include/configs/mcc200.h

   1 /*
   2  * (C) Copyright 2006
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24 #ifndef __CONFIG_H
  25 #define __CONFIG_H
  26
  27 /*
  28  * High Level Configuration Options
  29  * (easy to change)
  30  */
  31
  32 #define CONFIG_MPC5200
  33 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU               */
  34 #define CONFIG_MCC200           1       /* ... on MCC200 board                  */
  35
  36 #define CFG_MPC5XXX_CLKIN       33000000 /* ... running at 33MHz                */
  37
  38 #define CONFIG_MISC_INIT_R
  39
  40 #define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH     */
  41 #define BOOTFLAG_WARM           0x02    /* Software reboot                      */
  42
  43 #define CFG_CACHELINE_SIZE      32      /* For MPC5xxx CPUs                     */
  44 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
  45 #  define CFG_CACHELINE_SHIFT   5       /* log base 2 of the above value        */
  46 #endif
  47
  48 /*
  49  * Serial console configuration
  50  *
  51  *  To select console on the one of 8 external UARTs,
  52  * define CONFIG_QUART_CONSOLE as 1, 2, 3, or 4 for the first Quad UART,
  53  * or as 5, 6, 7, or 8 for the second Quad UART.
  54  * COM11, COM12, COM13, COM14 are located on the second Quad UART.
  55  *
  56  *  CONFIG_PSC_CONSOLE must be undefined in this case.
  57  */
  58 #if !defined(CONFIG_PRS200)
  59 /* MCC200 configuration: */
  60 #ifdef CONFIG_CONSOLE_COM12
  61 #define CONFIG_QUART_CONSOLE    6       /* console is on UARTF of QUART2        */
  62 #else
  63 #define CONFIG_QUART_CONSOLE    8       /* console is on UARTH of QUART2        */
  64 #endif
  65 #else
  66 /* PRS200 configuration: */
  67 #undef CONFIG_QUART_CONSOLE
  68 #endif /* CONFIG_PRS200 */
  69 /*
  70  *  To select console on PSC1, define CONFIG_PSC_CONSOLE as 1
  71  * and undefine CONFIG_QUART_CONSOLE.
  72  */
  73 #if !defined(CONFIG_PRS200)
  74 /* MCC200 configuration: */
  75 #define CONFIG_SERIAL_MULTI     1
  76 #define CONFIG_PSC_CONSOLE      1       /* PSC1 may be COM */
  77 #define CONFIG_PSC_CONSOLE2     2       /* PSC2 is PSoC */
  78 #else
  79 /* PRS200 configuration: */
  80 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1           */
  81 #endif
  82 #if defined(CONFIG_QUART_CONSOLE) && defined(CONFIG_PSC_CONSOLE) && \
  83         !defined(CONFIG_SERIAL_MULTI)
  84 #error "Select only one console device!"
  85 #endif
  86 #define CONFIG_BAUDRATE         115200
  87 #define CFG_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
  88
  89 #define CONFIG_MII              1
  90
  91 #define CONFIG_DOS_PARTITION
  92
  93 /* USB */
  94 #define CONFIG_USB_OHCI
  95 #define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
  96 #define CONFIG_USB_STORAGE
  97 /* automatic software updates (see board/mcc200/auto_update.c) */
  98 #define CONFIG_AUTO_UPDATE 1
  99
 100 /*
 101  * Supported commands
 102  */
 103 #define CONFIG_COMMANDS        (CONFIG_CMD_DFL  | \
 104                                 ADD_USB_CMD     | \
 105                                 CFG_CMD_BEDBUG  | \
 106                                 CFG_CMD_FAT     | \
 107                                 CFG_CMD_I2C)
 108
 109 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 110 #include <cmd_confdefs.h>
 111
 112 /*
 113  * Autobooting
 114  */
 115 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 116
 117 #define CONFIG_PREBOOT  "echo;" \
 118         "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
 119         "echo"
 120
 121 #undef  CONFIG_BOOTARGS
 122
 123 #define XMK_STR(x)              #x
 124 #define MK_STR(x)               XMK_STR(x)
 125
 126 #ifdef CONFIG_PRS200
 127 # define CFG__BOARDNAME         "prs200"
 128 # define CFG__LINUX_CONSOLE     "ttyS0"
 129 #else
 130 # define CFG__BOARDNAME         "mcc200"
 131 # define CFG__LINUX_CONSOLE     "ttyEU7"
 132 #endif
 133
 134 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 135         "netdev=eth0\0"                                                 \
 136         "hostname=" CFG__BOARDNAME "\0"                                 \
 137         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 138                 "nfsroot=${serverip}:${rootpath}\0"                     \
 139         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 140         "addip=setenv bootargs ${bootargs} "                            \
 141                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 142                 ":${hostname}:${netdev}:off panic=1\0"                  \
 143         "addcons=setenv bootargs ${bootargs} "                          \
 144                 "console=${console},${baudrate}\0"                      \
 145         "flash_nfs=run nfsargs addip addcons;"                          \
 146                 "bootm ${kernel_addr}\0"                                \
 147         "flash_self=run ramargs addip addcons;"                         \
 148                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 149         "net_nfs=tftp 200000 ${bootfile};"                              \
 150                 "run nfsargs addip addcons;bootm\0"                     \
 151         "console=" CFG__LINUX_CONSOLE "\0"                              \
 152         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 153         "bootfile=/tftpboot/" CFG__BOARDNAME "/uImage\0"                \
 154         "load=tftp 200000 /tftpboot/" CFG__BOARDNAME "/u-boot.bin\0"    \
 155         "text_base=" MK_STR(TEXT_BASE) "\0"                             \
 156         "update=protect off ${text_base} +${filesize};"                 \
 157                 "era ${text_base} +${filesize};"                        \
 158                 "cp.b 200000 ${text_base} ${filesize}\0"                \
 159         "unlock=yes\0"                                                  \
 160         ""
 161 #undef MK_STR
 162 #undef XMK_STR
 163
 164 #define CONFIG_BOOTCOMMAND      "run flash_self"
 165
 166 #define CFG_HUSH_PARSER         1       /* use "hush" command parser    */
 167 #define CFG_PROMPT_HUSH_PS2     "> "
 168
 169 /*
 170  * IPB Bus clocking configuration.
 171  */
 172 #define CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 173
 174 /*
 175  * I2C configuration
 176  */
 177 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 178 #define CFG_I2C_MODULE          2       /* Select I2C module #1 or #2 */
 179
 180 #define CFG_I2C_SPEED           100000 /* 100 kHz */
 181 #define CFG_I2C_SLAVE           0x7F
 182
 183 /*
 184  * Flash configuration (8,16 or 32 MB)
 185  * TEXT base always at 0xFFF00000
 186  * ENV_ADDR always at  0xFFF40000
 187  * FLASH_BASE at 0xFC000000 for 64 MB (only 32MB are supported, not enough addr lines!!!)
 188  *               0xFE000000 for 32 MB
 189  *               0xFF000000 for 16 MB
 190  *               0xFF800000 for  8 MB
 191  */
 192 #define CFG_FLASH_BASE          0xfc000000
 193 #define CFG_FLASH_SIZE          0x04000000
 194
 195 #define CFG_FLASH_CFI                           /* The flash is CFI compatible  */
 196 #define CFG_FLASH_CFI_DRIVER                    /* Use common CFI driver        */
 197
 198 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 199
 200 #define CFG_MAX_FLASH_BANKS     1       /* max number of memory banks           */
 201 #define CFG_MAX_FLASH_SECT      512     /* max number of sectors on one chip    */
 202
 203 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
 204 #define CFG_FLASH_PROTECTION    1       /* hardware flash protection            */
 205
 206 #define CFG_FLASH_ERASE_TOUT    120000  /* Timeout for Flash Erase (in ms)      */
 207 #define CFG_FLASH_WRITE_TOUT    500     /* Timeout for Flash Write (in ms)      */
 208
 209 #define CFG_FLASH_EMPTY_INFO            /* print 'E' for empty sector on flinfo */
 210 #define CFG_FLASH_QUIET_TEST    1       /* don't warn upon unknown flash        */
 211
 212 #define CFG_ENV_IS_IN_FLASH     1       /* use FLASH for environment vars       */
 213
 214 #define CFG_ENV_SECT_SIZE       0x40000 /* size of one complete sector  */
 215 #define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 216 #define CFG_ENV_SIZE            0x2000  /* Total Size of Environment Sector     */
 217
 218 /* Address and size of Redundant Environment Sector     */
 219 #define CFG_ENV_ADDR_REDUND     (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 220 #define CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
 221
 222 #define CONFIG_ENV_OVERWRITE    1       /* allow modification of vendor params */
 223
 224 #if TEXT_BASE == CFG_FLASH_BASE
 225 #define CFG_LOWBOOT     1
 226 #endif
 227
 228 /*
 229  * Memory map
 230  */
 231 #define CFG_MBAR                0xf0000000
 232 #define CFG_SDRAM_BASE          0x00000000
 233 #define CFG_DEFAULT_MBAR        0x80000000
 234
 235 /* Use SRAM until RAM will be available */
 236 #define CFG_INIT_RAM_ADDR       MPC5XXX_SRAM
 237 #define CFG_INIT_RAM_END        MPC5XXX_SRAM_SIZE       /* End of used area in DPRAM */
 238
 239
 240 #define CFG_GBL_DATA_SIZE       128     /* size in bytes reserved for initial data */
 241 #define CFG_GBL_DATA_OFFSET     (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 242 #define CFG_INIT_SP_OFFSET      CFG_GBL_DATA_OFFSET
 243
 244 #define CFG_MONITOR_BASE        TEXT_BASE
 245 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
 246 #   define CFG_RAMBOOT          1
 247 #endif
 248
 249 #define CFG_MONITOR_LEN         (256 << 10)     /* Reserve 256 kB for Monitor   */
 250 #define CFG_MALLOC_LEN          (512 << 10)     /* Reserve 512 kB for malloc()  */
 251 #define CFG_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux */
 252
 253 /*
 254  * Ethernet configuration
 255  */
 256 #define CONFIG_MPC5xxx_FEC      1
 257 /*
 258  * Define CONFIG_FEC_10MBIT to force FEC at 10Mb
 259  */
 260 /* #define CONFIG_FEC_10MBIT 1 */
 261 #define CONFIG_PHY_ADDR         1
 262
 263 /*
 264  * LCD Splash Screen
 265  */
 266 #if !defined(CONFIG_PRS200)
 267 #define CONFIG_LCD              1
 268 #define CONFIG_PROGRESSBAR 1
 269 #endif
 270
 271 #if defined(CONFIG_LCD)
 272 #define CONFIG_SPLASH_SCREEN    1
 273 #define CFG_CONSOLE_IS_IN_ENV   1
 274 #define LCD_BPP                 LCD_MONOCHROME
 275 #endif
 276
 277 /*
 278  * GPIO configuration
 279  */
 280 /* 0x10000004 = 32MB SDRAM */
 281 /* 0x90000004 = 64MB SDRAM */
 282 #if defined(CONFIG_LCD)
 283 /* set PSC2 in UART mode */
 284 #define CFG_GPS_PORT_CONFIG     0x00000044
 285 #else
 286 #define CFG_GPS_PORT_CONFIG     0x00000004
 287 #endif
 288
 289 /*
 290  * Miscellaneous configurable options
 291  */
 292 #define CFG_LONGHELP                    /* undef to save memory         */
 293 #define CFG_PROMPT              "=> "   /* Monitor Command Prompt       */
 294 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 295 #define CFG_CBSIZE              1024    /* Console I/O Buffer Size      */
 296 #else
 297 #define CFG_CBSIZE              256     /* Console I/O Buffer Size      */
 298 #endif
 299 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)   /* Print Buffer Size    */
 300 #define CFG_MAXARGS             16              /* max number of command args   */
 301 #define CFG_BARGSIZE            CFG_CBSIZE      /* Boot Argument Buffer Size    */
 302
 303 #define CFG_MEMTEST_START       0x00100000      /* memtest works on     */
 304 #define CFG_MEMTEST_END         0x00f00000      /* 1 ... 15 MB in DRAM  */
 305
 306 #define CFG_LOAD_ADDR           0x100000        /* default load address */
 307
 308 #define CFG_HZ                  1000    /* decrementer freq: 1 ms ticks */
 309
 310 /*
 311  * Various low-level settings
 312  */
 313 #define CFG_HID0_INIT           HID0_ICE | HID0_ICFI
 314 #define CFG_HID0_FINAL          HID0_ICE
 315
 316 #define CFG_BOOTCS_START        CFG_FLASH_BASE
 317 #define CFG_BOOTCS_SIZE         CFG_FLASH_SIZE
 318 #define CFG_BOOTCS_CFG          0x0004fb00
 319 #define CFG_CS0_START           CFG_FLASH_BASE
 320 #define CFG_CS0_SIZE            CFG_FLASH_SIZE
 321
 322 /* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
 323 #define CFG_CS2_START           0x80000000
 324 #define CFG_CS2_SIZE            0x00001000
 325 #define CFG_CS2_CFG             0x1d300
 326
 327 /* Second Quad UART @0x80010000 */
 328 #define CFG_CS1_START           0x80010000
 329 #define CFG_CS1_SIZE            0x00001000
 330 #define CFG_CS1_CFG             0x1d300
 331
 332 /*
 333  *  Select one of quarts as a default
 334  * console. If undefined - PSC console
 335  * wil be default
 336  */
 337 #define CFG_CS_BURST            0x00000000
 338 #define CFG_CS_DEADCYCLE        0x33333333
 339
 340 #define CFG_RESET_ADDRESS       0xff000000
 341
 342 /*
 343  * QUART Expanders support
 344  */
 345 #if defined(CONFIG_QUART_CONSOLE)
 346 /*
 347  * We'll use NS16550 chip routines,
 348  */
 349 #define CFG_NS16550             1
 350 #define CFG_NS16550_SERIAL      1
 351 #define CONFIG_CONS_INDEX       1
 352 /*
 353  *  To achieve necessary offset on SC16C554
 354  * A0-A2 (register select) pins with NS16550
 355  * functions (in struct NS16550), REG_SIZE
 356  * should be 4, because A0-A2 pins are connected
 357  * to DA2-DA4 address bus lines.
 358  */
 359 #define CFG_NS16550_REG_SIZE    4
 360 /*
 361  * LocalPlus Bus already inited in cpu_init_f(),
 362  * so can work with QUART's chip selects.
 363  * One of four SC16C554 UARTs is selected with
 364  * A3-A4 (DA5-DA6) lines.
 365  */
 366 #if (CONFIG_QUART_CONSOLE > 0) && (CONFIG_QUART_CONSOLE < 5) && !defined(CONFIG_PRS200)
 367 #define CFG_NS16550_COM1        (CFG_CS2_START | (CONFIG_QUART_CONSOLE - 1)<<5)
 368 #elif (CONFIG_QUART_CONSOLE > 4) && (CONFIG_QUART_CONSOLE < 9)
 369 #define CFG_NS16550_COM1        (CFG_CS1_START | (CONFIG_QUART_CONSOLE - 5)<<5)
 370 #elif
 371 #error "Wrong QUART expander number."
 372 #endif
 373
 374 /*
 375  * SC16C554 chip's external crystal oscillator frequency
 376  * is 7.3728 MHz
 377  */
 378 #define CFG_NS16550_CLK         7372800
 379 #endif /* CONFIG_QUART_CONSOLE */
 380 /*-----------------------------------------------------------------------
 381  * USB stuff
 382  *-----------------------------------------------------------------------
 383  */
 384 #define CONFIG_USB_CLOCK        0x0001BBBB
 385 #define CONFIG_USB_CONFIG       0x00005000
 386
 387 #endif /* __CONFIG_H */