include/configs/m53evk.h

   1 /*
   2  * DENX M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MX53
  12 #define CONFIG_MXC_GPIO
  13 #define CONFIG_SYS_HZ           1000
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_BOARD_EARLY_INIT_F
  19 #define CONFIG_REVISION_TAG
  20 #define CONFIG_SYS_NO_FLASH
  21
  22 /*
  23  * U-Boot Commands
  24  */
  25 #include <config_cmd_default.h>
  26 #define CONFIG_DISPLAY_BOARDINFO
  27 #define CONFIG_DOS_PARTITION
  28
  29 #define CONFIG_CMD_DATE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_EXT2
  32 #define CONFIG_CMD_FAT
  33 #define CONFIG_CMD_I2C
  34 #define CONFIG_CMD_MII
  35 #define CONFIG_CMD_MMC
  36 #define CONFIG_CMD_NAND
  37 #define CONFIG_CMD_NET
  38 #define CONFIG_CMD_PING
  39 #define CONFIG_CMD_SATA
  40 #define CONFIG_CMD_USB
  41
  42 /*
  43  * Memory configurations
  44  */
  45 #define CONFIG_NR_DRAM_BANKS            2
  46 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  47 #define PHYS_SDRAM_1_SIZE               (512 * 1024 * 1024)
  48 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  49 #define PHYS_SDRAM_2_SIZE               (512 * 1024 * 1024)
  50 #define PHYS_SDRAM_SIZE                 (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
  51 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  52 #define CONFIG_SYS_MEMTEST_START        0x70000000
  53 #define CONFIG_SYS_MEMTEST_END          0xaff00000
  54
  55 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  56 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  57 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  58
  59 #define CONFIG_SYS_INIT_SP_OFFSET \
  60         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  61 #define CONFIG_SYS_INIT_SP_ADDR \
  62         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  63
  64 #define CONFIG_SYS_TEXT_BASE            0x71000000
  65
  66 /*
  67  * U-Boot general configurations
  68  */
  69 #define CONFIG_SYS_LONGHELP
  70 #define CONFIG_SYS_PROMPT       "=> "
  71 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  72 #define CONFIG_SYS_PBSIZE       \
  73         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  74                                                 /* Print buffer size */
  75 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  76 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  77                                                 /* Boot argument buffer size */
  78 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  79 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  80 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  81 #define CONFIG_SYS_HUSH_PARSER
  82
  83 /*
  84  * Serial Driver
  85  */
  86 #define CONFIG_MXC_UART
  87 #define CONFIG_MXC_UART_BASE            UART2_BASE
  88 #define CONFIG_CONS_INDEX               1
  89 #define CONFIG_BAUDRATE                 115200
  90
  91 /*
  92  * MMC Driver
  93  */
  94 #ifdef CONFIG_CMD_MMC
  95 #define CONFIG_MMC
  96 #define CONFIG_GENERIC_MMC
  97 #define CONFIG_FSL_ESDHC
  98 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  99 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 100 #endif
 101
 102 /*
 103  * NAND
 104  */
 105 #define CONFIG_ENV_SIZE                 (16 * 1024)
 106 #ifdef CONFIG_CMD_NAND
 107 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 108 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
 109 #define CONFIG_NAND_MXC
 110 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
 111 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
 112 #define CONFIG_SYS_NAND_LARGEPAGE
 113 #define CONFIG_MXC_NAND_HWECC
 114 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 115
 116 /* Environment is in NAND */
 117 #define CONFIG_ENV_IS_IN_NAND
 118 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 119 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 120 #define CONFIG_ENV_RANGE                (512 * 1024)
 121 #define CONFIG_ENV_OFFSET               0x100000
 122 #define CONFIG_ENV_OFFSET_REDUND        \
 123                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 124
 125 #define CONFIG_CMD_UBI
 126 #define CONFIG_CMD_UBIFS
 127 #define CONFIG_CMD_MTDPARTS
 128 #define CONFIG_RBTREE
 129 #define CONFIG_LZO
 130 #define CONFIG_MTD_DEVICE
 131 #define CONFIG_MTD_PARTITIONS
 132 #define MTDIDS_DEFAULT                  "nand0=mxc-nand"
 133 #define MTDPARTS_DEFAULT                        \
 134         "mtdparts=mxc-nand:"                    \
 135                 "1m(bootloader)ro,"             \
 136                 "512k(environment),"            \
 137                 "512k(redundant-environment),"  \
 138                 "4m(kernel),"                   \
 139                 "128k(fdt),"                    \
 140                 "8m(ramdisk),"                  \
 141                 "-(filesystem)"
 142 #else
 143 #define CONFIG_ENV_IS_NOWHERE
 144 #endif
 145
 146 /*
 147  * Ethernet on SOC (FEC)
 148  */
 149 #ifdef CONFIG_CMD_NET
 150 #define CONFIG_FEC_MXC
 151 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 152 #define CONFIG_FEC_MXC_PHYADDR          0x0
 153 #define CONFIG_MII
 154 #define CONFIG_DISCOVER_PHY
 155 #define CONFIG_FEC_XCV_TYPE             RMII
 156 #define CONFIG_PHYLIB
 157 #define CONFIG_PHY_MICREL
 158 #endif
 159
 160 /*
 161  * I2C
 162  */
 163 #ifdef CONFIG_CMD_I2C
 164 #define CONFIG_HARD_I2C
 165 #define CONFIG_I2C_MXC
 166 #define CONFIG_SYS_I2C_BASE             I2C2_BASE_ADDR
 167 #define CONFIG_SYS_I2C_SPEED            100000
 168 #endif
 169
 170 /*
 171  * RTC
 172  */
 173 #ifdef CONFIG_CMD_DATE
 174 #define CONFIG_RTC_M41T62
 175 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 176 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 177 #endif
 178
 179 /*
 180  * USB
 181  */
 182 #ifdef CONFIG_CMD_USB
 183 #define CONFIG_USB_EHCI
 184 #define CONFIG_USB_EHCI_MX5
 185 #define CONFIG_USB_STORAGE
 186 #define CONFIG_USB_HOST_ETHER
 187 #define CONFIG_USB_ETHER_ASIX
 188 #define CONFIG_USB_ETHER_SMSC95XX
 189 #define CONFIG_MXC_USB_PORT             1
 190 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 191 #define CONFIG_MXC_USB_FLAGS            0
 192 #endif
 193
 194 /*
 195  * SATA
 196  */
 197 #ifdef CONFIG_CMD_SATA
 198 #define CONFIG_DWC_AHSATA
 199 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 200 #define CONFIG_DWC_AHSATA_PORT_ID       0
 201 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 202 #define CONFIG_LBA48
 203 #define CONFIG_LIBATA
 204 #endif
 205
 206 /*
 207  * Boot Linux
 208  */
 209 #define CONFIG_CMDLINE_TAG
 210 #define CONFIG_INITRD_TAG
 211 #define CONFIG_REVISION_TAG
 212 #define CONFIG_SETUP_MEMORY_TAGS
 213 #define CONFIG_BOOTDELAY        3
 214 #define CONFIG_BOOTFILE         "m53evk/uImage"
 215 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 216 #define CONFIG_LOADADDR         0x70800000
 217 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 218 #define CONFIG_OF_LIBFDT
 219
 220 /*
 221  * NAND SPL
 222  */
 223 #define CONFIG_SPL
 224 #define CONFIG_SPL_FRAMEWORK
 225 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 226 #define CONFIG_SPL_BOARD_INIT
 227 #define CONFIG_SPL_TEXT_BASE            0x70008000
 228 #define CONFIG_SPL_PAD_TO               0x8000
 229 #define CONFIG_SPL_STACK                0x70004000
 230 #define CONFIG_SPL_GPIO_SUPPORT
 231 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 232 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 233 #define CONFIG_SPL_NAND_SUPPORT
 234 #define CONFIG_SPL_SERIAL_SUPPORT
 235
 236 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 237 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 238 #define CONFIG_SYS_NAND_OOBSIZE         64
 239 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 240 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 241 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 242
 243 #endif  /* __M53EVK_CONFIG_H__ */