include/configs/ls2080a_common.h

   1 /*
   2  * Copyright (C) 2014 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS2_COMMON_H
   8 #define __LS2_COMMON_H
   9
  10 #define CONFIG_REMAKE_ELF
  11 #define CONFIG_FSL_LAYERSCAPE
  12 #define CONFIG_MP
  13 #define CONFIG_GICV3
  14 #define CONFIG_FSL_TZPC_BP147
  15
  16 #include <asm/arch/ls2080a_stream_id.h>
  17 #include <asm/arch/config.h>
  18 #if (defined(CONFIG_SYS_FSL_SRDS_1) || defined(CONFIG_SYS_FSL_SRDS_2))
  19 #define CONFIG_SYS_HAS_SERDES
  20 #endif
  21
  22 /* Link Definitions */
  23 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  24
  25 /* We need architecture specific misc initializations */
  26 #define CONFIG_ARCH_MISC_INIT
  27
  28 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  29
  30 /* Link Definitions */
  31 #ifndef CONFIG_QSPI_BOOT
  32 #ifdef CONFIG_SPL
  33 #define CONFIG_SYS_TEXT_BASE            0x80400000
  34 #else
  35 #define CONFIG_SYS_TEXT_BASE            0x30100000
  36 #endif
  37 #endif
  38
  39 #ifdef CONFIG_EMU
  40 #define CONFIG_SYS_NO_FLASH
  41 #endif
  42
  43 #define CONFIG_SUPPORT_RAW_INITRD
  44
  45 #define CONFIG_SKIP_LOWLEVEL_INIT
  46 #define CONFIG_BOARD_EARLY_INIT_F       1
  47
  48 #ifndef CONFIG_SPL
  49 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  50 #endif
  51 #ifndef CONFIG_SYS_FSL_DDR4
  52 #define CONFIG_SYS_FSL_DDR3             /* Use DDR3 memory */
  53 #define CONFIG_SYS_DDR_RAW_TIMING
  54 #endif
  55
  56 #define CONFIG_SYS_FSL_DDR_INTLV_256B   /* force 256 byte interleaving */
  57
  58 #define CONFIG_VERY_BIG_RAM
  59 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000UL
  60 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  61 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  62 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x8080000000ULL
  63 #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS       2
  64
  65 /*
  66  * SMP Definitinos
  67  */
  68 #define CPU_RELEASE_ADDR                secondary_boot_func
  69
  70 #define CONFIG_SYS_FSL_OTHER_DDR_NUM_CTRLS
  71 #ifdef CONFIG_SYS_FSL_HAS_DP_DDR
  72 #define CONFIG_SYS_DP_DDR_BASE          0x6000000000ULL
  73 /*
  74  * DDR controller use 0 as the base address for binding.
  75  * It is mapped to CONFIG_SYS_DP_DDR_BASE for core to access.
  76  */
  77 #define CONFIG_SYS_DP_DDR_BASE_PHY      0
  78 #define CONFIG_DP_DDR_CTRL              2
  79 #define CONFIG_DP_DDR_NUM_CTRLS         1
  80 #endif
  81
  82 /* Generic Timer Definitions */
  83 /*
  84  * This is not an accurate number. It is used in start.S. The frequency
  85  * will be udpated later when get_bus_freq(0) is available.
  86  */
  87 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  88
  89 /* Size of malloc() pool */
  90 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2048 * 1024)
  91
  92 /* I2C */
  93 #define CONFIG_SYS_I2C
  94 #define CONFIG_SYS_I2C_MXC
  95 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  96 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  97 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  98 #define CONFIG_SYS_I2C_MXC_I2C4         /* enable I2C bus 4 */
  99
 100 /* Serial Port */
 101 #define CONFIG_CONS_INDEX       1
 102 #define CONFIG_SYS_NS16550_SERIAL
 103 #define CONFIG_SYS_NS16550_REG_SIZE     1
 104 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 105
 106 #define CONFIG_BAUDRATE                 115200
 107 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 108
 109 /* IFC */
 110 #define CONFIG_FSL_IFC
 111
 112 /*
 113  * During booting, IFC is mapped at the region of 0x30000000.
 114  * But this region is limited to 256MB. To accommodate NOR, promjet
 115  * and FPGA. This region is divided as below:
 116  * 0x30000000 - 0x37ffffff : 128MB : NOR flash
 117  * 0x38000000 - 0x3BFFFFFF : 64MB  : Promjet
 118  * 0x3C000000 - 0x40000000 : 64MB  : FPGA etc
 119  *
 120  * To accommodate bigger NOR flash and other devices, we will map IFC
 121  * chip selects to as below:
 122  * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
 123  * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
 124  * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
 125  * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
 126  * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
 127  *
 128  * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
 129  * CONFIG_SYS_FLASH_BASE has the final address (core view)
 130  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
 131  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
 132  * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
 133  */
 134
 135 #define CONFIG_SYS_FLASH_BASE                   0x580000000ULL
 136 #define CONFIG_SYS_FLASH_BASE_PHYS              0x80000000
 137 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
 138
 139 #define CONFIG_SYS_FLASH1_BASE_PHYS             0xC0000000
 140 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY       0x8000000
 141
 142 #ifndef __ASSEMBLY__
 143 unsigned long long get_qixis_addr(void);
 144 #endif
 145 #define QIXIS_BASE                              get_qixis_addr()
 146 #define QIXIS_BASE_PHYS                         0x20000000
 147 #define QIXIS_BASE_PHYS_EARLY                   0xC000000
 148 #define QIXIS_STAT_PRES1                        0xb
 149 #define QIXIS_SDID_MASK                         0x07
 150 #define QIXIS_ESDHC_NO_ADAPTER                  0x7
 151
 152 #define CONFIG_SYS_NAND_BASE                    0x530000000ULL
 153 #define CONFIG_SYS_NAND_BASE_PHYS               0x30000000
 154
 155 /* MC firmware */
 156 #define CONFIG_FSL_MC_ENET
 157 /* TODO Actual DPL max length needs to be confirmed with the MC FW team */
 158 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH     0x20000
 159 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET    0x00F00000
 160 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH     0x20000
 161 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET    0x00F20000
 162 /* For LS2085A */
 163 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH    0x200000
 164 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET   0x07000000
 165
 166 /*
 167  * Carve out a DDR region which will not be used by u-boot/Linux
 168  *
 169  * It will be used by MC and Debug Server. The MC region must be
 170  * 512MB aligned, so the min size to hide is 512MB.
 171  */
 172 #ifdef CONFIG_FSL_MC_ENET
 173 #define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE            (512UL * 1024 * 1024)
 174 #define CONFIG_SYS_MC_RSV_MEM_ALIGN                     (512UL * 1024 * 1024)
 175 #endif
 176
 177 /* PCIe */
 178 #define CONFIG_PCIE1            /* PCIE controller 1 */
 179 #define CONFIG_PCIE2            /* PCIE controller 2 */
 180 #define CONFIG_PCIE3            /* PCIE controller 3 */
 181 #define CONFIG_PCIE4            /* PCIE controller 4 */
 182 #define CONFIG_PCIE_LAYERSCAPE  /* Use common FSL Layerscape PCIe code */
 183 #ifdef CONFIG_LS2080A
 184 #define FSL_PCIE_COMPAT "fsl,ls2080a-pcie"
 185 #endif
 186
 187 #define CONFIG_SYS_PCI_64BIT
 188
 189 #define CONFIG_SYS_PCIE_CFG0_PHYS_OFF   0x00000000
 190 #define CONFIG_SYS_PCIE_CFG0_SIZE       0x00001000      /* 4k */
 191 #define CONFIG_SYS_PCIE_CFG1_PHYS_OFF   0x00001000
 192 #define CONFIG_SYS_PCIE_CFG1_SIZE       0x00001000      /* 4k */
 193
 194 #define CONFIG_SYS_PCIE_IO_BUS          0x00000000
 195 #define CONFIG_SYS_PCIE_IO_PHYS_OFF     0x00010000
 196 #define CONFIG_SYS_PCIE_IO_SIZE         0x00010000      /* 64k */
 197
 198 #define CONFIG_SYS_PCIE_MEM_BUS         0x40000000
 199 #define CONFIG_SYS_PCIE_MEM_PHYS_OFF    0x40000000
 200 #define CONFIG_SYS_PCIE_MEM_SIZE        0x40000000      /* 1G */
 201
 202 /* Command line configuration */
 203 #define CONFIG_CMD_ENV
 204
 205 /* Miscellaneous configurable options */
 206 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 207 #define CONFIG_ARCH_EARLY_INIT_R
 208
 209 /* Physical Memory Map */
 210 /* fixme: these need to be checked against the board */
 211 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
 212
 213 #define CONFIG_NR_DRAM_BANKS            3
 214
 215 #define CONFIG_HWCONFIG
 216 #define HWCONFIG_BUFFER_SIZE            128
 217
 218 #define CONFIG_DISPLAY_CPUINFO
 219
 220 /* Allow to overwrite serial and ethaddr */
 221 #define CONFIG_ENV_OVERWRITE
 222
 223 /* Initial environment variables */
 224 #define CONFIG_EXTRA_ENV_SETTINGS               \
 225         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 226         "loadaddr=0x80100000\0"                 \
 227         "kernel_addr=0x100000\0"                \
 228         "ramdisk_addr=0x800000\0"               \
 229         "ramdisk_size=0x2000000\0"              \
 230         "fdt_high=0xa0000000\0"                 \
 231         "initrd_high=0xffffffffffffffff\0"      \
 232         "kernel_start=0x581200000\0"            \
 233         "kernel_load=0xa0000000\0"              \
 234         "kernel_size=0x2800000\0"               \
 235         "console=ttyAMA0,38400n8\0"             \
 236         "mcinitcmd=fsl_mc start mc 0x580300000" \
 237         " 0x580800000 \0"
 238
 239 #define CONFIG_BOOTARGS         "console=ttyS0,115200 root=/dev/ram0 " \
 240                                 "earlycon=uart8250,mmio,0x21c0500 " \
 241                                 "ramdisk_size=0x2000000 default_hugepagesz=2m" \
 242                                 " hugepagesz=2m hugepages=256"
 243 #define CONFIG_BOOTCOMMAND      "fsl_mc apply dpl 0x580700000 &&" \
 244                                 " cp.b $kernel_start $kernel_load" \
 245                                 " $kernel_size && bootm $kernel_load"
 246
 247 /* Monitor Command Prompt */
 248 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 249 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 250                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 251 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 252 #define CONFIG_SYS_LONGHELP
 253 #define CONFIG_CMDLINE_EDITING          1
 254 #define CONFIG_AUTO_COMPLETE
 255 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 256
 257 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 258
 259 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 260 #define CONFIG_SPL_BSS_MAX_SIZE         0x00100000
 261 #define CONFIG_SPL_FRAMEWORK
 262 #define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
 263 #define CONFIG_SPL_MAX_SIZE             0x16000
 264 #define CONFIG_SPL_STACK                (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
 265 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 266 #define CONFIG_SPL_TEXT_BASE            0x1800a000
 267
 268 #define CONFIG_SYS_NAND_U_BOOT_DST      0x80400000
 269 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 270 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x00100000
 271 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
 272 #define CONFIG_SYS_MONITOR_LEN          (640 * 1024)
 273
 274 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 275
 276 /* Hash command with SHA acceleration supported in hardware */
 277 #ifdef CONFIG_FSL_CAAM
 278 #define CONFIG_CMD_HASH
 279 #define CONFIG_SHA_HW_ACCEL
 280 #endif
 281
 282 #endif /* __LS2_COMMON_H */