include/configs/mx35pdk.h

   1 /*
   2  * (C) Copyright 2010, Stefano Babic <sbabic@denx.de>
   3  *
   4  * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
   5  *
   6  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
   7  *
   8  * Configuration for the MX35pdk Freescale board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #include <asm/arch/imx-regs.h>
  17
  18  /* High Level Configuration Options */
  19 #define CONFIG_MX35
  20
  21 #define CONFIG_DISPLAY_CPUINFO
  22 #define CONFIG_SYS_FSL_CLK
  23
  24 /* Set TEXT at the beginning of the NOR flash */
  25 #define CONFIG_SYS_TEXT_BASE    0xA0000000
  26
  27 #define CONFIG_BOARD_EARLY_INIT_F
  28 #define CONFIG_BOARD_LATE_INIT
  29
  30 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  31 #define CONFIG_REVISION_TAG
  32 #define CONFIG_SETUP_MEMORY_TAGS
  33 #define CONFIG_INITRD_TAG
  34
  35 /*
  36  * Size of malloc() pool
  37  */
  38 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  39
  40 /*
  41  * Hardware drivers
  42  */
  43 #define CONFIG_SYS_I2C
  44 #define CONFIG_SYS_I2C_MXC
  45 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  46 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  47 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  48 #define CONFIG_MXC_SPI
  49 #define CONFIG_MXC_GPIO
  50
  51 /*
  52  * PMIC Configs
  53  */
  54 #define CONFIG_POWER
  55 #define CONFIG_POWER_I2C
  56 #define CONFIG_POWER_FSL
  57 #define CONFIG_POWER_FSL_MC13892
  58 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x08
  59 #define CONFIG_RTC_MC13XXX
  60
  61 /*
  62  * MFD MC9SDZ60
  63  */
  64 #define CONFIG_FSL_MC9SDZ60
  65 #define CONFIG_SYS_FSL_MC9SDZ60_I2C_ADDR        0x69
  66
  67 /*
  68  * UART (console)
  69  */
  70 #define CONFIG_MXC_UART
  71 #define CONFIG_MXC_UART_BASE    UART1_BASE
  72
  73 /* allow to overwrite serial and ethaddr */
  74 #define CONFIG_ENV_OVERWRITE
  75 #define CONFIG_CONS_INDEX       1
  76 #define CONFIG_BAUDRATE         115200
  77
  78 /*
  79  * Command definition
  80  */
  81 #define CONFIG_CMD_BOOTZ
  82 #define CONFIG_BOOTP_SUBNETMASK
  83 #define CONFIG_BOOTP_GATEWAY
  84 #define CONFIG_BOOTP_DNS
  85
  86 #define CONFIG_CMD_NAND
  87 #define CONFIG_CMD_CACHE
  88
  89 #define CONFIG_CMD_MII
  90 #define CONFIG_NET_RETRY_COUNT  100
  91 #define CONFIG_CMD_DATE
  92
  93 #define CONFIG_USB_STORAGE
  94 #define CONFIG_CMD_MMC
  95 #define CONFIG_DOS_PARTITION
  96 #define CONFIG_EFI_PARTITION
  97 #define CONFIG_CMD_EXT2
  98 #define CONFIG_CMD_FAT
  99
 100 #define CONFIG_BOOTDELAY        1
 101
 102 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
 103
 104 /*
 105  * Ethernet on the debug board (SMC911)
 106  */
 107 #define CONFIG_SMC911X
 108 #define CONFIG_SMC911X_16_BIT 1
 109 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 110
 111 #define CONFIG_HAS_ETH1
 112 #define CONFIG_ETHPRIME
 113
 114 /*
 115  * Ethernet on SOC (FEC)
 116  */
 117 #define CONFIG_FEC_MXC
 118 #define IMX_FEC_BASE    FEC_BASE_ADDR
 119 #define CONFIG_FEC_MXC_PHYADDR  0x1F
 120
 121 #define CONFIG_MII
 122
 123 #define CONFIG_ARP_TIMEOUT      200UL
 124
 125 /*
 126  * Miscellaneous configurable options
 127  */
 128 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 129 #define CONFIG_CMDLINE_EDITING
 130
 131 #define CONFIG_AUTO_COMPLETE
 132 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 133 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 134 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 135
 136 #define CONFIG_SYS_MEMTEST_START        0       /* memtest works on */
 137 #define CONFIG_SYS_MEMTEST_END          0x10000
 138
 139 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 140
 141 /*
 142  * Physical Memory Map
 143  */
 144 #define CONFIG_NR_DRAM_BANKS    2
 145 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 146 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 147 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 148 #define PHYS_SDRAM_2_SIZE       (128 * 1024 * 1024)
 149
 150 #define CONFIG_SYS_SDRAM_BASE           CSD0_BASE_ADDR
 151 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR + 0x10000)
 152 #define CONFIG_SYS_INIT_RAM_SIZE                (IRAM_SIZE / 2)
 153 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 154                                         GENERATED_GBL_DATA_SIZE)
 155 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 156                                         CONFIG_SYS_GBL_DATA_OFFSET)
 157
 158 /*
 159  * MTD Command for mtdparts
 160  */
 161 #define CONFIG_CMD_MTDPARTS
 162 #define CONFIG_MTD_DEVICE
 163 #define CONFIG_FLASH_CFI_MTD
 164 #define CONFIG_MTD_PARTITIONS
 165 #define MTDIDS_DEFAULT          "nand0=mxc_nand,nor0=physmap-flash.0"
 166 #define MTDPARTS_DEFAULT        "mtdparts=mxc_nand:1m(boot),5m(linux)," \
 167                                 "96m(root),8m(cfg),1938m(user);"        \
 168                                 "physmap-flash.0:512k(b),4m(k),30m(u),28m(r)"
 169
 170 /*
 171  * FLASH and environment organization
 172  */
 173 #define CONFIG_SYS_FLASH_BASE           CS0_BASE_ADDR
 174 #define CONFIG_SYS_MAX_FLASH_BANKS 1    /* max number of memory banks */
 175 #define CONFIG_SYS_MAX_FLASH_SECT 512   /* max number of sectors on one chip */
 176 /* Monitor at beginning of flash */
 177 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 178 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)
 179
 180 #define CONFIG_ENV_SECT_SIZE    (128 * 1024)
 181 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 182
 183 /* Address and size of Redundant Environment Sector     */
 184 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 185 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 186
 187 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + \
 188                                 CONFIG_SYS_MONITOR_LEN)
 189
 190 #define CONFIG_ENV_IS_IN_FLASH
 191
 192 #if defined(CONFIG_FSL_ENV_IN_NAND)
 193         #define CONFIG_ENV_IS_IN_NAND
 194         #define CONFIG_ENV_OFFSET       (1024 * 1024)
 195 #endif
 196
 197 /*
 198  * CFI FLASH driver setup
 199  */
 200 #define CONFIG_SYS_FLASH_CFI            /* Flash memory is CFI compliant */
 201 #define CONFIG_FLASH_CFI_DRIVER
 202
 203 /* A non-standard buffered write algorithm */
 204 #define CONFIG_FLASH_SPANSION_S29WS_N
 205 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       /* faster */
 206 #define CONFIG_SYS_FLASH_PROTECTION     /* Use hardware sector protection */
 207
 208 /*
 209  * NAND FLASH driver setup
 210  */
 211 #define CONFIG_NAND_MXC
 212 #define CONFIG_MXC_NAND_REGS_BASE       (NFC_BASE_ADDR)
 213 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 214 #define CONFIG_SYS_NAND_BASE            (NFC_BASE_ADDR)
 215 #define CONFIG_MXC_NAND_HWECC
 216 #define CONFIG_SYS_NAND_LARGEPAGE
 217
 218 /* EHCI driver */
 219 #define CONFIG_USB_EHCI
 220 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      1
 221 #define CONFIG_EHCI_IS_TDI
 222 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 223 #define CONFIG_USB_EHCI_MXC
 224 #define CONFIG_MXC_USB_PORT     0
 225 #define CONFIG_MXC_USB_FLAGS    (MXC_EHCI_INTERFACE_DIFF_UNI | \
 226                                  MXC_EHCI_POWER_PINS_ENABLED | \
 227                                  MXC_EHCI_OC_PIN_ACTIVE_LOW)
 228 #define CONFIG_MXC_USB_PORTSC   (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI)
 229
 230 /* mmc driver */
 231 #define CONFIG_MMC
 232 #define CONFIG_GENERIC_MMC
 233 #define CONFIG_FSL_ESDHC
 234 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 235 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 236
 237 /*
 238  * Default environment and default scripts
 239  * to update uboot and load kernel
 240  */
 241
 242 #define CONFIG_HOSTNAME "mx35pdk"
 243 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 244         "netdev=eth1\0"                                                 \
 245         "ethprime=smc911x\0"                                            \
 246         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 247                 "nfsroot=${serverip}:${rootpath}\0"                     \
 248         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 249         "addip_sta=setenv bootargs ${bootargs} "                        \
 250                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 251                 ":${hostname}:${netdev}:off panic=1\0"                  \
 252         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 253         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 254                 "else run addip_sta;fi\0"                               \
 255         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 256         "addtty=setenv bootargs ${bootargs}"                            \
 257                 " console=ttymxc0,${baudrate}\0"                        \
 258         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 259         "loadaddr=80800000\0"                                           \
 260         "kernel_addr_r=80800000\0"                                      \
 261         "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
 262         "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
 263         "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
 264         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 265                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 266         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 267                 "bootm ${kernel_addr}\0"                                \
 268         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 269                 "run nfsargs addip addtty addmtd addmisc;"              \
 270                 "bootm ${kernel_addr_r}\0"                              \
 271         "net_self_load=tftp ${kernel_addr_r} ${bootfile};"              \
 272                 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0"             \
 273         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
 274         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 275         "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
 276         "update=protect off ${uboot_addr} +80000;"                      \
 277                 "erase ${uboot_addr} +80000;"                           \
 278                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"          \
 279         "upd=if run load;then echo Updating u-boot;if run update;"      \
 280                 "then echo U-Boot updated;"                             \
 281                         "else echo Error updating u-boot !;"            \
 282                         "echo Board without bootloader !!;"             \
 283                 "fi;"                                                   \
 284                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 285         "bootcmd=run net_nfs\0"
 286
 287 #endif                          /* __CONFIG_H */