include/configs/ls1088ardb.h

   1 /*
   2  * Copyright 2017 NXP
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1088A_RDB_H
   8 #define __LS1088A_RDB_H
   9
  10 #include "ls1088a_common.h"
  11
  12 #define CONFIG_DISPLAY_BOARDINFO_LATE
  13
  14 #if defined(CONFIG_QSPI_BOOT)
  15 #define CONFIG_ENV_IS_IN_SPI_FLASH
  16 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  17 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
  18 #define CONFIG_ENV_SECT_SIZE            0x40000
  19 #else
  20 #define CONFIG_ENV_IS_IN_FLASH
  21 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
  22 #define CONFIG_ENV_SECT_SIZE            0x20000
  23 #define CONFIG_ENV_SIZE                 0x20000
  24 #endif
  25
  26 #if defined(CONFIG_QSPI_BOOT)
  27 #define CONFIG_QIXIS_I2C_ACCESS
  28 #define SYS_NO_FLASH
  29 #undef CONFIG_CMD_IMLS
  30 #endif
  31
  32 #define CONFIG_SYS_CLK_FREQ             100000000
  33 #define CONFIG_DDR_CLK_FREQ             100000000
  34 #define COUNTER_FREQUENCY_REAL          25000000        /* 25MHz */
  35 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  36
  37 #define CONFIG_DDR_SPD
  38 #ifdef CONFIG_EMU
  39 #define CONFIG_SYS_FSL_DDR_EMU
  40 #define CONFIG_SYS_MXC_I2C1_SPEED       40000000
  41 #define CONFIG_SYS_MXC_I2C2_SPEED       40000000
  42 #else
  43 #define CONFIG_DDR_ECC
  44 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  45 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  46 #endif
  47 #define SPD_EEPROM_ADDRESS      0x51
  48 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  49 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  50
  51
  52 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  53 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  54 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
  55 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64 * 1024 * 1024)
  56
  57 #define CONFIG_SYS_NOR0_CSPR                                    \
  58         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  59         CSPR_PORT_SIZE_16                                       | \
  60         CSPR_MSEL_NOR                                           | \
  61         CSPR_V)
  62 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  63         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  64         CSPR_PORT_SIZE_16                                       | \
  65         CSPR_MSEL_NOR                                           | \
  66         CSPR_V)
  67 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(6)
  68 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x1) | \
  69                                 FTIM0_NOR_TEADC(0x1) | \
  70                                 FTIM0_NOR_TEAHC(0x1))
  71 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1) | \
  72                                 FTIM1_NOR_TRAD_NOR(0x1))
  73 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x0) | \
  74                                 FTIM2_NOR_TCH(0x0) | \
  75                                 FTIM2_NOR_TWP(0x1))
  76 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  77 #define CONFIG_SYS_IFC_CCR      0x01000000
  78
  79 #ifndef SYS_NO_FLASH
  80 #define CONFIG_FLASH_CFI_DRIVER
  81 #define CONFIG_SYS_FLASH_CFI
  82 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  83 #define CONFIG_SYS_FLASH_QUIET_TEST
  84 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  85
  86 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
  87 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  88 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  89 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
  90
  91 #define CONFIG_SYS_FLASH_EMPTY_INFO
  92 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  93 #endif
  94 #endif
  95 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  96 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  97
  98 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  99 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 100                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 101                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 102                                 | CSPR_V)
 103 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 104
 105 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 106                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 107                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 108                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 109                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 110                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 111                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 112
 113 #define CONFIG_SYS_NAND_ONFI_DETECTION
 114
 115 /* ONFI NAND Flash mode0 Timing Params */
 116 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 117                                         FTIM0_NAND_TWP(0x18)   | \
 118                                         FTIM0_NAND_TWCHT(0x07) | \
 119                                         FTIM0_NAND_TWH(0x0a))
 120 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 121                                         FTIM1_NAND_TWBE(0x39)  | \
 122                                         FTIM1_NAND_TRR(0x0e)   | \
 123                                         FTIM1_NAND_TRP(0x18))
 124 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 125                                         FTIM2_NAND_TREH(0x0a) | \
 126                                         FTIM2_NAND_TWHRE(0x1e))
 127 #define CONFIG_SYS_NAND_FTIM3           0x0
 128
 129 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 130 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 131 #define CONFIG_MTD_NAND_VERIFY_WRITE
 132
 133 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 134
 135 #define CONFIG_FSL_QIXIS
 136 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 137 #define QIXIS_LBMAP_SWITCH              2
 138 #define QIXIS_QMAP_MASK                 0xe0
 139 #define QIXIS_QMAP_SHIFT                5
 140 #define QIXIS_LBMAP_MASK                0x1f
 141 #define QIXIS_LBMAP_SHIFT               5
 142 #define QIXIS_LBMAP_DFLTBANK            0x00
 143 #define QIXIS_LBMAP_ALTBANK             0x20
 144 #define QIXIS_LBMAP_SD                  0x00
 145 #define QIXIS_LBMAP_SD_QSPI             0x00
 146 #define QIXIS_LBMAP_QSPI                0x00
 147 #define QIXIS_RCW_SRC_SD                0x40
 148 #define QIXIS_RCW_SRC_QSPI              0x62
 149 #define QIXIS_RST_CTL_RESET             0x31
 150 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 151 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 152 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 153 #define QIXIS_RST_FORCE_MEM             0x01
 154
 155 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 156 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 157                                         | CSPR_PORT_SIZE_8 \
 158                                         | CSPR_MSEL_GPCM \
 159                                         | CSPR_V)
 160 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 161                                         | CSPR_PORT_SIZE_8 \
 162                                         | CSPR_MSEL_GPCM \
 163                                         | CSPR_V)
 164
 165 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64*1024)
 166 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 167 /* QIXIS Timing parameters*/
 168 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 169                                         FTIM0_GPCM_TEADC(0x0e) | \
 170                                         FTIM0_GPCM_TEAHC(0x0e))
 171 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 172                                         FTIM1_GPCM_TRAD(0x3f))
 173 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 174                                         FTIM2_GPCM_TCH(0xf) | \
 175                                         FTIM2_GPCM_TWP(0x3E))
 176 #define SYS_FPGA_CS_FTIM3       0x0
 177
 178 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 179 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 180 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 181 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 182 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 183 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 184 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 185 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 186 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 187 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 188 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 189 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 190 #define CONFIG_SYS_AMASK2               CONFIG_SYS_FPGA_AMASK
 191 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 192 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 193 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 194 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 195 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 196 #else
 197 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 198 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 199 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 200 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 201 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 202 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 203 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 204 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 205 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 206 #endif
 207
 208
 209 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 210
 211 /*
 212  * I2C bus multiplexer
 213  */
 214 #define I2C_MUX_PCA_ADDR_PRI            0x77
 215 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 216 #define I2C_RETIMER_ADDR                0x18
 217 #define I2C_MUX_CH_DEFAULT              0x8
 218 #define I2C_MUX_CH5                     0xD
 219 /*
 220 * RTC configuration
 221 */
 222 #define RTC
 223 #define CONFIG_RTC_PCF8563 1
 224 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 225 #define CONFIG_CMD_DATE
 226
 227 /* EEPROM */
 228 #define CONFIG_ID_EEPROM
 229 #define CONFIG_SYS_I2C_EEPROM_NXID
 230 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 231 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 232 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 233 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 234 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 235
 236 /* QSPI device */
 237 #if defined(CONFIG_QSPI_BOOT)
 238 #define CONFIG_FSL_QSPI
 239 #define CONFIG_SPI_FLASH_SPANSION
 240 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 241 #define FSL_QSPI_FLASH_NUM              2
 242 #endif
 243
 244 #define CONFIG_CMD_MEMINFO
 245 #define CONFIG_CMD_MEMTEST
 246 #define CONFIG_SYS_MEMTEST_START        0x80000000
 247 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 248
 249 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 250
 251 #define CONFIG_FSL_MEMAC
 252
 253 /* Initial environment variables */
 254 #if defined(CONFIG_QSPI_BOOT)
 255 #undef CONFIG_EXTRA_ENV_SETTINGS
 256 #define CONFIG_EXTRA_ENV_SETTINGS               \
 257         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 258         "loadaddr=0x90100000\0"                 \
 259         "kernel_addr=0x100000\0"                \
 260         "ramdisk_addr=0x800000\0"               \
 261         "ramdisk_size=0x2000000\0"              \
 262         "fdt_high=0xa0000000\0"                 \
 263         "initrd_high=0xffffffffffffffff\0"      \
 264         "kernel_start=0x1000000\0"              \
 265         "kernel_load=0xa0000000\0"              \
 266         "kernel_size=0x2800000\0"               \
 267         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 268         "sf read 0x80100000 0xE00000 0x100000;" \
 269         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 270         "mcmemsize=0x70000000 \0"
 271
 272 #endif
 273
 274 /* MAC/PHY configuration */
 275 #ifdef CONFIG_FSL_MC_ENET
 276 #define CONFIG_PHYLIB_10G
 277 #define CONFIG_PHY_GIGE
 278 #define CONFIG_PHYLIB
 279
 280 #define CONFIG_PHY_VITESSE
 281 #define CONFIG_PHY_AQUANTIA
 282 #define AQ_PHY_ADDR1                    0x00
 283 #define AQR105_IRQ_MASK                 0x00000004
 284
 285 #define QSGMII1_PORT1_PHY_ADDR          0x0c
 286 #define QSGMII1_PORT2_PHY_ADDR          0x0d
 287 #define QSGMII1_PORT3_PHY_ADDR          0x0e
 288 #define QSGMII1_PORT4_PHY_ADDR          0x0f
 289 #define QSGMII2_PORT1_PHY_ADDR          0x1c
 290 #define QSGMII2_PORT2_PHY_ADDR          0x1d
 291 #define QSGMII2_PORT3_PHY_ADDR          0x1e
 292 #define QSGMII2_PORT4_PHY_ADDR          0x1f
 293
 294 #define CONFIG_MII
 295 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 296 #define CONFIG_PHY_GIGE
 297 #endif
 298
 299 /*  MMC  */
 300 #ifdef CONFIG_MMC
 301 #define CONFIG_FSL_ESDHC
 302 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 303 #endif
 304
 305 #undef CONFIG_CMDLINE_EDITING
 306 #include <config_distro_defaults.h>
 307
 308 #define BOOT_TARGET_DEVICES(func) \
 309         func(USB, usb, 0) \
 310         func(MMC, mmc, 0) \
 311         func(SCSI, scsi, 0) \
 312         func(DHCP, dhcp, na)
 313 #include <config_distro_bootcmd.h>
 314
 315 #include <asm/fsl_secure_boot.h>
 316
 317 #endif /* __LS1088A_RDB_H */