]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/lwmon5.h
projects / people / ms / u-boot.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
lwmon5: disable CONFIG_ZERO_BOOTDELAY
[people/ms/u-boot.git] / include / configs / lwmon5.h
1 /*
2 * (C) Copyright 2007-2008
3 * Stefan Roese, DENX Software Engineering, sr@denx.de.
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 */
20
21 /************************************************************************
22 * lwmon5.h - configuration for lwmon5 board
23 ***********************************************************************/
24 #ifndef __CONFIG_H
25 #define __CONFIG_H
26
27 /*-----------------------------------------------------------------------
28 * High Level Configuration Options
29 *----------------------------------------------------------------------*/
30 #define CONFIG_LWMON5 1 /* Board is lwmon5 */
31 #define CONFIG_440EPX 1 /* Specific PPC440EPx */
32 #define CONFIG_440 1 /* ... PPC440 family */
33 #define CONFIG_4xx 1 /* ... PPC4xx family */
34 #define CONFIG_SYS_CLK_FREQ 33300000 /* external freq to pll */
35
36 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
37 #define CONFIG_BOARD_POSTCLK_INIT 1 /* Call board_postclk_init */
38 #define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
39 #define CONFIG_BOARD_RESET 1 /* Call board_reset */
40
41 /*-----------------------------------------------------------------------
42 * Base addresses -- Note these are effective addresses where the
43 * actual resources get mapped (not physical addresses)
44 *----------------------------------------------------------------------*/
45 #define CFG_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
46 #define CFG_MALLOC_LEN (512 * 1024) /* Reserve 512 kB for malloc() */
47
48 #define CFG_BOOT_BASE_ADDR 0xf0000000
49 #define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */
50 #define CFG_FLASH_BASE 0xf8000000 /* start of FLASH */
51 #define CFG_MONITOR_BASE TEXT_BASE
52 #define CFG_LIME_BASE_0 0xc0000000
53 #define CFG_LIME_BASE_1 0xc1000000
54 #define CFG_LIME_BASE_2 0xc2000000
55 #define CFG_LIME_BASE_3 0xc3000000
56 #define CFG_FPGA_BASE_0 0xc4000000
57 #define CFG_FPGA_BASE_1 0xc4200000
58 #define CFG_OCM_BASE 0xe0010000 /* ocm */
59 #define CFG_PCI_BASE 0xe0000000 /* Internal PCI regs */
60 #define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */
61 #define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000
62 #define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000
63 #define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000
64
65 /* Don't change either of these */
66 #define CFG_PERIPHERAL_BASE 0xef600000 /* internal peripherals */
67
68 #define CFG_USB2D0_BASE 0xe0000100
69 #define CFG_USB_DEVICE 0xe0000000
70 #define CFG_USB_HOST 0xe0000400
71
72 /*-----------------------------------------------------------------------
73 * Initial RAM & stack pointer
74 *----------------------------------------------------------------------*/
75 /*
76 * On LWMON5 we use D-cache as init-ram and stack pointer. We also move
77 * the POST_WORD from OCM to a 440EPx register that preserves it's
78 * content during reset (GPT0_COM6). This way we reserve the OCM (16k)
79 * for logbuffer only.
80 */
81 #define CFG_INIT_RAM_DCACHE 1 /* d-cache as init ram */
82 #define CFG_INIT_RAM_ADDR 0x70000000 /* DCache */
83 #define CFG_INIT_RAM_END (4 << 10)
84 #define CFG_GBL_DATA_SIZE 256 /* num bytes initial data*/
85 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
86 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
87 #define CFG_POST_ALT_WORD_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP6)
88 /* unused GPT0 COMP reg */
89 #define CFG_MEM_TOP_HIDE (4 << 10) /* don't use last 4kbytes */
90 /* 440EPx errata CHIP 11 */
91
92 /* Additional registers for watchdog timer post test */
93
94 #define CFG_DSPIC_TEST_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
95 #define CFG_WATCHDOG_TIME_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP4)
96 #define CFG_WATCHDOG_FLAGS_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP5)
97 #define CFG_WATCHDOG_MAGIC 0x12480000
98 #define CFG_WATCHDOG_MAGIC_MASK 0xFFFF0000
99 #define CFG_DSPIC_TEST_MASK 0x00000001
100
101 /*-----------------------------------------------------------------------
102 * Serial Port
103 *----------------------------------------------------------------------*/
104 #undef CFG_EXT_SERIAL_CLOCK /* no external clock provided */
105 #define CONFIG_BAUDRATE 115200
106 #define CONFIG_SERIAL_MULTI 1
107 /* define this if you want console on UART1 */
108 #define CONFIG_UART1_CONSOLE 1 /* use UART1 as console */
109
110 #define CFG_BAUDRATE_TABLE \
111 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
112
113 /*-----------------------------------------------------------------------
114 * Environment
115 *----------------------------------------------------------------------*/
116 #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
117
118 /*-----------------------------------------------------------------------
119 * FLASH related
120 *----------------------------------------------------------------------*/
121 #define CFG_FLASH_CFI /* The flash is CFI compatible */
122 #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
123
124 #define CFG_FLASH0 0xFC000000
125 #define CFG_FLASH1 0xF8000000
126 #define CFG_FLASH_BANKS_LIST { CFG_FLASH1, CFG_FLASH0 }
127
128 #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
129 #define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
130
131 #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
132 #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
133
134 #define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
135 #define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */
136
137 #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
138 #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */
139
140 #define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */
141 #define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
142 #define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
143
144 /* Address and size of Redundant Environment Sector */
145 #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
146 #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
147
148 /*-----------------------------------------------------------------------
149 * DDR SDRAM
150 *----------------------------------------------------------------------*/
151 #define CFG_MBYTES_SDRAM (256) /* 256MB */
152 #define CFG_DDR_CACHED_ADDR 0x40000000 /* setup 2nd TLB cached here */
153 #define CONFIG_DDR_DATA_EYE 1 /* use DDR2 optimization */
154 #define CONFIG_DDR_ECC 1 /* enable ECC */
155 #define CFG_POST_ECC_ON CFG_POST_ECC
156
157 /* POST support */
158 #define CONFIG_POST (CFG_POST_CACHE | \
159 CFG_POST_CPU | \
160 CFG_POST_ECC_ON | \
161 CFG_POST_ETHER | \
162 CFG_POST_FPU | \
163 CFG_POST_I2C | \
164 CFG_POST_MEMORY | \
165 CFG_POST_RTC | \
166 CFG_POST_SPR | \
167 CFG_POST_UART | \
168 CFG_POST_SYSMON | \
169 CFG_POST_WATCHDOG | \
170 CFG_POST_DSP | \
171 CFG_POST_BSPEC1 | \
172 CFG_POST_BSPEC2 | \
173 CFG_POST_BSPEC3 | \
174 CFG_POST_BSPEC4 | \
175 CFG_POST_BSPEC5)
176
177 #define CONFIG_POST_WATCHDOG {\
178 "Watchdog timer test", \
179 "watchdog", \
180 "This test checks the watchdog timer.", \
181 POST_RAM | POST_POWERON | POST_SLOWTEST | POST_MANUAL | POST_REBOOT, \
182 &lwmon5_watchdog_post_test, \
183 NULL, \
184 NULL, \
185 CFG_POST_WATCHDOG \
186 }
187
188 #define CONFIG_POST_BSPEC1 {\
189 "dsPIC init test", \
190 "dspic_init", \
191 "This test returns result of dsPIC READY test run earlier.", \
192 POST_RAM | POST_ALWAYS, \
193 &dspic_init_post_test, \
194 NULL, \
195 NULL, \
196 CFG_POST_BSPEC1 \
197 }
198
199 #define CONFIG_POST_BSPEC2 {\
200 "dsPIC test", \
201 "dspic", \
202 "This test gets result of dsPIC POST and dsPIC version.", \
203 POST_RAM | POST_ALWAYS, \
204 &dspic_post_test, \
205 NULL, \
206 NULL, \
207 CFG_POST_BSPEC2 \
208 }
209
210 #define CONFIG_POST_BSPEC3 {\
211 "FPGA test", \
212 "fpga", \
213 "This test checks FPGA registers and memory.", \
214 POST_RAM | POST_ALWAYS, \
215 &fpga_post_test, \
216 NULL, \
217 NULL, \
218 CFG_POST_BSPEC3 \
219 }
220
221 #define CONFIG_POST_BSPEC4 {\
222 "GDC test", \
223 "gdc", \
224 "This test checks GDC registers and memory.", \
225 POST_RAM | POST_ALWAYS, \
226 &gdc_post_test, \
227 NULL, \
228 NULL, \
229 CFG_POST_BSPEC4 \
230 }
231
232 #define CONFIG_POST_BSPEC5 {\
233 "SYSMON1 test", \
234 "sysmon1", \
235 "This test checks GPIO_62_EPX pin indicating power failure.", \
236 POST_RAM | POST_MANUAL | POST_NORMAL | POST_SLOWTEST, \
237 &sysmon1_post_test, \
238 NULL, \
239 NULL, \
240 CFG_POST_BSPEC5 \
241 }
242
243 #define CFG_POST_CACHE_ADDR 0x7fff0000 /* free virtual address */
244 #define CONFIG_LOGBUFFER
245 #define CONFIG_ALT_LH_ADDR (CFG_PERIPHERAL_BASE + GPT0_COMP1)
246 #define CONFIG_ALT_LB_ADDR (CFG_OCM_BASE)
247 #define CFG_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
248
249 /*-----------------------------------------------------------------------
250 * I2C
251 *----------------------------------------------------------------------*/
252 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
253 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
254 #define CFG_I2C_SPEED 100000 /* I2C speed and slave address */
255 #define CFG_I2C_SLAVE 0x7F
256
257 #define CFG_I2C_EEPROM_ADDR 0x53 /* EEPROM AT24C128 */
258 #define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
259 #define CFG_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel AT24C128 has */
260 /* 64 byte page write mode using*/
261 /* last 6 bits of the address */
262 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
263 #define CFG_EEPROM_PAGE_WRITE_ENABLE
264
265 #define CONFIG_RTC_PCF8563 1 /* enable Philips PCF8563 RTC */
266 #define CFG_I2C_RTC_ADDR 0x51 /* Philips PCF8563 RTC address */
267 #define CFG_I2C_KEYBD_ADDR 0x56 /* PIC LWE keyboard */
268 #define CFG_I2C_DSPIC_IO_ADDR 0x57 /* PIC I/O addr */
269
270 #define CONFIG_POST_KEY_MAGIC "3C+3E" /* press F3 + F5 keys to force POST */
271 #if 0
272 #define CONFIG_AUTOBOOT_KEYED /* Enable "password" protection */
273 #define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
274 #define CONFIG_AUTOBOOT_DELAY_STR " " /* "password" */
275 #endif
276
277 #define CONFIG_PREBOOT "setenv bootdelay 15"
278
279 #undef CONFIG_BOOTARGS
280
281 #define CONFIG_EXTRA_ENV_SETTINGS \
282 "hostname=lwmon5\0" \
283 "netdev=eth0\0" \
284 "unlock=yes\0" \
285 "logversion=2\0" \
286 "nfsargs=setenv bootargs root=/dev/nfs rw " \
287 "nfsroot=${serverip}:${rootpath}\0" \
288 "ramargs=setenv bootargs root=/dev/ram rw\0" \
289 "addip=setenv bootargs ${bootargs} " \
290 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
291 ":${hostname}:${netdev}:off panic=1\0" \
292 "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
293 "addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\
294 "flash_nfs=run nfsargs addip addtty addmisc;" \
295 "bootm ${kernel_addr}\0" \
296 "flash_self=run ramargs addip addtty addmisc;" \
297 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
298 "net_nfs=tftp 200000 ${bootfile};" \
299 "run nfsargs addip addtty addmisc;bootm\0" \
300 "rootpath=/opt/eldk/ppc_4xxFP\0" \
301 "bootfile=/tftpboot/lwmon5/uImage\0" \
302 "kernel_addr=FC000000\0" \
303 "ramdisk_addr=FC180000\0" \
304 "load=tftp 200000 /tftpboot/${hostname}/u-boot.bin\0" \
305 "update=protect off FFF80000 FFFFFFFF;era FFF80000 FFFFFFFF;" \
306 "cp.b 200000 FFF80000 80000\0" \
307 "upd=run load update\0" \
308 "lwe_env=tftp 200000 /tftpboot.dev/lwmon5/env_uboot.bin;" \
309 "autoscr 200000\0" \
310 ""
311 #define CONFIG_BOOTCOMMAND "run flash_self"
312
313 #if 0
314 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */
315 #else
316 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
317 #endif
318
319 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
320 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
321
322 #define CONFIG_IBM_EMAC4_V4 1
323 #define CONFIG_MII 1 /* MII PHY management */
324 #define CONFIG_PHY_ADDR 3 /* PHY address, See schematics */
325
326 #define CONFIG_PHY_RESET 1 /* reset phy upon startup */
327 #define CONFIG_PHY_RESET_DELAY 300
328
329 #define CONFIG_HAS_ETH0
330 #define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
331
332 #define CONFIG_NET_MULTI 1
333 #define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
334 #define CONFIG_PHY1_ADDR 1
335
336 /* Video console */
337 #define CONFIG_VIDEO
338 #define CONFIG_VIDEO_MB862xx
339 #define CONFIG_CFB_CONSOLE
340 #define CONFIG_VIDEO_LOGO
341 #define CONFIG_CONSOLE_EXTRA_INFO
342 #define VIDEO_FB_16BPP_PIXEL_SWAP
343
344 #define CONFIG_VGA_AS_SINGLE_DEVICE
345 #define CONFIG_VIDEO_SW_CURSOR
346 #define CONFIG_SPLASH_SCREEN
347
348 /* USB */
349 #ifdef CONFIG_440EPX
350 #define CONFIG_USB_OHCI
351 #define CONFIG_USB_STORAGE
352
353 /* Comment this out to enable USB 1.1 device */
354 #define USB_2_0_DEVICE
355
356 #endif /* CONFIG_440EPX */
357
358 /* Partitions */
359 #define CONFIG_MAC_PARTITION
360 #define CONFIG_DOS_PARTITION
361 #define CONFIG_ISO_PARTITION
362
363 /*
364 * BOOTP options
365 */
366 #define CONFIG_BOOTP_BOOTFILESIZE
367 #define CONFIG_BOOTP_BOOTPATH
368 #define CONFIG_BOOTP_GATEWAY
369 #define CONFIG_BOOTP_HOSTNAME
370
371 /*
372 * Command line configuration.
373 */
374 #include <config_cmd_default.h>
375
376 #define CONFIG_CMD_ASKENV
377 #define CONFIG_CMD_DATE
378 #define CONFIG_CMD_DHCP
379 #define CONFIG_CMD_DIAG
380 #define CONFIG_CMD_EEPROM
381 #define CONFIG_CMD_ELF
382 #define CONFIG_CMD_FAT
383 #define CONFIG_CMD_I2C
384 #define CONFIG_CMD_IRQ
385 #define CONFIG_CMD_LOG
386 #define CONFIG_CMD_MII
387 #define CONFIG_CMD_NET
388 #define CONFIG_CMD_NFS
389 #define CONFIG_CMD_PCI
390 #define CONFIG_CMD_PING
391 #define CONFIG_CMD_REGINFO
392 #define CONFIG_CMD_SDRAM
393
394 #ifdef CONFIG_VIDEO
395 #define CONFIG_CMD_BMP
396 #endif
397
398 #ifdef CONFIG_440EPX
399 #define CONFIG_CMD_USB
400 #endif
401
402 /*-----------------------------------------------------------------------
403 * Miscellaneous configurable options
404 *----------------------------------------------------------------------*/
405 #define CONFIG_SUPPORT_VFAT
406
407 #define CFG_LONGHELP /* undef to save memory */
408 #define CFG_PROMPT "=> " /* Monitor Command Prompt */
409
410 #define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
411 #ifdef CFG_HUSH_PARSER
412 #define CFG_PROMPT_HUSH_PS2 "> "
413 #endif
414
415 #if defined(CONFIG_CMD_KGDB)
416 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
417 #else
418 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
419 #endif
420 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
421 #define CFG_MAXARGS 16 /* max number of command args */
422 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
423
424 #define CFG_MEMTEST_START 0x0400000 /* memtest works on */
425 #define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
426
427 #define CFG_LOAD_ADDR 0x100000 /* default load address */
428 #define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
429
430 #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
431
432 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
433 #define CONFIG_LOOPW 1 /* enable loopw command */
434 #define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
435 #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
436
437 /*-----------------------------------------------------------------------
438 * PCI stuff
439 *----------------------------------------------------------------------*/
440 /* General PCI */
441 #define CONFIG_PCI /* include pci support */
442 #undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
443 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
444 #define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
445
446 /* Board-specific PCI */
447 #define CFG_PCI_TARGET_INIT
448 #define CFG_PCI_MASTER_INIT
449
450 #define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
451 #define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
452
453 #define CONFIG_HW_WATCHDOG 1 /* Use external HW-Watchdog */
454 #define CONFIG_WD_PERIOD 40000 /* in usec */
455
456 /*
457 * For booting Linux, the board info and command line data
458 * have to be in the first 8 MB of memory, since this is
459 * the maximum mapped by the Linux kernel during initialization.
460 */
461 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
462
463 /*-----------------------------------------------------------------------
464 * External Bus Controller (EBC) Setup
465 *----------------------------------------------------------------------*/
466 #define CFG_FLASH CFG_FLASH_BASE
467
468 /* Memory Bank 0 (NOR-FLASH) initialization */
469 #define CFG_EBC_PB0AP 0x03050200
470 #define CFG_EBC_PB0CR (CFG_FLASH | 0xfc000)
471
472 /* Memory Bank 1 (Lime) initialization */
473 #define CFG_EBC_PB1AP 0x01004380
474 #define CFG_EBC_PB1CR (CFG_LIME_BASE_0 | 0xdc000)
475
476 /* Memory Bank 2 (FPGA) initialization */
477 #define CFG_EBC_PB2AP 0x01004400
478 #define CFG_EBC_PB2CR (CFG_FPGA_BASE_0 | 0x1c000)
479
480 /* Memory Bank 3 (FPGA2) initialization */
481 #define CFG_EBC_PB3AP 0x01004400
482 #define CFG_EBC_PB3CR (CFG_FPGA_BASE_1 | 0x1c000)
483
484 #define CFG_EBC_CFG 0xb8400000
485
486 /*-----------------------------------------------------------------------
487 * Graphics (Fujitsu Lime)
488 *----------------------------------------------------------------------*/
489 /* SDRAM Clock frequency adjustment register */
490 #define CFG_LIME_SDRAM_CLOCK 0xC1FC0038
491 /* Lime Clock frequency is to set 100MHz */
492 #define CFG_LIME_CLOCK_100MHZ 0x00000
493 #if 0
494 /* Lime Clock frequency for 133MHz */
495 #define CFG_LIME_CLOCK_133MHZ 0x10000
496 #endif
497
498 /* SDRAM Parameter register */
499 #define CFG_LIME_MMR 0xC1FCFFFC
500 /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars
501 and pixel flare on display when 133MHz was configured. According to
502 SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */
503 #ifdef CFG_LIME_CLOCK_133MHZ
504 #define CFG_LIME_MMR_VALUE 0x414FB7F3
505 #else
506 #define CFG_LIME_MMR_VALUE 0x414FB7F2
507 #endif
508
509 /*-----------------------------------------------------------------------
510 * GPIO Setup
511 *----------------------------------------------------------------------*/
512 #define CFG_GPIO_PHY1_RST 12
513 #define CFG_GPIO_FLASH_WP 14
514 #define CFG_GPIO_PHY0_RST 22
515 #define CFG_GPIO_DSPIC_READY 51
516 #define CFG_GPIO_EEPROM_EXT_WP 55
517 #define CFG_GPIO_HIGHSIDE 56
518 #define CFG_GPIO_EEPROM_INT_WP 57
519 #define CFG_GPIO_BOARD_RESET 58
520 #define CFG_GPIO_LIME_S 59
521 #define CFG_GPIO_LIME_RST 60
522 #define CFG_GPIO_SYSMON_STATUS 62
523 #define CFG_GPIO_WATCHDOG 63
524
525 /*-----------------------------------------------------------------------
526 * PPC440 GPIO Configuration
527 */
528 #define CFG_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
529 { \
530 /* GPIO Core 0 */ \
531 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \
532 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \
533 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \
534 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \
535 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \
536 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \
537 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \
538 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \
539 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \
540 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \
541 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \
542 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \
543 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \
544 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \
545 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \
546 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO15 */ \
547 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 GMCTxD(4) */ \
548 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 GMCTxD(5) */ \
549 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 GMCTxD(6) */ \
550 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 GMCTxD(7) */ \
551 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \
552 {GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \
553 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \
554 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \
555 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO24 GMCTxD(2) */ \
556 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO25 GMCTxD(3) */ \
557 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \
558 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \
559 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \
560 {GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \
561 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \
562 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \
563 }, \
564 { \
565 /* GPIO Core 1 */ \
566 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \
567 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \
568 {GPIO1_BASE, GPIO_OUT, GPIO_ALT3, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \
569 {GPIO1_BASE, GPIO_IN , GPIO_ALT3, GPIO_OUT_0}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \
570 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \
571 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \
572 {GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \
573 {GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \
574 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \
575 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \
576 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \
577 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \
578 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \
579 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \
580 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \
581 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \
582 {GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \
583 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO49 Unselect via TraceSelect Bit */ \
584 {GPIO1_BASE, GPIO_IN, GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \
585 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \
586 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \
587 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \
588 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \
589 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55 Unselect via TraceSelect Bit */ \
590 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \
591 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57 Unselect via TraceSelect Bit */ \
592 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \
593 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \
594 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \
595 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \
596 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \
597 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \
598 } \
599 }
600
601 /*
602 * Internal Definitions
603 *
604 * Boot Flags
605 */
606 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
607 #define BOOTFLAG_WARM 0x02 /* Software reboot */
608
609 #if defined(CONFIG_CMD_KGDB)
610 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
611 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
612 #endif
613 #endif /* __CONFIG_H */
"Das U-Boot" Source Tree