include/configs/ls1088ardb.h

   1 /*
   2  * Copyright 2017 NXP
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1088A_RDB_H
   8 #define __LS1088A_RDB_H
   9
  10 #include "ls1088a_common.h"
  11
  12 #define CONFIG_DISPLAY_BOARDINFO_LATE
  13
  14 #if defined(CONFIG_QSPI_BOOT)
  15 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  16 #define CONFIG_ENV_OFFSET               0x300000        /* 3MB */
  17 #define CONFIG_ENV_SECT_SIZE            0x40000
  18 #else
  19 #define CONFIG_ENV_IS_IN_FLASH
  20 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x300000)
  21 #define CONFIG_ENV_SECT_SIZE            0x20000
  22 #define CONFIG_ENV_SIZE                 0x20000
  23 #endif
  24
  25 #if defined(CONFIG_QSPI_BOOT)
  26 #define CONFIG_QIXIS_I2C_ACCESS
  27 #define SYS_NO_FLASH
  28 #endif
  29
  30 #define CONFIG_SYS_CLK_FREQ             100000000
  31 #define CONFIG_DDR_CLK_FREQ             100000000
  32 #define COUNTER_FREQUENCY_REAL          25000000        /* 25MHz */
  33 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  34
  35 #define CONFIG_DDR_SPD
  36 #ifdef CONFIG_EMU
  37 #define CONFIG_SYS_FSL_DDR_EMU
  38 #define CONFIG_SYS_MXC_I2C1_SPEED       40000000
  39 #define CONFIG_SYS_MXC_I2C2_SPEED       40000000
  40 #else
  41 #define CONFIG_DDR_ECC
  42 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  43 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  44 #endif
  45 #define SPD_EEPROM_ADDRESS      0x51
  46 #define CONFIG_SYS_SPD_BUS_NUM  0       /* SPD on I2C bus 0 */
  47 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  48
  49
  50 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  51 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
  52 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
  53 #define CONFIG_SYS_NOR_AMASK_EARLY      IFC_AMASK(64 * 1024 * 1024)
  54
  55 #define CONFIG_SYS_NOR0_CSPR                                    \
  56         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS)             | \
  57         CSPR_PORT_SIZE_16                                       | \
  58         CSPR_MSEL_NOR                                           | \
  59         CSPR_V)
  60 #define CONFIG_SYS_NOR0_CSPR_EARLY                              \
  61         (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS_EARLY)       | \
  62         CSPR_PORT_SIZE_16                                       | \
  63         CSPR_MSEL_NOR                                           | \
  64         CSPR_V)
  65 #define CONFIG_SYS_NOR_CSOR     CSOR_NOR_ADM_SHIFT(6)
  66 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x1) | \
  67                                 FTIM0_NOR_TEADC(0x1) | \
  68                                 FTIM0_NOR_TEAHC(0x1))
  69 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x1) | \
  70                                 FTIM1_NOR_TRAD_NOR(0x1))
  71 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x0) | \
  72                                 FTIM2_NOR_TCH(0x0) | \
  73                                 FTIM2_NOR_TWP(0x1))
  74 #define CONFIG_SYS_NOR_FTIM3    0x04000000
  75 #define CONFIG_SYS_IFC_CCR      0x01000000
  76
  77 #ifndef SYS_NO_FLASH
  78 #define CONFIG_FLASH_CFI_DRIVER
  79 #define CONFIG_SYS_FLASH_CFI
  80 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  81 #define CONFIG_SYS_FLASH_QUIET_TEST
  82 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
  83
  84 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
  85 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
  86 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
  87 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
  88
  89 #define CONFIG_SYS_FLASH_EMPTY_INFO
  90 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  91 #endif
  92 #endif
  93 #define CONFIG_SYS_NAND_MAX_ECCPOS      256
  94 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  95
  96 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
  97 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
  98                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
  99                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 100                                 | CSPR_V)
 101 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64 * 1024)
 102
 103 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 104                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 105                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 106                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 107                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 108                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 109                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 110
 111 #define CONFIG_SYS_NAND_ONFI_DETECTION
 112
 113 /* ONFI NAND Flash mode0 Timing Params */
 114 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 115                                         FTIM0_NAND_TWP(0x18)   | \
 116                                         FTIM0_NAND_TWCHT(0x07) | \
 117                                         FTIM0_NAND_TWH(0x0a))
 118 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 119                                         FTIM1_NAND_TWBE(0x39)  | \
 120                                         FTIM1_NAND_TRR(0x0e)   | \
 121                                         FTIM1_NAND_TRP(0x18))
 122 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 123                                         FTIM2_NAND_TREH(0x0a) | \
 124                                         FTIM2_NAND_TWHRE(0x1e))
 125 #define CONFIG_SYS_NAND_FTIM3           0x0
 126
 127 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 128 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 129 #define CONFIG_MTD_NAND_VERIFY_WRITE
 130
 131 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 132
 133 #define CONFIG_FSL_QIXIS
 134 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 135 #define QIXIS_LBMAP_SWITCH              2
 136 #define QIXIS_QMAP_MASK                 0xe0
 137 #define QIXIS_QMAP_SHIFT                5
 138 #define QIXIS_LBMAP_MASK                0x1f
 139 #define QIXIS_LBMAP_SHIFT               5
 140 #define QIXIS_LBMAP_DFLTBANK            0x00
 141 #define QIXIS_LBMAP_ALTBANK             0x20
 142 #define QIXIS_LBMAP_SD                  0x00
 143 #define QIXIS_LBMAP_SD_QSPI             0x00
 144 #define QIXIS_LBMAP_QSPI                0x00
 145 #define QIXIS_RCW_SRC_SD                0x40
 146 #define QIXIS_RCW_SRC_QSPI              0x62
 147 #define QIXIS_RST_CTL_RESET             0x31
 148 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 149 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 150 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 151 #define QIXIS_RST_FORCE_MEM             0x01
 152
 153 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 154 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS_EARLY) \
 155                                         | CSPR_PORT_SIZE_8 \
 156                                         | CSPR_MSEL_GPCM \
 157                                         | CSPR_V)
 158 #define SYS_FPGA_CSPR_FINAL     (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 159                                         | CSPR_PORT_SIZE_8 \
 160                                         | CSPR_MSEL_GPCM \
 161                                         | CSPR_V)
 162
 163 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64*1024)
 164 #define CONFIG_SYS_FPGA_CSOR            CSOR_GPCM_ADM_SHIFT(0)
 165 /* QIXIS Timing parameters*/
 166 #define SYS_FPGA_CS_FTIM0       (FTIM0_GPCM_TACSE(0x0e) | \
 167                                         FTIM0_GPCM_TEADC(0x0e) | \
 168                                         FTIM0_GPCM_TEAHC(0x0e))
 169 #define SYS_FPGA_CS_FTIM1       (FTIM1_GPCM_TACO(0xff) | \
 170                                         FTIM1_GPCM_TRAD(0x3f))
 171 #define SYS_FPGA_CS_FTIM2       (FTIM2_GPCM_TCS(0xf) | \
 172                                         FTIM2_GPCM_TCH(0xf) | \
 173                                         FTIM2_GPCM_TWP(0x3E))
 174 #define SYS_FPGA_CS_FTIM3       0x0
 175
 176 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 177 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 178 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 179 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 180 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 181 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 182 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 183 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 184 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 185 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 186 #define CONFIG_SYS_CSPR2                CONFIG_SYS_FPGA_CSPR
 187 #define CONFIG_SYS_CSPR2_FINAL          SYS_FPGA_CSPR_FINAL
 188 #define CONFIG_SYS_AMASK2               CONFIG_SYS_FPGA_AMASK
 189 #define CONFIG_SYS_CSOR2                CONFIG_SYS_FPGA_CSOR
 190 #define CONFIG_SYS_CS2_FTIM0            SYS_FPGA_CS_FTIM0
 191 #define CONFIG_SYS_CS2_FTIM1            SYS_FPGA_CS_FTIM1
 192 #define CONFIG_SYS_CS2_FTIM2            SYS_FPGA_CS_FTIM2
 193 #define CONFIG_SYS_CS2_FTIM3            SYS_FPGA_CS_FTIM3
 194 #else
 195 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 196 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR_EARLY
 197 #define CONFIG_SYS_CSPR0_FINAL          CONFIG_SYS_NOR0_CSPR
 198 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 199 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 200 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 201 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 202 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 203 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 204 #endif
 205
 206
 207 #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000
 208
 209 /*
 210  * I2C bus multiplexer
 211  */
 212 #define I2C_MUX_PCA_ADDR_PRI            0x77
 213 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 214 #define I2C_RETIMER_ADDR                0x18
 215 #define I2C_MUX_CH_DEFAULT              0x8
 216 #define I2C_MUX_CH5                     0xD
 217 /*
 218 * RTC configuration
 219 */
 220 #define RTC
 221 #define CONFIG_RTC_PCF8563 1
 222 #define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
 223 #define CONFIG_CMD_DATE
 224
 225 /* EEPROM */
 226 #define CONFIG_ID_EEPROM
 227 #define CONFIG_SYS_I2C_EEPROM_NXID
 228 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 229 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 230 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 232 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 233
 234 /* QSPI device */
 235 #if defined(CONFIG_QSPI_BOOT)
 236 #define CONFIG_FSL_QSPI
 237 #define CONFIG_SPI_FLASH_SPANSION
 238 #define FSL_QSPI_FLASH_SIZE             (1 << 26)
 239 #define FSL_QSPI_FLASH_NUM              2
 240 #endif
 241
 242 #define CONFIG_CMD_MEMINFO
 243 #define CONFIG_CMD_MEMTEST
 244 #define CONFIG_SYS_MEMTEST_START        0x80000000
 245 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 246
 247 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 248
 249 #define CONFIG_FSL_MEMAC
 250
 251 /* Initial environment variables */
 252 #if defined(CONFIG_QSPI_BOOT)
 253 #undef CONFIG_EXTRA_ENV_SETTINGS
 254 #define CONFIG_EXTRA_ENV_SETTINGS               \
 255         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 256         "loadaddr=0x90100000\0"                 \
 257         "kernel_addr=0x100000\0"                \
 258         "ramdisk_addr=0x800000\0"               \
 259         "ramdisk_size=0x2000000\0"              \
 260         "fdt_high=0xa0000000\0"                 \
 261         "initrd_high=0xffffffffffffffff\0"      \
 262         "kernel_start=0x1000000\0"              \
 263         "kernel_load=0xa0000000\0"              \
 264         "kernel_size=0x2800000\0"               \
 265         "mcinitcmd=sf probe 0:0;sf read 0x80000000 0xA00000 0x100000;"  \
 266         "sf read 0x80100000 0xE00000 0x100000;" \
 267         "fsl_mc start mc 0x80000000 0x80100000\0"       \
 268         "mcmemsize=0x70000000 \0"
 269
 270 #endif
 271
 272 /* MAC/PHY configuration */
 273 #ifdef CONFIG_FSL_MC_ENET
 274 #define CONFIG_PHYLIB_10G
 275 #define CONFIG_PHY_GIGE
 276 #define CONFIG_PHYLIB
 277
 278 #define CONFIG_PHY_VITESSE
 279 #define CONFIG_PHY_AQUANTIA
 280 #define AQ_PHY_ADDR1                    0x00
 281 #define AQR105_IRQ_MASK                 0x00000004
 282
 283 #define QSGMII1_PORT1_PHY_ADDR          0x0c
 284 #define QSGMII1_PORT2_PHY_ADDR          0x0d
 285 #define QSGMII1_PORT3_PHY_ADDR          0x0e
 286 #define QSGMII1_PORT4_PHY_ADDR          0x0f
 287 #define QSGMII2_PORT1_PHY_ADDR          0x1c
 288 #define QSGMII2_PORT2_PHY_ADDR          0x1d
 289 #define QSGMII2_PORT3_PHY_ADDR          0x1e
 290 #define QSGMII2_PORT4_PHY_ADDR          0x1f
 291
 292 #define CONFIG_MII
 293 #define CONFIG_ETHPRIME         "DPMAC1@xgmii"
 294 #define CONFIG_PHY_GIGE
 295 #endif
 296
 297 /*  MMC  */
 298 #ifdef CONFIG_MMC
 299 #define CONFIG_FSL_ESDHC
 300 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 301 #endif
 302
 303 #undef CONFIG_CMDLINE_EDITING
 304 #include <config_distro_defaults.h>
 305
 306 #define BOOT_TARGET_DEVICES(func) \
 307         func(USB, usb, 0) \
 308         func(MMC, mmc, 0) \
 309         func(SCSI, scsi, 0) \
 310         func(DHCP, dhcp, na)
 311 #include <config_distro_bootcmd.h>
 312
 313 #include <asm/fsl_secure_boot.h>
 314
 315 #endif /* __LS1088A_RDB_H */