)
 477 #include <config_distro_bootcmd.h>
 478
 479 #include <asm/fsl_secure_boot.h>
 480
 481 #endif /* __LS1088A_QDS_H */