include/configs/mpc7448hpc2.h

   1 /*
   2  * Copyright (c) 2005 Freescale Semiconductor, Inc.
   3  *
   4  * (C) Copyright 2006
   5  * Alex Bounine , Tundra Semiconductor Corp.
   6  * Roy Zang     , <tie-fei.zang@freescale.com> Freescale Corp.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /*
  28  * board specific configuration options for Freescale
  29  * MPC7448HPC2 (High-Performance Computing II) (Taiga) board
  30  *
  31  */
  32
  33 #ifndef __CONFIG_H
  34 #define __CONFIG_H
  35
  36 /* Board Configuration Definitions */
  37 /* MPC7448HPC2 (High-Performance Computing II) (Taiga) board */
  38
  39 #define CONFIG_MPC7448HPC2
  40
  41 #define CONFIG_74xx
  42 #define CONFIG_HIGH_BATS        /* High BATs supported */
  43 #define CONFIG_ALTIVEC          /* undef to disable */
  44
  45 #define CONFIG_SYS_TEXT_BASE    0xFF000000
  46
  47 #define CONFIG_SYS_BOARD_NAME           "MPC7448 HPC II"
  48 #define CONFIG_IDENT_STRING     " Freescale MPC7448 HPC II"
  49
  50 #define CONFIG_SYS_OCN_CLK              133000000       /* 133 MHz */
  51 #define CONFIG_SYS_BUS_CLK              133000000
  52
  53 #define CONFIG_SYS_CLK_SPREAD           /* Enable Spread-Spectrum Clock generation */
  54
  55 #undef  CONFIG_ECC              /* disable ECC support */
  56
  57 #ifndef __ASSEMBLY__
  58 #include <galileo/core.h>
  59 #endif
  60
  61 /* Board-specific Initialization Functions to be called */
  62 #define CONFIG_SYS_BOARD_ASM_INIT
  63 #define CONFIG_BOARD_EARLY_INIT_F
  64 #define CONFIG_BOARD_EARLY_INIT_R
  65 #define CONFIG_MISC_INIT_R
  66
  67 #define CONFIG_HAS_ETH0
  68 #define CONFIG_HAS_ETH1
  69
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 /*
  73  * High Level Configuration Options
  74  * (easy to change)
  75  */
  76
  77 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115000 */
  78
  79 /*#define CONFIG_SYS_HUSH_PARSER */
  80 #undef CONFIG_SYS_HUSH_PARSER
  81
  82
  83 /* Pass open firmware flat tree */
  84 #define CONFIG_OF_LIBFDT        1
  85 #define CONFIG_OF_BOARD_SETUP   1
  86
  87 #define OF_TSI                  "tsi108@c0000000"
  88 #define OF_TBCLK                (bd->bi_busfreq / 8)
  89 #define OF_STDOUT_PATH          "/tsi108@c0000000/serial@7808"
  90
  91 /*
  92  * The following defines let you select what serial you want to use
  93  * for your console driver.
  94  *
  95  * what to do:
  96  * If you have hacked a serial cable onto the second DUART channel,
  97  * change the CONFIG_SYS_DUART port from 1 to 0 below.
  98  *
  99  */
 100
 101 #define CONFIG_CONS_INDEX       1
 102 #define CONFIG_SYS_NS16550
 103 #define CONFIG_SYS_NS16550_SERIAL
 104 #define CONFIG_SYS_NS16550_REG_SIZE     1
 105 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_OCN_CLK * 8
 106
 107 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7808)
 108 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_TSI108_CSR_RST_BASE+0x7C08)
 109
 110 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds */
 111 #define CONFIG_ZERO_BOOTDELAY_CHECK
 112
 113 #undef CONFIG_BOOTARGS
 114 /* #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */
 115
 116 #if (CONFIG_BOOTDELAY >= 0)
 117 #define CONFIG_BOOTCOMMAND      "tftpboot 0x400000 zImage.initrd.elf;\
 118  setenv bootargs $(bootargs) $(bootargs_root) nfsroot=$(serverip):$(rootpath) \
 119  ip=$(ipaddr):$(serverip)$(bootargs_end);  bootm 0x400000; "
 120
 121 #define CONFIG_BOOTARGS "console=ttyS0,115200"
 122 #endif
 123
 124 #undef CONFIG_EXTRA_ENV_SETTINGS
 125
 126 #define CONFIG_SERIAL   "No. 1"
 127
 128 /* Networking Configuration */
 129
 130 #define CONFIG_TSI108_ETH
 131 #define CONFIG_TSI108_ETH_NUM_PORTS     2
 132
 133
 134 #define CONFIG_BOOTFILE         "zImage.initrd.elf"
 135 #define CONFIG_LOADADDR         0x400000
 136
 137 /*-------------------------------------------------------------------------- */
 138
 139 #define CONFIG_LOADS_ECHO       0       /* echo off for serial download */
 140 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate changes */
 141
 142 #undef CONFIG_WATCHDOG          /* watchdog disabled */
 143
 144 /*
 145  * BOOTP options
 146  */
 147 #define CONFIG_BOOTP_SUBNETMASK
 148 #define CONFIG_BOOTP_GATEWAY
 149 #define CONFIG_BOOTP_HOSTNAME
 150 #define CONFIG_BOOTP_BOOTPATH
 151 #define CONFIG_BOOTP_BOOTFILESIZE
 152
 153
 154 /*
 155  * Command line configuration.
 156  */
 157 #include <config_cmd_default.h>
 158
 159 #define CONFIG_CMD_ASKENV
 160 #define CONFIG_CMD_CACHE
 161 #define CONFIG_CMD_PCI
 162 #define CONFIG_CMD_I2C
 163 #define CONFIG_CMD_SDRAM
 164 #define CONFIG_CMD_EEPROM
 165 #define CONFIG_CMD_FLASH
 166 #define CONFIG_CMD_SAVEENV
 167 #define CONFIG_CMD_BSP
 168 #define CONFIG_CMD_DHCP
 169 #define CONFIG_CMD_PING
 170 #define CONFIG_CMD_DATE
 171
 172
 173 /*set date in u-boot*/
 174 #define CONFIG_RTC_M48T35A
 175 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfc000000
 176 #define CONFIG_SYS_NVRAM_SIZE           0x8000
 177 /*
 178  * Miscellaneous configurable options
 179  */
 180 #define CONFIG_VERSION_VARIABLE         1
 181 #define CONFIG_TSI108_I2C
 182 #define CONFIG_SYS_I2C_SPEED            100000  /* I2C speed */
 183
 184 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* I2C EEPROM page 1 */
 185 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1       /* Bytes of address */
 186
 187 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 188 #define CONFIG_SYS_PROMPT       "=> "   /* Monitor Command Prompt */
 189
 190 #if defined(CONFIG_CMD_KGDB)
 191 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 192 #define CONFIG_KGDB_BAUDRATE    115200  /* speed to run kgdb serial port at */
 193 #else
 194 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 195 #endif
 196
 197 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)/* Print Buffer Size */
 198 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 199 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 200
 201 #define CONFIG_SYS_MEMTEST_START        0x00400000      /* memtest works on */
 202 #define CONFIG_SYS_MEMTEST_END          0x07c00000      /* 4 ... 124 MB in DRAM */
 203
 204 #define CONFIG_SYS_LOAD_ADDR    0x00400000      /* default load address */
 205
 206 #define CONFIG_SYS_HZ           1000            /* decr freq: 1ms ticks */
 207
 208 /*
 209  * Low Level Configuration Settings
 210  * (address mappings, register initial values, etc.)
 211  * You should know what you are doing if you make changes here.
 212  */
 213
 214 /*-----------------------------------------------------------------------
 215  * Definitions for initial stack pointer and data area
 216  */
 217
 218 /*
 219  * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
 220  * To an unused memory region. The stack will remain in cache until RAM
 221  * is initialized
 222  */
 223 #undef  CONFIG_SYS_INIT_RAM_LOCK
 224 #define CONFIG_SYS_INIT_RAM_ADDR        0x07d00000      /* unused memory region */
 225 #define CONFIG_SYS_INIT_RAM_SIZE        0x4000/* larger space - we have SDRAM initialized */
 226
 227 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 228
 229 /*-----------------------------------------------------------------------
 230  * Start addresses for the final memory configuration
 231  * (Set up by the startup code)
 232  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 233  */
 234
 235 #define CONFIG_SYS_SDRAM_BASE           0x00000000      /* first 256 MB of SDRAM */
 236 #define CONFIG_SYS_SDRAM1_BASE          0x10000000      /* next 256MB of SDRAM */
 237
 238 #define CONFIG_SYS_SDRAM2_BASE  0x40000000      /* beginning of non-cacheable alias for SDRAM - first 256MB */
 239 #define CONFIG_SYS_SDRAM3_BASE  0x50000000      /* next Non-Cacheable 256MB of SDRAM */
 240
 241 #define CONFIG_SYS_PCI_PFM_BASE 0x80000000      /* Prefetchable (cacheable) PCI/X PFM and SDRAM OCN (128MB+128MB) */
 242
 243 #define CONFIG_SYS_PCI_MEM32_BASE       0xE0000000      /* Non-Cacheable PCI/X MEM and SDRAM OCN (128MB+128MB) */
 244
 245 #define CONFIG_SYS_MISC_REGION_BASE     0xf0000000      /* Base Address for (PCI/X + Flash) region */
 246
 247 #define CONFIG_SYS_FLASH_BASE   0xff000000      /* Base Address of Flash device */
 248 #define CONFIG_SYS_FLASH_BASE2  0xfe000000      /* Alternate Flash Base Address */
 249
 250 #define CONFIG_VERY_BIG_RAM     /* we will use up to 256M memory for cause we are short of BATS */
 251
 252 #define PCI0_IO_BASE_BOOTM      0xfd000000
 253
 254 #define CONFIG_SYS_RESET_ADDRESS        0x3fffff00
 255 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 256 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* u-boot code base */
 257 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* Reserve 256 kB for malloc */
 258
 259 /* Peripheral Device section */
 260
 261 /*
 262  * Resources on the Tsi108
 263  */
 264
 265 #define CONFIG_SYS_TSI108_CSR_RST_BASE  0xC0000000      /* Tsi108 CSR base after reset */
 266 #define CONFIG_SYS_TSI108_CSR_BASE      CONFIG_SYS_TSI108_CSR_RST_BASE  /* Runtime Tsi108 CSR base */
 267
 268 #define ENABLE_PCI_CSR_BAR      /* enables access to Tsi108 CSRs from the PCI/X bus */
 269
 270 #undef  DISABLE_PBM
 271
 272 /*
 273  * PCI stuff
 274  *
 275  */
 276
 277 #define CONFIG_PCI              /* include pci support */
 278 #define CONFIG_TSI108_PCI       /* include tsi108 pci support */
 279
 280 #define PCI_HOST_ADAPTER        0       /* configure as pci adapter */
 281 #define PCI_HOST_FORCE          1       /* configure as pci host */
 282 #define PCI_HOST_AUTO           2       /* detected via arbiter enable */
 283
 284 #define CONFIG_PCI_HOST PCI_HOST_FORCE  /* select pci host function */
 285 #define CONFIG_PCI_PNP          /* do pci plug-and-play */
 286
 287 /* PCI MEMORY MAP section */
 288
 289 /* PCI view of System Memory */
 290 #define CONFIG_SYS_PCI_MEMORY_BUS       0x00000000
 291 #define CONFIG_SYS_PCI_MEMORY_PHYS      0x00000000
 292 #define CONFIG_SYS_PCI_MEMORY_SIZE      0x80000000
 293
 294 /* PCI Memory Space */
 295 #define CONFIG_SYS_PCI_MEM_BUS          (CONFIG_SYS_PCI_MEM_PHYS)
 296 #define CONFIG_SYS_PCI_MEM_PHYS (CONFIG_SYS_PCI_MEM32_BASE)     /* 0xE0000000 */
 297 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000      /* 256 MB space for PCI/X Mem + SDRAM OCN */
 298
 299 /* PCI I/O Space */
 300 #define CONFIG_SYS_PCI_IO_BUS           0x00000000
 301 #define CONFIG_SYS_PCI_IO_PHYS          0xfa000000      /* Changed from fd000000 */
 302
 303 #define CONFIG_SYS_PCI_IO_SIZE          0x01000000      /* 16MB */
 304
 305 /* PCI Config Space mapping */
 306 #define CONFIG_SYS_PCI_CFG_BASE 0xfb000000      /* Changed from FE000000 */
 307 #define CONFIG_SYS_PCI_CFG_SIZE 0x01000000      /* 16MB */
 308
 309 #define CONFIG_SYS_IBAT0U       0xFE0003FF
 310 #define CONFIG_SYS_IBAT0L       0xFE000002
 311
 312 #define CONFIG_SYS_IBAT1U       0x00007FFF
 313 #define CONFIG_SYS_IBAT1L       0x00000012
 314
 315 #define CONFIG_SYS_IBAT2U       0x80007FFF
 316 #define CONFIG_SYS_IBAT2L       0x80000022
 317
 318 #define CONFIG_SYS_IBAT3U       0x00000000
 319 #define CONFIG_SYS_IBAT3L       0x00000000
 320
 321 #define CONFIG_SYS_IBAT4U       0x00000000
 322 #define CONFIG_SYS_IBAT4L       0x00000000
 323
 324 #define CONFIG_SYS_IBAT5U       0x00000000
 325 #define CONFIG_SYS_IBAT5L       0x00000000
 326
 327 #define CONFIG_SYS_IBAT6U       0x00000000
 328 #define CONFIG_SYS_IBAT6L       0x00000000
 329
 330 #define CONFIG_SYS_IBAT7U       0x00000000
 331 #define CONFIG_SYS_IBAT7L       0x00000000
 332
 333 #define CONFIG_SYS_DBAT0U       0xE0003FFF
 334 #define CONFIG_SYS_DBAT0L       0xE000002A
 335
 336 #define CONFIG_SYS_DBAT1U       0x00007FFF
 337 #define CONFIG_SYS_DBAT1L       0x00000012
 338
 339 #define CONFIG_SYS_DBAT2U       0x00000000
 340 #define CONFIG_SYS_DBAT2L       0x00000000
 341
 342 #define CONFIG_SYS_DBAT3U       0xC0000003
 343 #define CONFIG_SYS_DBAT3L       0xC000002A
 344
 345 #define CONFIG_SYS_DBAT4U       0x00000000
 346 #define CONFIG_SYS_DBAT4L       0x00000000
 347
 348 #define CONFIG_SYS_DBAT5U       0x00000000
 349 #define CONFIG_SYS_DBAT5L       0x00000000
 350
 351 #define CONFIG_SYS_DBAT6U       0x00000000
 352 #define CONFIG_SYS_DBAT6L       0x00000000
 353
 354 #define CONFIG_SYS_DBAT7U       0x00000000
 355 #define CONFIG_SYS_DBAT7L       0x00000000
 356
 357 /* I2C addresses for the two DIMM SPD chips */
 358 #define DIMM0_I2C_ADDR  0x51
 359 #define DIMM1_I2C_ADDR  0x52
 360
 361 /*
 362  * For booting Linux, the board info and command line data
 363  * have to be in the first 8 MB of memory, since this is
 364  * the maximum mapped by the Linux kernel during initialization.
 365  */
 366 #define CONFIG_SYS_BOOTMAPSZ    (8<<20) /* Initial Memory map for Linux */
 367
 368 /*-----------------------------------------------------------------------
 369  * FLASH organization
 370  */
 371 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* Flash can be at one of two addresses */
 372 #define FLASH_BANK_SIZE         0x01000000      /* 16 MB Total */
 373 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE, /* CONFIG_SYS_FLASH_BASE2 */ }
 374
 375 #define CONFIG_FLASH_CFI_DRIVER
 376 #define CONFIG_SYS_FLASH_CFI
 377 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 378
 379 #define PHYS_FLASH_SIZE         0x01000000
 380 #define CONFIG_SYS_MAX_FLASH_SECT       (128)
 381
 382 #define CONFIG_ENV_IS_IN_NVRAM
 383 #define CONFIG_ENV_ADDR         0xFC000000
 384
 385 #define CONFIG_ENV_OFFSET       0x00000000      /* Offset of Environment Sector */
 386 #define CONFIG_ENV_SIZE 0x00000400      /* Total Size of Environment Space */
 387
 388 /*-----------------------------------------------------------------------
 389  * Cache Configuration
 390  */
 391 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For all MPC74xx CPUs */
 392 #if defined(CONFIG_CMD_KGDB)
 393 #define CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value */
 394 #endif
 395
 396 /*-----------------------------------------------------------------------
 397  * L2CR setup -- make sure this is right for your board!
 398  * look in include/mpc74xx.h for the defines used here
 399  */
 400 #undef CONFIG_SYS_L2
 401
 402 #define L2_INIT         0
 403 #define L2_ENABLE       (L2_INIT | L2CR_L2E)
 404 #define CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION
 405 #endif  /* __CONFIG_H */