include/configs/mecp5200.h

   1 /*
   2  * (C) Copyright 2003-2004
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * See file CREDITS for list of people who contributed to this
   6  * project.
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License as
  10  * published by the Free Software Foundation; either version 2 of
  11  * the License, or (at your option) any later version.
  12  *
  13  * This program is distributed in the hope that it will be useful,
  14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16  * GNU General Public License for more details.
  17  *
  18  * You should have received a copy of the GNU General Public License
  19  * along with this program; if not, write to the Free Software
  20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  21  * MA 02111-1307 USA
  22  */
  23
  24
  25 /*************************************************************************
  26  * (c) 2005 esd gmbh Hannover
  27  *
  28  *
  29  * from IceCube.h file
  30  * by Reinhard Arlt reinhard.arlt@esd-electronics.com
  31  *
  32  *************************************************************************/
  33
  34 #ifndef __CONFIG_H
  35 #define __CONFIG_H
  36
  37 /*
  38  * High Level Configuration Options
  39  * (easy to change)
  40  */
  41
  42 #define CONFIG_MPC5200          1       /* This is an MPC5xxx CPU */
  43 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  44 #define CONFIG_ICECUBE          1       /* ... on IceCube board */
  45 #define CONFIG_MECP5200         1       /* ... on MECP5200  board */
  46 #define CONFIG_MPC5200_DDR      1       /* ... use DDR RAM      */
  47
  48 #ifndef CONFIG_SYS_TEXT_BASE
  49 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  50 #endif
  51
  52 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* ... running at 33.000000MHz */
  53
  54 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
  55
  56 /*
  57  * Serial console configuration
  58  */
  59 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  60 #if 0 /* test-only */
  61 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  62 #else
  63 #define CONFIG_BAUDRATE         9600    /* ... at 115200 bps */
  64 #endif
  65 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  66
  67 #define CONFIG_MII
  68 #if 0 /* test-only !!! */
  69 #define CONFIG_NET_MULTI        1
  70 #define CONFIG_EEPRO100         1
  71 #define CONFIG_SYS_RX_ETH_BUFFER        8  /* use 8 rx buffer on eepro100  */
  72 #define CONFIG_NS8382X          1
  73 #endif
  74
  75 /* Partitions */
  76 #define CONFIG_MAC_PARTITION
  77 #define CONFIG_DOS_PARTITION
  78
  79 /* USB */
  80 #if 0
  81 #define CONFIG_USB_OHCI
  82 #define CONFIG_USB_STORAGE
  83 #endif
  84
  85
  86 /*
  87  * BOOTP options
  88  */
  89 #define CONFIG_BOOTP_BOOTFILESIZE
  90 #define CONFIG_BOOTP_BOOTPATH
  91 #define CONFIG_BOOTP_GATEWAY
  92 #define CONFIG_BOOTP_HOSTNAME
  93
  94
  95 /*
  96  * Command line configuration.
  97  */
  98 #include <config_cmd_default.h>
  99
 100 #define CONFIG_CMD_EEPROM
 101 #define CONFIG_CMD_FAT
 102 #define CONFIG_CMD_EXT2
 103 #define CONFIG_CMD_I2C
 104 #define CONFIG_CMD_IDE
 105 #define CONFIG_CMD_BSP
 106 #define CONFIG_CMD_ELF
 107
 108
 109 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)                /* Boot low with 16 MB Flash */
 110 #   define CONFIG_SYS_LOWBOOT           1
 111 #   define CONFIG_SYS_LOWBOOT16 1
 112 #endif
 113 #if (CONFIG_SYS_TEXT_BASE == 0xFF800000)                /* Boot low with  8 MB Flash */
 114 #   define CONFIG_SYS_LOWBOOT           1
 115 #   define CONFIG_SYS_LOWBOOT08 1
 116 #endif
 117
 118 /*
 119  * Autobooting
 120  */
 121 #define CONFIG_BOOTDELAY        3       /* autoboot after 5 seconds */
 122
 123 #define CONFIG_PREBOOT  "echo;" \
 124         "echo Welcome to CBX-CPU5200 (mecp5200);" \
 125         "echo"
 126
 127 #undef  CONFIG_BOOTARGS
 128
 129 #define CONFIG_EXTRA_ENV_SETTINGS \
 130         "netdev=eth0\0" \
 131         "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \
 132         "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \
 133         "net_vxworks=tftp $(loadaddr) $(image);run vxworks_args;bootvx\0" \
 134         "vxworks_args=setenv bootargs fec(0,0)$(host):$(image) h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script)\0" \
 135         "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=$(serverip) e=$(ipaddr) g=$(gatewayip) u=$(user) $(pass) tn=$(target) s=$(script) o=fec0 \0" \
 136         "loadaddr=01000000\0" \
 137         "serverip=192.168.2.99\0" \
 138         "gatewayip=10.0.0.79\0" \
 139         "user=mu\0" \
 140         "target=mecp5200.esd\0" \
 141         "script=mecp5200.bat\0" \
 142         "image=/tftpboot/vxWorks_mecp5200\0" \
 143         "ipaddr=10.0.13.196\0" \
 144         "netmask=255.255.0.0\0" \
 145         ""
 146
 147 #define CONFIG_BOOTCOMMAND      "run flash_vxworks0"
 148
 149 /*
 150  * IPB Bus clocking configuration.
 151  */
 152 #undef CONFIG_SYS_IPBSPEED_133                  /* define for 133MHz speed */
 153 /*
 154  * I2C configuration
 155  */
 156 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 157 #define CONFIG_SYS_I2C_MODULE           2       /* Select I2C module #1 or #2 */
 158
 159 #define CONFIG_SYS_I2C_SPEED            86000 /* 100 kHz */
 160 #define CONFIG_SYS_I2C_SLAVE            0x7F
 161
 162 /*
 163  * EEPROM configuration
 164  */
 165 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 166 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 167 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       5
 168 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 169 #define CONFIG_SYS_I2C_MULTI_EEPROMS            1
 170 /*
 171  * Flash configuration
 172  */
 173 #define CONFIG_SYS_FLASH_BASE           0xFFC00000
 174 #define CONFIG_SYS_FLASH_SIZE           0x00400000
 175 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x003E0000)
 176 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks      */
 177 #define CONFIG_SYS_MAX_FLASH_SECT       512
 178
 179 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Flash Erase Timeout (in ms)  */
 180 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (in ms)  */
 181
 182 /*
 183  * Environment settings
 184  */
 185 #if 1 /* test-only */
 186 #define CONFIG_ENV_IS_IN_FLASH  1
 187 #define CONFIG_ENV_SIZE         0x10000
 188 #define CONFIG_ENV_SECT_SIZE    0x10000
 189 #define CONFIG_ENV_OVERWRITE    1
 190 #else
 191 #define CONFIG_ENV_IS_IN_EEPROM 1       /* use EEPROM for environment vars */
 192 #define CONFIG_ENV_OFFSET               0x0000  /* environment starts at the beginning of the EEPROM */
 193 #define CONFIG_ENV_SIZE         0x0400  /* 8192 bytes may be used for env vars*/
 194                                    /* total size of a CAT24WC32 is 8192 bytes */
 195 #define CONFIG_ENV_OVERWRITE    1
 196 #endif
 197
 198 #define CONFIG_FLASH_CFI_DRIVER 1          /* Flash is CFI conformant           */
 199 #define CONFIG_SYS_FLASH_CFI            1          /* Flash is CFI conformant           */
 200 #define CONFIG_SYS_FLASH_PROTECTION     1          /* use hardware protection           */
 201 #if 0
 202 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1       /* use buffered writes (20x faster)  */
 203 #endif
 204 #define CONFIG_SYS_FLASH_INCREMENT      0x00400000 /* size of  flash bank               */
 205 #define CONFIG_SYS_FLASH_BANKS_LIST  { CONFIG_SYS_FLASH_BASE }
 206 #define CONFIG_SYS_FLASH_EMPTY_INFO     1          /* show if bank is empty             */
 207
 208
 209 /*
 210  * Memory map
 211  */
 212 #define CONFIG_SYS_MBAR         0xF0000000
 213 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 214 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 215
 216 /* Use SRAM until RAM will be available */
 217 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 218 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE       /* Size of used area in DPRAM */
 219
 220
 221 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 222 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 223
 224 #define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
 225 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 226 #   define CONFIG_SYS_RAMBOOT           1
 227 #endif
 228
 229 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)     /* Reserve 192 kB for Monitor   */
 230 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 231 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 232
 233 /*
 234  * Ethernet configuration
 235  */
 236 #define CONFIG_MPC5xxx_FEC      1
 237 #define CONFIG_MPC5xxx_FEC_MII100
 238 /*
 239  * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
 240  */
 241 /* #define CONFIG_MPC5xxx_FEC_MII10 */
 242 #define CONFIG_PHY_ADDR         0x00
 243 #define CONFIG_UDP_CHECKSUM     1
 244
 245
 246 /*
 247  * GPIO configuration
 248  */
 249 #define CONFIG_SYS_GPS_PORT_CONFIG      0x01052444
 250
 251 /*
 252  * Miscellaneous configurable options
 253  */
 254 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 255 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt   */
 256 #if defined(CONFIG_CMD_KGDB)
 257 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 258 #else
 259 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 260 #endif
 261 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)      /* Print Buffer Size */
 262 #define CONFIG_SYS_MAXARGS              16              /* max number of command args   */
 263 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 264
 265 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 266 #define CONFIG_SYS_MEMTEST_END          0x00f00000      /* 1 ... 15 MB in DRAM  */
 267
 268 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 269
 270 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 271
 272 #define CONFIG_SYS_VXWORKS_MAC_PTR      0x00000000      /* Pass Ethernet MAC to VxWorks */
 273
 274 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 275 #if defined(CONFIG_CMD_KGDB)
 276 #  define CONFIG_SYS_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 277 #endif
 278
 279 /*
 280  * Various low-level settings
 281  */
 282 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 283 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 284
 285 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 286 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 287 #define CONFIG_SYS_BOOTCS_CFG           0x00085d00
 288
 289 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 290 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 291
 292 #define CONFIG_SYS_CS1_START            0xfd000000
 293 #define CONFIG_SYS_CS1_SIZE             0x00010000
 294 #define CONFIG_SYS_CS1_CFG              0x10101410
 295
 296 #define CONFIG_SYS_CS_BURST             0x00000000
 297 #define CONFIG_SYS_CS_DEADCYCLE 0x33333333
 298
 299 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 300
 301 /*-----------------------------------------------------------------------
 302  * USB stuff
 303  *-----------------------------------------------------------------------
 304  */
 305 #define CONFIG_USB_CLOCK        0x0001BBBB
 306 #define CONFIG_USB_CONFIG       0x00001000
 307
 308 /*-----------------------------------------------------------------------
 309  * IDE/ATA stuff Supports IDE harddisk
 310  *-----------------------------------------------------------------------
 311  */
 312
 313 #undef  CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 314
 315 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 316 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 317
 318 #define CONFIG_IDE_RESET                /* reset for ide supported      */
 319 #define CONFIG_IDE_PREINIT
 320
 321 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 322 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 323
 324 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 325
 326 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 327
 328 /* Offset for data I/O                  */
 329 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 330
 331 /* Offset for normal register accesses  */
 332 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 333
 334 /* Offset for alternate registers       */
 335 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 336
 337 /* Interval between registers           */
 338 #define CONFIG_SYS_ATA_STRIDE           4
 339
 340 #endif /* __CONFIG_H */