include/configs/mv-common.h

   1 /*
   2  * (C) Copyright 2010
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 /*
  10  * This file contains Marvell Board Specific common defincations.
  11  * This file should be included in board config header file.
  12  *
  13  * It supports common definations for Kirkwood platform
  14  * TBD: support for Orion5X platforms
  15  */
  16
  17 #ifndef _MV_COMMON_H
  18 #define _MV_COMMON_H
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_MARVELL          1
  24
  25 /*
  26  * Custom CONFIG_SYS_TEXT_BASE can be done in <board>.h
  27  */
  28 #ifndef CONFIG_SYS_TEXT_BASE
  29 #define CONFIG_SYS_TEXT_BASE    0x00600000
  30 #endif /* CONFIG_SYS_TEXT_BASE */
  31
  32 /* additions for new ARM relocation support */
  33 #define CONFIG_SYS_SDRAM_BASE   0x00000000
  34
  35 /*
  36  * CLKs configurations
  37  */
  38
  39 /*
  40  * NS16550 Configuration
  41  */
  42 #define CONFIG_SYS_NS16550_SERIAL
  43 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  44 #if !defined(CONFIG_DM_SERIAL)
  45 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  46 #define CONFIG_SYS_NS16550_COM1         MV_UART_CONSOLE_BASE
  47 #endif
  48
  49 /*
  50  * Serial Port configuration
  51  * The following definitions let you select what serial you want to use
  52  * for your console driver.
  53  */
  54
  55 #define CONFIG_CONS_INDEX       1       /*Console on UART0 */
  56 #define CONFIG_BAUDRATE                 115200
  57 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, \
  58                                           115200,230400, 460800, 921600 }
  59 /* auto boot */
  60 #define CONFIG_PREBOOT
  61
  62 /*
  63  * For booting Linux, the board info and command line data
  64  * have to be in the first 8 MB of memory, since this is
  65  * the maximum mapped by the Linux kernel during initialization.
  66  */
  67 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs  */
  68 #define CONFIG_INITRD_TAG       1       /* enable INITRD tag */
  69 #define CONFIG_SETUP_MEMORY_TAGS 1      /* enable memory tag */
  70
  71 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
  72 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
  73                 +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
  74
  75 /*
  76  * Size of malloc() pool
  77  */
  78 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024 * 4) /* 4MiB for malloc() */
  79
  80 /*
  81  * Other required minimal configurations
  82  */
  83 #define CONFIG_SYS_LONGHELP
  84 #define CONFIG_AUTO_COMPLETE
  85 #define CONFIG_CMDLINE_EDITING
  86 #define CONFIG_ARCH_CPU_INIT    /* call arch_cpu_init() */
  87 #define CONFIG_ARCH_MISC_INIT   /* call arch_misc_init() */
  88 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
  89 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  90 #define CONFIG_SYS_MEMTEST_START 0x00800000     /* 8M */
  91 #define CONFIG_SYS_MEMTEST_END  0x00ffffff      /*(_16M -1) */
  92 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
  93 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
  94
  95 /* ====> Include platform Common Definitions */
  96 #include <asm/arch/config.h>
  97
  98 /*
  99  * DRAM Banks configuration, Custom config can be done in <board>.h
 100  */
 101 #ifndef CONFIG_NR_DRAM_BANKS
 102 #define CONFIG_NR_DRAM_BANKS    CONFIG_NR_DRAM_BANKS_MAX
 103 #else
 104 #if (CONFIG_NR_DRAM_BANKS > CONFIG_NR_DRAM_BANKS_MAX)
 105 #error CONFIG_NR_DRAM_BANKS Configurated more than available
 106 #endif
 107 #endif /* CONFIG_NR_DRAM_BANKS */
 108
 109 /* ====> Include driver Common Definitions */
 110 /*
 111  * Common NAND configuration
 112  */
 113 #ifdef CONFIG_CMD_NAND
 114 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 115 #endif
 116
 117 /*
 118  * Common SPI Flash configuration
 119  */
 120 #ifdef CONFIG_CMD_SF
 121 #endif
 122
 123 /*
 124  * Common USB/EHCI configuration
 125  */
 126 #if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
 127 #define CONFIG_USB_EHCI         /* Enable EHCI USB support */
 128 #define CONFIG_DOS_PARTITION
 129 #define CONFIG_ISO_PARTITION
 130 #define CONFIG_SUPPORT_VFAT
 131 #endif /* CONFIG_CMD_USB */
 132
 133 /*
 134  * File system
 135  */
 136 #ifdef CONFIG_SYS_MVFS
 137 #define CONFIG_CMD_JFFS2
 138 #define CONFIG_CMD_UBIFS
 139 #define CONFIG_RBTREE
 140 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 141 #define CONFIG_MTD_PARTITIONS
 142 #define CONFIG_CMD_MTDPARTS
 143 #define CONFIG_LZO
 144 #endif
 145
 146 #endif /* _MV_COMMON_H */