]>
git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/mvebu_db-88f3720.h
2 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_MVEBU_DB_88F3720_H
8 #define _CONFIG_MVEBU_DB_88F3720_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_DISPLAY_BOARDINFO_LATE
15 #define CONFIG_SYS_TEXT_BASE 0x00000000
17 /* additions for new ARM relocation support */
18 #define CONFIG_SYS_SDRAM_BASE 0x00000000
20 #define CONFIG_NR_DRAM_BANKS 1
23 #define CONFIG_PREBOOT
25 #define CONFIG_BAUDRATE 115200
26 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
27 115200, 230400, 460800, 921600 }
30 * For booting Linux, the board info and command line data
31 * have to be in the first 8 MB of memory, since this is
32 * the maximum mapped by the Linux kernel during initialization.
34 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
35 #define CONFIG_INITRD_TAG /* enable INITRD tag */
36 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
38 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
39 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
40 +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
43 * Size of malloc() pool
45 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
48 * Other required minimal configurations
50 #define CONFIG_SYS_LONGHELP
51 #define CONFIG_AUTO_COMPLETE
52 #define CONFIG_CMDLINE_EDITING
53 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
54 #define CONFIG_BOARD_EARLY_INIT_F /* call board_init_f for early inits */
55 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
56 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
57 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */
58 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
59 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */
61 #define CONFIG_SYS_ALT_MEMTEST
63 /* End of 16M scrubbed by training in bootrom */
64 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
70 #define CONFIG_SYS_I2C_SLAVE 0x0
73 * SPI Flash configuration
75 #define CONFIG_ENV_SPI_BUS 0
76 #define CONFIG_ENV_SPI_CS 0
78 /* SPI NOR flash default params, used by sf commands */
79 #define CONFIG_SF_DEFAULT_SPEED 1000000
80 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
81 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
83 /* Environment in SPI NOR flash */
84 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
85 #define CONFIG_ENV_IS_IN_SPI_FLASH
86 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */
87 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
88 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */
91 * Ethernet Driver configuration
93 #define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
94 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
95 #define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
96 #define CONFIG_ARP_TIMEOUT 200
97 #define CONFIG_NET_RETRY_COUNT 50
100 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
103 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 3
105 #define CONFIG_USB_MAX_CONTROLLER_COUNT (CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS + \
106 CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS)
109 #define CONFIG_USB_HOST_ETHER
110 #define CONFIG_USB_ETHER_ASIX
111 #define CONFIG_USB_ETHER_MCS7830
112 #define CONFIG_USB_ETHER_RTL8152
113 #define CONFIG_USB_ETHER_SMSC95XX
116 * SATA/SCSI/AHCI configuration
119 #define CONFIG_SCSI_AHCI
120 #define CONFIG_SCSI_AHCI_PLAT
121 #define CONFIG_LIBATA
123 #define CONFIG_SYS_64BIT_LBA
125 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
126 #define CONFIG_SYS_SCSI_MAX_LUN 1
127 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
128 CONFIG_SYS_SCSI_MAX_LUN)
130 #define CONFIG_SUPPORT_VFAT
132 /* DISK Partition support */
133 #define CONFIG_EFI_PARTITION
134 #define CONFIG_DOS_PARTITION
135 #define CONFIG_MAC_PARTITION
136 #define CONFIG_ISO_PARTITION /* Experimental */
138 #define CONFIG_CMD_PART
139 #define CONFIG_PARTITION_UUIDS
141 #endif /* _CONFIG_MVEBU_DB_88F3720_H */