]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/mvebu_armada-8k.h
Convert CONFIG_SF_DEFAULT_* to Kconfig
[thirdparty/u-boot.git] / include / configs / mvebu_armada-8k.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 */
5
6 #ifndef _CONFIG_MVEBU_ARMADA_8K_H
7 #define _CONFIG_MVEBU_ARMADA_8K_H
8
9 /*
10 * High Level Configuration Options (easy to change)
11 */
12 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
13
14 /* additions for new ARM relocation support */
15 #define CONFIG_SYS_SDRAM_BASE 0x00000000
16
17 /* auto boot */
18 #define CONFIG_PREBOOT
19
20 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
21 115200, 230400, 460800, 921600 }
22
23 /*
24 * For booting Linux, the board info and command line data
25 * have to be in the first 8 MB of memory, since this is
26 * the maximum mapped by the Linux kernel during initialization.
27 */
28 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
29 #define CONFIG_INITRD_TAG /* enable INITRD tag */
30 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
31
32 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
33
34 /*
35 * Size of malloc() pool
36 */
37 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
38
39 /*
40 * Other required minimal configurations
41 */
42 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
43 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
44 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
45 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
46 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
47 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
48
49 /* End of 16M scrubbed by training in bootrom */
50 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
51
52 /*
53 * SPI Flash configuration
54 */
55 #define CONFIG_ENV_SPI_BUS 0
56 #define CONFIG_ENV_SPI_CS 0
57
58 /* SPI NOR flash default params, used by sf commands */
59 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
60
61 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
62 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
63 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
64
65 /* When runtime detection fails this is the default */
66 #define CONFIG_SYS_MMC_ENV_DEV 0
67
68 #define CONFIG_SYS_MAX_NAND_DEVICE 1
69 #define CONFIG_SYS_NAND_MAX_CHIPS 1
70 #define CONFIG_SYS_NAND_ONFI_DETECTION
71 #define CONFIG_SYS_NAND_USE_FLASH_BBT
72
73 /*
74 * Ethernet Driver configuration
75 */
76 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
77 #define CONFIG_ARP_TIMEOUT 200
78 #define CONFIG_NET_RETRY_COUNT 50
79
80 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
81
82 /* USB ethernet */
83
84 /*
85 * SATA/SCSI/AHCI configuration
86 */
87 #define CONFIG_SCSI_AHCI_PLAT
88 #define CONFIG_LBA48
89 #define CONFIG_SYS_64BIT_LBA
90
91 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
92 #define CONFIG_SYS_SCSI_MAX_LUN 1
93 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
94 CONFIG_SYS_SCSI_MAX_LUN)
95
96 /*
97 * PCI configuration
98 */
99 #ifdef CONFIG_PCIE_DW_MVEBU
100 #define CONFIG_E1000
101 #endif
102
103 #define BOOT_TARGET_DEVICES(func) \
104 func(MMC, mmc, 1) \
105 func(MMC, mmc, 0) \
106 func(USB, usb, 0) \
107 func(SCSI, scsi, 0) \
108 func(PXE, pxe, na) \
109 func(DHCP, dhcp, na)
110
111 #include <config_distro_bootcmd.h>
112
113 #define CONFIG_EXTRA_ENV_SETTINGS \
114 "scriptaddr=0x4d00000\0" \
115 "pxefile_addr_r=0x4e00000\0" \
116 "fdt_addr_r=0x4f00000\0" \
117 "kernel_addr_r=0x5000000\0" \
118 "ramdisk_addr_r=0x8000000\0" \
119 "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
120 BOOTENV
121
122 #endif /* _CONFIG_MVEBU_ARMADA_8K_H */