include/configs/lwmon.h

   1 /*
   2  * (C) Copyright 2001-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 /*
  25  * board/config.h - configuration options, board specific
  26  */
  27
  28 #ifndef __CONFIG_H
  29 #define __CONFIG_H
  30
  31 /* External logbuffer support */
  32 #define CONFIG_LOGBUFFER
  33
  34 /*
  35  * High Level Configuration Options
  36  * (easy to change)
  37  */
  38
  39 #define CONFIG_MPC823           1       /* This is a MPC823E CPU        */
  40 #define CONFIG_LWMON            1       /* ...on a LWMON board          */
  41
  42 /* Default Ethernet MAC address */
  43 #define CONFIG_ETHADDR          00:11:B0:00:00:00
  44
  45 /* The default Ethernet MAC address can be overwritten just once */
  46 #ifdef CONFIG_ETHADDR
  47 #define CONFIG_OVERWRITE_ETHADDR_ONCE   1
  48 #endif
  49
  50 #define CONFIG_BOARD_EARLY_INIT_F 1     /* Call board_early_init_f      */
  51 #define CONFIG_BOARD_POSTCLK_INIT 1     /* Call board_postclk_init      */
  52
  53 #define CONFIG_LCD              1       /* use LCD controller ...       */
  54 #define CONFIG_HLD1045          1       /* ... with a HLD1045 display   */
  55
  56 #define CONFIG_LCD_LOGO         1       /* print our logo on the LCD    */
  57 #define CONFIG_LCD_INFO         1       /* ... and some board info      */
  58 #define CONFIG_SPLASH_SCREEN            /* ... with splashscreen support*/
  59
  60 #define CONFIG_SERIAL_MULTI     1
  61 #define CONFIG_8xx_CONS_SMC2    1       /* Console is on SMC2           */
  62 #define CONFIG_8xx_CONS_SCC2    1       /* Console is on SCC2           */
  63
  64 #define CONFIG_BAUDRATE         115200  /* with watchdog >= 38400 needed */
  65
  66 #define CONFIG_BOOTDELAY        1       /* autoboot after 1 second      */
  67
  68 #define CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
  69
  70 /* pre-boot commands */
  71 #define CONFIG_PREBOOT          "setenv bootdelay 15"
  72
  73 #undef  CONFIG_BOOTARGS
  74
  75 /* POST support */
  76 #define CONFIG_POST             (CFG_POST_CACHE    | \
  77                                  CFG_POST_WATCHDOG | \
  78                                  CFG_POST_RTC      | \
  79                                  CFG_POST_MEMORY   | \
  80                                  CFG_POST_CPU      | \
  81                                  CFG_POST_UART     | \
  82                                  CFG_POST_ETHER    | \
  83                                  CFG_POST_I2C      | \
  84                                  CFG_POST_SPI      | \
  85                                  CFG_POST_USB      | \
  86                                  CFG_POST_SPR      | \
  87                                  CFG_POST_SYSMON)
  88
  89 /*
  90  * Keyboard commands:
  91  * # = 0x28 = ENTER :           enable bootmessages on LCD
  92  * 2 = 0x3A+0x3C = F1 + F3 :    enable update mode
  93  * 3 = 0x3C+0x3F = F3 + F6 :    enable test mode
  94  */
  95
  96 #define CONFIG_BOOTCOMMAND "autoscr 40040000;saveenv"
  97
  98 /*      "gatewayip=10.8.211.250\0"                                      \ */
  99 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 100         "kernel_addr=40080000\0"                                        \
 101         "ramdisk_addr=40280000\0"                                       \
 102         "netmask=255.255.192.0\0"                                       \
 103         "serverip=10.8.2.101\0"                                         \
 104         "ipaddr=10.8.57.0\0"                                            \
 105         "magic_keys=#23\0"                                              \
 106         "key_magic#=28\0"                                               \
 107         "key_cmd#=setenv addfb setenv 'bootargs $bootargs console=tty0'\0" \
 108         "key_magic2=3A+3C\0"                                            \
 109         "key_cmd2=echo *** Entering Update Mode ***;"                   \
 110                 "if fatload ide 0:3 10000 update.scr;"                  \
 111                         "then autoscr 10000;"                           \
 112                         "else echo *** UPDATE FAILED ***;"              \
 113                 "fi\0"                                                  \
 114         "key_magic3=3C+3F\0"                                            \
 115         "key_cmd3=echo *** Entering Test Mode ***;"                     \
 116                 "setenv add_misc 'setenv bootargs $bootargs testmode'\0" \
 117         "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath\0" \
 118         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 119         "addfb=setenv bootargs $bootargs console=ttyS1,$baudrate\0"     \
 120         "addip=setenv bootargs $bootargs "                              \
 121                 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
 122                 "panic=1\0"                                             \
 123         "add_wdt=setenv bootargs $bootargs $wdt_args\0"                 \
 124         "add_misc=setenv bootargs $bootargs runmode\0"                  \
 125         "flash_nfs=run nfsargs addip add_wdt addfb add_misc;"           \
 126                 "bootm $kernel_addr\0"                                  \
 127         "flash_self=run ramargs addip add_wdt addfb add_misc;"          \
 128                 "bootm $kernel_addr $ramdisk_addr\0"                    \
 129         "net_nfs=tftp 100000 /tftpboot/uImage.lwmon;"                   \
 130                 "run nfsargs addip add_wdt addfb;bootm\0"               \
 131         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
 132         "load=tftp 100000 /tftpboot/u-boot.bin\0"                       \
 133         "update=protect off 1:0;era 1:0;cp.b 100000 40000000 $filesize\0" \
 134         "wdt_args=wdt_8xx=off\0"                                        \
 135         "verify=no"
 136
 137 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
 138 #undef  CFG_LOADS_BAUD_CHANGE           /* don't allow baudrate change  */
 139
 140 #define CONFIG_WATCHDOG         1       /* watchdog enabled             */
 141 #define CFG_WATCHDOG_FREQ       (CFG_HZ / 20)
 142
 143 #undef  CONFIG_STATUS_LED               /* Status LED disabled          */
 144
 145 /* enable I2C and select the hardware/software driver */
 146 #undef  CONFIG_HARD_I2C                 /* I2C with hardware support    */
 147 #define CONFIG_SOFT_I2C         1       /* I2C bit-banged               */
 148
 149 #define CFG_I2C_SPEED           93000   /* 93 kHz is supposed to work   */
 150 #define CFG_I2C_SLAVE           0xFE
 151
 152 #ifdef CONFIG_SOFT_I2C
 153 /*
 154  * Software (bit-bang) I2C driver configuration
 155  */
 156 #define PB_SCL          0x00000020      /* PB 26 */
 157 #define PB_SDA          0x00000010      /* PB 27 */
 158
 159 #define I2C_INIT        (immr->im_cpm.cp_pbdir |=  PB_SCL)
 160 #define I2C_ACTIVE      (immr->im_cpm.cp_pbdir |=  PB_SDA)
 161 #define I2C_TRISTATE    (immr->im_cpm.cp_pbdir &= ~PB_SDA)
 162 #define I2C_READ        ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 163 #define I2C_SDA(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 164                         else    immr->im_cpm.cp_pbdat &= ~PB_SDA
 165 #define I2C_SCL(bit)    if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 166                         else    immr->im_cpm.cp_pbdat &= ~PB_SCL
 167 #define I2C_DELAY       udelay(2)       /* 1/4 I2C clock duration */
 168 #endif  /* CONFIG_SOFT_I2C */
 169
 170
 171 #define CONFIG_RTC_PCF8563              /* use Philips PCF8563 RTC      */
 172
 173
 174 /*
 175  * Command line configuration.
 176  */
 177 #include <config_cmd_default.h>
 178
 179 #define CONFIG_CMD_ASKENV
 180 #define CONFIG_CMD_BMP
 181 #define CONFIG_CMD_BSP
 182 #define CONFIG_CMD_DATE
 183 #define CONFIG_CMD_DHCP
 184 #define CONFIG_CMD_EEPROM
 185 #define CONFIG_CMD_FAT
 186 #define CONFIG_CMD_I2C
 187 #define CONFIG_CMD_IDE
 188 #define CONFIG_CMD_NFS
 189 #define CONFIG_CMD_SNTP
 190
 191 #ifdef CONFIG_POST
 192 #define CONFIG_CMD_DIAG
 193 #endif
 194
 195
 196 #define CONFIG_MAC_PARTITION
 197 #define CONFIG_DOS_PARTITION
 198
 199 /*
 200  * BOOTP options
 201  */
 202 #define CONFIG_BOOTP_SUBNETMASK
 203 #define CONFIG_BOOTP_GATEWAY
 204 #define CONFIG_BOOTP_HOSTNAME
 205 #define CONFIG_BOOTP_BOOTPATH
 206 #define CONFIG_BOOTP_BOOTFILESIZE
 207
 208
 209 /*
 210  * Miscellaneous configurable options
 211  */
 212 #define CFG_LONGHELP                    /* undef to save memory         */
 213 #define CFG_PROMPT      "=> "           /* Monitor Command Prompt       */
 214
 215 #define CFG_HUSH_PARSER         1       /* use "hush" command parser    */
 216 #ifdef  CFG_HUSH_PARSER
 217 #define CFG_PROMPT_HUSH_PS2     "> "
 218 #endif
 219
 220 #if defined(CONFIG_CMD_KGDB)
 221 #define CFG_CBSIZE      1024            /* Console I/O Buffer Size      */
 222 #else
 223 #define CFG_CBSIZE      256             /* Console I/O Buffer Size      */
 224 #endif
 225 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 226 #define CFG_MAXARGS     16              /* max number of command args   */
 227 #define CFG_BARGSIZE    CFG_CBSIZE      /* Boot Argument Buffer Size    */
 228
 229 #define CFG_MEMTEST_START       0x00100000      /* memtest works on     */
 230 #define CFG_MEMTEST_END         0x00F00000      /* 1 ... 15MB in DRAM   */
 231
 232 #define CFG_LOAD_ADDR           0x00100000      /* default load address */
 233
 234 #define CFG_PIO_MODE            0       /* IDE interface in PIO Mode 0  */
 235
 236 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 237
 238 /*
 239  * When the watchdog is enabled, output must be fast enough in Linux.
 240  */
 241 #ifdef CONFIG_WATCHDOG
 242 #define CFG_BAUDRATE_TABLE      {               38400, 57600, 115200 }
 243 #else
 244 #define CFG_BAUDRATE_TABLE      {  9600, 19200, 38400, 57600, 115200 }
 245 #endif
 246
 247 /*----------------------------------------------------------------------*/
 248 #define CONFIG_MODEM_SUPPORT    1       /* enable modem initialization stuff */
 249 #undef CONFIG_MODEM_SUPPORT_DEBUG
 250
 251 #define CONFIG_MODEM_KEY_MAGIC  "3C+3D" /* press F3 + F4 keys to enable modem */
 252 #define CONFIG_POST_KEY_MAGIC   "3C+3E" /* press F3 + F5 keys to force POST */
 253 #if 0
 254 #define CONFIG_AUTOBOOT_KEYED           /* Enable "password" protection */
 255 #define CONFIG_AUTOBOOT_PROMPT  \
 256         "\nEnter password - autoboot in %d sec...\n", bootdelay
 257 #define CONFIG_AUTOBOOT_DELAY_STR       "  "    /* "password"   */
 258 #endif
 259 /*----------------------------------------------------------------------*/
 260
 261 /*
 262  * Low Level Configuration Settings
 263  * (address mappings, register initial values, etc.)
 264  * You should know what you are doing if you make changes here.
 265  */
 266 /*-----------------------------------------------------------------------
 267  * Internal Memory Mapped Register
 268  */
 269 #define CFG_IMMR                0xFFF00000
 270
 271 /*-----------------------------------------------------------------------
 272  * Definitions for initial stack pointer and data area (in DPRAM)
 273  */
 274 #define CFG_INIT_RAM_ADDR       CFG_IMMR
 275 #define CFG_INIT_RAM_END        0x2F00  /* End of used area in DPRAM    */
 276 #define CFG_GBL_DATA_SIZE       68  /* size in bytes reserved for initial data */
 277 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 278 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 279
 280 /*-----------------------------------------------------------------------
 281  * Start addresses for the final memory configuration
 282  * (Set up by the startup code)
 283  * Please note that CFG_SDRAM_BASE _must_ start at 0
 284  */
 285 #define CFG_SDRAM_BASE          0x00000000
 286 #define CFG_FLASH_BASE          0x40000000
 287 #if defined(DEBUG) || defined(CONFIG_CMD_IDE)
 288 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 289 #else
 290 #define CFG_MONITOR_LEN         (128 << 10)     /* Reserve 128 kB for Monitor   */
 291 #endif
 292 #define CFG_MONITOR_BASE        CFG_FLASH_BASE
 293 #define CFG_MALLOC_LEN          (128 << 10)     /* Reserve 128 kB for malloc()  */
 294
 295 /*
 296  * For booting Linux, the board info and command line data
 297  * have to be in the first 8 MB of memory, since this is
 298  * the maximum mapped by the Linux kernel during initialization.
 299  */
 300 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 301 /*-----------------------------------------------------------------------
 302  * FLASH organization
 303  */
 304 #define CFG_MAX_FLASH_BANKS     2       /* max number of memory banks           */
 305 #define CFG_MAX_FLASH_SECT      128     /* max number of sectors on one chip    */
 306
 307 #define CFG_FLASH_ERASE_TOUT    180000  /* Timeout for Flash Erase (in ms)      */
 308 #define CFG_FLASH_WRITE_TOUT    600     /* Timeout for Flash Write (in ms)      */
 309 #define CFG_FLASH_USE_BUFFER_WRITE
 310 #define CFG_FLASH_BUFFER_WRITE_TOUT     2048    /* Timeout for Flash Buffer Write (in ms)       */
 311 /* Buffer size.
 312    We have two flash devices connected in parallel.
 313    Each device incorporates a Write Buffer of 32 bytes.
 314  */
 315 #define CFG_FLASH_BUFFER_SIZE   (2*32)
 316
 317 /* Put environment in flash which is much faster to boot than using the EEPROM  */
 318 #define CFG_ENV_IS_IN_FLASH     1
 319 #define CFG_ENV_ADDR        0x40040000  /* Address    of Environment Sector     */
 320 #define CFG_ENV_SIZE            0x2000  /* Total Size of Environment            */
 321 #define CFG_ENV_SECT_SIZE       0x40000 /* we have BIG sectors only :-(         */
 322
 323 /*-----------------------------------------------------------------------
 324  * I2C/EEPROM Configuration
 325  */
 326
 327 #define CFG_I2C_AUDIO_ADDR      0x28    /* Audio volume control                 */
 328 #define CFG_I2C_SYSMON_ADDR     0x2E    /* LM87 System Monitor                  */
 329 #define CFG_I2C_RTC_ADDR        0x51    /* PCF8563 RTC                          */
 330 #define CFG_I2C_POWER_A_ADDR    0x52    /* PCMCIA/USB power switch, channel A   */
 331 #define CFG_I2C_POWER_B_ADDR    0x53    /* PCMCIA/USB power switch, channel B   */
 332 #define CFG_I2C_KEYBD_ADDR      0x56    /* PIC LWE keyboard                     */
 333 #define CFG_I2C_PICIO_ADDR      0x57    /* PIC IO Expander                      */
 334
 335 #undef  CONFIG_USE_FRAM                 /* Use FRAM instead of EEPROM   */
 336
 337 #ifdef CONFIG_USE_FRAM  /* use FRAM */
 338 #define CFG_I2C_EEPROM_ADDR     0x55    /* FRAM FM24CL64                */
 339 #define CFG_I2C_EEPROM_ADDR_LEN 2
 340 #else                   /* use EEPROM */
 341 #define CFG_I2C_EEPROM_ADDR     0x58    /* EEPROM AT24C164              */
 342 #define CFG_I2C_EEPROM_ADDR_LEN 1
 343 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS  10      /* takes up to 10 msec  */
 344 #endif  /* CONFIG_USE_FRAM */
 345 #define CFG_EEPROM_PAGE_WRITE_BITS      4
 346
 347 /* List of I2C addresses to be verified by POST */
 348 #ifdef CONFIG_USE_FRAM
 349 #define I2C_ADDR_LIST   {  /*   CFG_I2C_AUDIO_ADDR, */  \
 350                                 CFG_I2C_SYSMON_ADDR,    \
 351                                 CFG_I2C_RTC_ADDR,       \
 352                                 CFG_I2C_POWER_A_ADDR,   \
 353                                 CFG_I2C_POWER_B_ADDR,   \
 354                                 CFG_I2C_KEYBD_ADDR,     \
 355                                 CFG_I2C_PICIO_ADDR,     \
 356                                 CFG_I2C_EEPROM_ADDR,    \
 357                         }
 358 #else   /* Use EEPROM - which show up on 8 consequtive addresses */
 359 #define I2C_ADDR_LIST   {  /*   CFG_I2C_AUDIO_ADDR, */  \
 360                                 CFG_I2C_SYSMON_ADDR,    \
 361                                 CFG_I2C_RTC_ADDR,       \
 362                                 CFG_I2C_POWER_A_ADDR,   \
 363                                 CFG_I2C_POWER_B_ADDR,   \
 364                                 CFG_I2C_KEYBD_ADDR,     \
 365                                 CFG_I2C_PICIO_ADDR,     \
 366                                 CFG_I2C_EEPROM_ADDR+0,  \
 367                                 CFG_I2C_EEPROM_ADDR+1,  \
 368                                 CFG_I2C_EEPROM_ADDR+2,  \
 369                                 CFG_I2C_EEPROM_ADDR+3,  \
 370                                 CFG_I2C_EEPROM_ADDR+4,  \
 371                                 CFG_I2C_EEPROM_ADDR+5,  \
 372                                 CFG_I2C_EEPROM_ADDR+6,  \
 373                                 CFG_I2C_EEPROM_ADDR+7,  \
 374                         }
 375 #endif  /* CONFIG_USE_FRAM */
 376
 377 /*-----------------------------------------------------------------------
 378  * Cache Configuration
 379  */
 380 #define CFG_CACHELINE_SIZE      16      /* For all MPC8xx CPUs                  */
 381 #if defined(CONFIG_CMD_KGDB)
 382 #define CFG_CACHELINE_SHIFT     4       /* log base 2 of the above value        */
 383 #endif
 384
 385 /*-----------------------------------------------------------------------
 386  * SYPCR - System Protection Control                            11-9
 387  * SYPCR can only be written once after reset!
 388  *-----------------------------------------------------------------------
 389  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 390  */
 391 #if 0 && defined(CONFIG_WATCHDOG)       /* LWMON uses external MAX706TESA WD */
 392 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 393                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 394 #else
 395 #define CFG_SYPCR       (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 396 #endif
 397
 398 /*-----------------------------------------------------------------------
 399  * SIUMCR - SIU Module Configuration                            11-6
 400  *-----------------------------------------------------------------------
 401  * PCMCIA config., multi-function pin tri-state
 402  */
 403 /* EARB, DBGC and DBPC are initialised by the HCW */
 404 /* => 0x000000C0 */
 405 #define CFG_SIUMCR      (SIUMCR_GB5E)
 406 /*#define CFG_SIUMCR    (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) */
 407
 408 /*-----------------------------------------------------------------------
 409  * TBSCR - Time Base Status and Control                         11-26
 410  *-----------------------------------------------------------------------
 411  * Clear Reference Interrupt Status, Timebase freezing enabled
 412  */
 413 #define CFG_TBSCR       (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 414
 415 /*-----------------------------------------------------------------------
 416  * PISCR - Periodic Interrupt Status and Control                11-31
 417  *-----------------------------------------------------------------------
 418  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 419  */
 420 #define CFG_PISCR       (PISCR_PS | PISCR_PITF)
 421
 422 /*-----------------------------------------------------------------------
 423  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 424  *-----------------------------------------------------------------------
 425  * Reset PLL lock status sticky bit, timer expired status bit and timer
 426  * interrupt status bit, set PLL multiplication factor !
 427  */
 428 /* 0x00405000 */
 429 #define CFG_PLPRCR_MF   4       /* (4+1) * 13.2 = 66 MHz Clock */
 430 #define CFG_PLPRCR                                                      \
 431                 (       (CFG_PLPRCR_MF << PLPRCR_MF_SHIFT) |            \
 432                         PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST |    \
 433                         /*PLPRCR_CSRC|*/ PLPRCR_LPM_NORMAL |            \
 434                         PLPRCR_CSR    /*| PLPRCR_LOLRE|PLPRCR_FIOPD*/   \
 435                 )
 436
 437 #define CONFIG_8xx_GCLK_FREQ    ((CFG_PLPRCR_MF+1)*13200000)
 438
 439 /*-----------------------------------------------------------------------
 440  * SCCR - System Clock and reset Control Register               15-27
 441  *-----------------------------------------------------------------------
 442  * Set clock output, timebase and RTC source and divider,
 443  * power management and some other internal clocks
 444  */
 445 #define SCCR_MASK       SCCR_EBDF11
 446 /* 0x01800000 */
 447 #define CFG_SCCR        (SCCR_COM00     | /*SCCR_TBS|*/         \
 448                          SCCR_RTDIV     |   SCCR_RTSEL    |     \
 449                          /*SCCR_CRQEN|*/  /*SCCR_PRQEN|*/       \
 450                          SCCR_EBDF00 |   SCCR_DFSYNC00 |        \
 451                          SCCR_DFBRG00   |   SCCR_DFNL000  |     \
 452                          SCCR_DFNH000   |   SCCR_DFLCD100 |     \
 453                          SCCR_DFALCD01)
 454
 455 /*-----------------------------------------------------------------------
 456  * RTCSC - Real-Time Clock Status and Control Register          11-27
 457  *-----------------------------------------------------------------------
 458  */
 459 /* 0x00C3 => 0x0003 */
 460 #define CFG_RTCSC       (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 461
 462
 463 /*-----------------------------------------------------------------------
 464  * RCCR - RISC Controller Configuration Register                19-4
 465  *-----------------------------------------------------------------------
 466  */
 467 #define CFG_RCCR 0x0000
 468
 469 /*-----------------------------------------------------------------------
 470  * RMDS - RISC Microcode Development Support Control Register
 471  *-----------------------------------------------------------------------
 472  */
 473 #define CFG_RMDS 0
 474
 475 /*-----------------------------------------------------------------------
 476  *
 477  * Interrupt Levels
 478  *-----------------------------------------------------------------------
 479  */
 480 #define CFG_CPM_INTERRUPT       13      /* SIU_LEVEL6   */
 481
 482 /*-----------------------------------------------------------------------
 483  * PCMCIA stuff
 484  *-----------------------------------------------------------------------
 485  *
 486  */
 487 #define CFG_PCMCIA_MEM_ADDR     (0x50000000)
 488 #define CFG_PCMCIA_MEM_SIZE     ( 64 << 20 )
 489 #define CFG_PCMCIA_DMA_ADDR     (0x54000000)
 490 #define CFG_PCMCIA_DMA_SIZE     ( 64 << 20 )
 491 #define CFG_PCMCIA_ATTRB_ADDR   (0x58000000)
 492 #define CFG_PCMCIA_ATTRB_SIZE   ( 64 << 20 )
 493 #define CFG_PCMCIA_IO_ADDR      (0x5C000000)
 494 #define CFG_PCMCIA_IO_SIZE      ( 64 << 20 )
 495
 496 /*-----------------------------------------------------------------------
 497  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 498  *-----------------------------------------------------------------------
 499  */
 500
 501 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 502
 503 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 504 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 505 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 506
 507 #define CFG_IDE_MAXBUS          1       /* max. 1 IDE bus               */
 508 #define CFG_IDE_MAXDEVICE       1       /* max. 1 drive per IDE bus     */
 509
 510 #define CFG_ATA_IDE0_OFFSET     0x0000
 511
 512 #define CFG_ATA_BASE_ADDR       CFG_PCMCIA_MEM_ADDR
 513
 514 /* Offset for data I/O                  */
 515 #define CFG_ATA_DATA_OFFSET     (CFG_PCMCIA_MEM_SIZE + 0x320)
 516
 517 /* Offset for normal register accesses  */
 518 #define CFG_ATA_REG_OFFSET      (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
 519
 520 /* Offset for alternate registers       */
 521 #define CFG_ATA_ALT_OFFSET      0x0100
 522
 523 #define CONFIG_SUPPORT_VFAT             /* enable VFAT support */
 524
 525 /*-----------------------------------------------------------------------
 526  *
 527  *-----------------------------------------------------------------------
 528  *
 529  */
 530 #define CFG_DER 0
 531
 532 /*
 533  * Init Memory Controller:
 534  *
 535  * BR0/1 and OR0/1 (FLASH) - second Flash bank optional
 536  */
 537
 538 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 539 #define FLASH_BASE1_PRELIM      0x41000000      /* FLASH bank #1        */
 540
 541 /* used to re-map FLASH:
 542  * restrict access enough to keep SRAM working (if any)
 543  * but not too much to meddle with FLASH accesses
 544  */
 545 #define CFG_REMAP_OR_AM         0xFF000000      /* OR addr mask */
 546 #define CFG_PRELIM_OR_AM        0xFF000000      /* OR addr mask */
 547
 548 /* FLASH timing: ACS = 00, TRLX = 0, CSNT = 1, SCY = 8, EHTR = 0        */
 549 #define CFG_OR_TIMING_FLASH     (OR_SCY_8_CLK)
 550
 551 #define CFG_OR0_REMAP   ( CFG_REMAP_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 552                                 CFG_OR_TIMING_FLASH)
 553 #define CFG_OR0_PRELIM  (CFG_PRELIM_OR_AM | OR_ACS_DIV1 | OR_BI | \
 554                                 CFG_OR_TIMING_FLASH)
 555 /* 16 bit, bank valid */
 556 #define CFG_BR0_PRELIM  ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
 557
 558 #define CFG_OR1_REMAP   CFG_OR0_REMAP
 559 #define CFG_OR1_PRELIM  CFG_OR0_PRELIM
 560 #define CFG_BR1_PRELIM  ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_PS_32 | BR_V )
 561
 562 /*
 563  * BR3/OR3: SDRAM
 564  *
 565  * Multiplexed addresses, GPL5 output to GPL5_A (don't care)
 566  */
 567 #define SDRAM_BASE3_PRELIM      0x00000000      /* SDRAM bank */
 568 #define SDRAM_PRELIM_OR_AM      0xF0000000      /* map 256 MB (>SDRAM_MAX_SIZE!) */
 569 #define SDRAM_TIMING            OR_SCY_0_CLK    /* SDRAM-Timing */
 570
 571 #define SDRAM_MAX_SIZE          0x08000000      /* max 128 MB SDRAM */
 572
 573 #define CFG_OR3_PRELIM  (SDRAM_PRELIM_OR_AM | OR_CSNT_SAM | OR_G5LS | SDRAM_TIMING )
 574 #define CFG_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 575
 576 /*
 577  * BR5/OR5: Touch Panel
 578  *
 579  * AM=0xFFC00 ATM=0 CSNT/SAM=0 ACS/G5LA/G5LS=3 BIH=1 SCY=0 SETA=0 TRLX=0 EHTR=0
 580  */
 581 #define TOUCHPNL_BASE           0x20000000
 582 #define TOUCHPNL_OR_AM          0xFFFF8000
 583 #define TOUCHPNL_TIMING         OR_SCY_0_CLK
 584
 585 #define CFG_OR5_PRELIM  (TOUCHPNL_OR_AM | OR_CSNT_SAM | OR_ACS_DIV1 | OR_BI | \
 586                          TOUCHPNL_TIMING )
 587 #define CFG_BR5_PRELIM  ((TOUCHPNL_BASE & BR_BA_MSK) | BR_PS_32 | BR_V )
 588
 589 #define CFG_MEMORY_75
 590 #undef  CFG_MEMORY_7E
 591 #undef  CFG_MEMORY_8E
 592
 593 /*
 594  * Memory Periodic Timer Prescaler
 595  */
 596
 597 /* periodic timer for refresh */
 598 #define CFG_MPTPR       0x200
 599
 600 /*
 601  * MAMR settings for SDRAM
 602  */
 603
 604 #define CFG_MAMR_8COL   0x80802114
 605 #define CFG_MAMR_9COL   0x80904114
 606
 607 /*
 608  * MAR setting for SDRAM
 609  */
 610 #define CFG_MAR         0x00000088
 611
 612 /*
 613  * Internal Definitions
 614  *
 615  * Boot Flags
 616  */
 617 #define BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
 618 #define BOOTFLAG_WARM   0x02            /* Software reboot                      */
 619
 620 #endif  /* __CONFIG_H */