include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 #include <asm/arch/imx-regs.h>
  30
  31  /* High Level Configuration Options */
  32 #define CONFIG_ARM1136  /* This is an arm1136 CPU core */
  33 #define CONFIG_MX35
  34 #define CONFIG_MX35_HCLK_FREQ   24000000
  35
  36 #define CONFIG_DISPLAY_CPUINFO
  37 #define CONFIG_DISPLAY_BOARDINFO
  38
  39 /* Set TEXT at the beginning of the NOR flash */
  40 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  41
  42 #define CONFIG_SYS_64BIT_VSPRINTF
  43
  44 #define CONFIG_BOARD_EARLY_INIT_F
  45 #define CONFIG_BOARD_LATE_INIT
  46
  47 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  48 #define CONFIG_REVISION_TAG
  49 #define CONFIG_SETUP_MEMORY_TAGS
  50 #define CONFIG_INITRD_TAG
  51
  52 /*
  53  * Size of malloc() pool
  54  */
  55 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  56
  57 /*
  58  * Hardware drivers
  59  */
  60 #define CONFIG_HARD_I2C
  61 #define CONFIG_I2C_MXC
  62 #define CONFIG_SYS_I2C_MX35_PORT1
  63 #define CONFIG_SYS_I2C_SPEED            100000
  64 #define CONFIG_SYS_I2C_SLAVE            0xfe
  65 #define CONFIG_MXC_SPI
  66 #define CONFIG_MXC_GPIO
  67
  68
  69 /*
  70  * PMIC Configs
  71  */
  72 #define CONFIG_PMIC
  73 #define CONFIG_PMIC_I2C
  74 #define CONFIG_PMIC_FSL
  75 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  76 #define CONFIG_RTC_MC13XXX
  77
  78 /*
  79  * MFD MC9SDZ60
  80  */
  81 #define CONFIG_FSL_MC9SDZ60
  82 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  83
  84 /*
  85  * UART (console)
  86  */
  87 #define CONFIG_MXC_UART
  88 #define CONFIG_MXC_UART_BASE    UART1_BASE
  89
  90 /* allow to overwrite serial and ethaddr */
  91 #define CONFIG_ENV_OVERWRITE
  92 #define CONFIG_CONS_INDEX       1
  93 #define CONFIG_BAUDRATE         115200
  94 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  95
  96 /*
  97  * Command definition
  98  */
  99
 100 #include <config_cmd_default.h>
 101
 102 #define CONFIG_CMD_PING
 103 #define CONFIG_CMD_DHCP
 104 #define CONFIG_BOOTP_SUBNETMASK
 105 #define CONFIG_BOOTP_GATEWAY
 106 #define CONFIG_BOOTP_DNS
 107
 108 #define CONFIG_CMD_NAND
 109
 110 #define CONFIG_CMD_I2C
 111 #define CONFIG_CMD_SPI
 112 #define CONFIG_CMD_MII
 113 #define CONFIG_CMD_NET
 114 #define CONFIG_NET_RETRY_COUNT  100
 115 #define CONFIG_CMD_DATE
 116
 117 #define CONFIG_BOOTDELAY        3
 118
 119 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
 120
 121 /*
 122  * Ethernet on the debug board (SMC911)
 123  */
 124 #define CONFIG_SMC911X
 125 #define CONFIG_SMC911X_16_BIT 1
 126 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 127
 128 #define CONFIG_HAS_ETH1
 129 #define CONFIG_ETHPRIME
 130
 131 /*
 132  * Ethernet on SOC (FEC)
 133  */
 134 #define CONFIG_FEC_MXC
 135 #define IMX_FEC_BASE    FEC_BASE_ADDR
 136 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 137
 138 #define CONFIG_MII
 139 #define CONFIG_DISCOVER_PHY
 140
 141 #define CONFIG_ARP_TIMEOUT      200UL
 142
 143 /*
 144  * Miscellaneous configurable options
 145  */
 146 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 147 #define CONFIG_SYS_PROMPT       "MX35 U-Boot > "
 148 #define CONFIG_CMDLINE_EDITING
 149 #define CONFIG_SYS_HUSH_PARSER  /* Use the HUSH parser */
 150 #define CONFIG_SYS_PROMPT_HUSH_PS2      "> "
 151
 152 #define CONFIG_AUTO_COMPLETE
 153 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 154 /* Print Buffer Size */
 155 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 156 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 157 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 158
 159 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 160 #define CONFIG_SYS_MEMTEST_END          0x10000
 161
 162 #undef  CONFIG_SYS_CLKS_IN_HZ   /* everything, incl board info, in Hz */
 163
 164 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 165
 166 #define CONFIG_SYS_HZ                           1000
 167
 168
 169 /*
 170  * Stack sizes
 171  *
 172  * The stack sizes are set up in start.S using the settings below
 173  */
 174 #define CONFIG_STACKSIZE        (128 * 1024)    /* regular stack */
 175
 176 /*
 177  * Physical Memory Map
 178  */
 179 #define CONFIG_NR_DRAM_BANKS    2
 180 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 181 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 182 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 183 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 184
 185 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 186 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 187 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 188 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 189                                         GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 191                                         CONFIG_SYS_GBL_DATA_OFFSET)
 192
 193 /*
 194  * MTD Command for mtdparts
 195  */
 196 #define CONFIG_CMD_MTDPARTS
 197 #define CONFIG_MTD_DEVICE
 198 #define CONFIG_FLASH_CFI_MTD
 199 #define CONFIG_MTD_PARTITIONS
 200 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 201 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 202                                 "96m(root),8m(cfg),1938m(user);"        \
 203                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 204
 205 /*
 206  * FLASH and environment organization
 207  */
 208 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 209 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 210 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 211 /* Monitor at beginning of flash */
 212 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 213 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 214
 215 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 216 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 217
 218 /* Address and size of Redundant Environment Sector     */
 219 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 220 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 221
 222 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 223                                 CONFIG_SYS_MONITOR_LEN)
 224
 225 #define CONFIG_ENV_IS_IN_FLASH
 226
 227 #if defined(CONFIG_FSL_ENV_IN_NAND)
 228         #define CONFIG_ENV_IS_IN_NAND
 229         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 230 #endif
 231
 232 /*
 233  * CFI FLASH driver setup
 234  */
 235 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 236 #define CONFIG_FLASH_CFI_DRIVER
 237
 238 /* A non-standard buffered write algorithm */
 239 #define CONFIG_FLASH_SPANSION_S29WS_N
 240 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 241 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 242
 243 /*
 244  * NAND FLASH driver setup
 245  */
 246 #define CONFIG_NAND_MXC
 247 #define CONFIG_NAND_MXC_V1_1
 248 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 249 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 250 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 251 #define CONFIG_MXC_NAND_HWECC
 252 #define CONFIG_SYS_NAND_LARGEPAGE
 253
 254 /*
 255  * Default environment and default scripts
 256  * to update uboot and load kernel
 257  */
 258 #define xstr(s) str(s)
 259 #define str(s)  #s
 260
 261 #define CONFIG_HOSTNAME "mx35pdk"
 262 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 263         "netdev=eth1\0"                                                 \
 264         "ethprime=smc911x\0"                                            \
 265         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 266                 "nfsroot=${serverip}:${rootpath}\0"                     \
 267         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 268         "addip_sta=setenv bootargs ${bootargs} "                        \
 269                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 270                 ":${hostname}:${netdev}:off panic=1\0"                  \
 271         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 272         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 273                 "else run addip_sta;fi\0"       \
 274         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 275         "addtty=setenv bootargs ${bootargs}"                            \
 276                 " console=ttymxc0,${baudrate}\0"                        \
 277         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 278         "loadaddr=80800000\0"                                           \
 279         "kernel_addr_r=80800000\0"                                      \
 280         "hostname=" xstr(CONFIG_HOSTNAME) "\0"                          \
 281         "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0"                   \
 282         "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0"             \
 283         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 284                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 285         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 286                 "bootm ${kernel_addr}\0"                                \
 287         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 288                 "run nfsargs addip addtty addmtd addmisc;"              \
 289                 "bootm ${kernel_addr_r}\0"                              \
 290         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 291                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 292         "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0"                 \
 293         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 294         "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0"                \
 295         "update=protect off ${uboot_addr} +40000;"                      \
 296                 "erase ${uboot_addr} +40000;"                           \
 297                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 298         "upd=if run load;then echo Updating u-boot;if run update;"      \
 299                 "then echo U-Boot updated;"                             \
 300                         "else echo Error updating u-boot !;"            \
 301                         "echo Board without bootloader !!;"             \
 302                 "fi;"                                                   \
 303                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 304         "bootcmd=run net_nfs\0"
 305
 306 #endif                          /* __CONFIG_H */