include/configs/mvebu_armada-37xx.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2016 Stefan Roese <sr@denx.de>
   4  */
   5
   6 #ifndef _CONFIG_MVEBU_ARMADA_37XX_H
   7 #define _CONFIG_MVEBU_ARMADA_37XX_H
   8
   9 /*
  10  * High Level Configuration Options (easy to change)
  11  */
  12
  13 /* additions for new ARM relocation support */
  14 #define CONFIG_SYS_SDRAM_BASE   0x00000000
  15
  16 /* auto boot */
  17
  18 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, \
  19                                           115200, 230400, 460800, 921600 }
  20
  21 /*
  22  * For booting Linux, the board info and command line data
  23  * have to be in the first 8 MB of memory, since this is
  24  * the maximum mapped by the Linux kernel during initialization.
  25  */
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
  27 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
  28 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
  29
  30 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
  31
  32 /*
  33  * Size of malloc() pool
  34  */
  35 #define CONFIG_SYS_MALLOC_LEN   (4 << 20) /* 4MiB for malloc() */
  36
  37 /*
  38  * Other required minimal configurations
  39  */
  40 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
  41 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  42 #define CONFIG_SYS_MEMTEST_START 0x00800000     /* 8M */
  43 #define CONFIG_SYS_MEMTEST_END  0x00ffffff      /*(_16M -1) */
  44 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
  45 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
  46
  47 /* End of 16M scrubbed by training in bootrom */
  48 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
  49
  50 /*
  51  * I2C
  52  */
  53 #define CONFIG_I2C_MV
  54 #define CONFIG_SYS_I2C_SLAVE            0x0
  55
  56 /*
  57  * SPI Flash configuration
  58  */
  59
  60 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
  61 #define CONFIG_MTD_PARTITIONS           /* required for UBI partition support */
  62
  63 /* Environment in SPI NOR flash */
  64 #define CONFIG_ENV_OFFSET               0x180000 /* as Marvell U-Boot version */
  65 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  66 #define CONFIG_ENV_SECT_SIZE            (64 << 10) /* 64KiB sectors */
  67
  68 /*
  69  * Ethernet Driver configuration
  70  */
  71 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
  72 #define CONFIG_ARP_TIMEOUT      200
  73 #define CONFIG_NET_RETRY_COUNT  50
  74
  75 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
  76
  77 /* USB ethernet */
  78
  79 /*
  80  * SATA/SCSI/AHCI configuration
  81  */
  82 #define CONFIG_SCSI_AHCI_PLAT
  83 #define CONFIG_LBA48
  84 #define CONFIG_SYS_64BIT_LBA
  85
  86 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     2
  87 #define CONFIG_SYS_SCSI_MAX_LUN         1
  88 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  89                                          CONFIG_SYS_SCSI_MAX_LUN)
  90
  91 #define BOOT_TARGET_DEVICES(func) \
  92         func(MMC, mmc, 1) \
  93         func(MMC, mmc, 0) \
  94         func(USB, usb, 0) \
  95         func(SCSI, scsi, 0) \
  96         func(PXE, pxe, na) \
  97         func(DHCP, dhcp, na)
  98
  99 #include <config_distro_bootcmd.h>
 100
 101 #define CONFIG_EXTRA_ENV_SETTINGS       \
 102         "scriptaddr=0x4d00000\0"        \
 103         "pxefile_addr_r=0x4e00000\0"    \
 104         "fdt_addr_r=0x4f00000\0"        \
 105         "kernel_addr_r=0x5000000\0"     \
 106         "ramdisk_addr_r=0x8000000\0"    \
 107         BOOTENV
 108
 109 #endif /* _CONFIG_MVEBU_ARMADA_37XX_H */