]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/mx53evk.h
8703a61556bff2d38c67ccdba23facdc0db8ea14
[thirdparty/u-boot.git] / include / configs / mx53evk.h
1 /*
2 * Copyright (C) 2010 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the MX53-EVK Freescale board.
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11
12 #define CONFIG_MACH_TYPE MACH_TYPE_MX53_EVK
13
14 #include <asm/arch/imx-regs.h>
15
16 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
17 #define CONFIG_SETUP_MEMORY_TAGS
18 #define CONFIG_INITRD_TAG
19 #define CONFIG_REVISION_TAG
20
21 #define CONFIG_SYS_FSL_CLK
22
23 /* Size of malloc() pool */
24 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
25
26 #define CONFIG_MXC_UART
27 #define CONFIG_MXC_UART_BASE UART1_BASE
28
29 /* I2C Configs */
30 #define CONFIG_SYS_I2C
31 #define CONFIG_SYS_I2C_MXC
32 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
33 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
34 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
35
36 /* PMIC Configs */
37 #define CONFIG_POWER
38 #define CONFIG_POWER_I2C
39 #define CONFIG_POWER_FSL
40 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8
41 #define CONFIG_POWER_FSL_MC13892
42 #define CONFIG_RTC_MC13XXX
43
44 /* MMC Configs */
45 #define CONFIG_FSL_ESDHC
46 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
47 #define CONFIG_SYS_FSL_ESDHC_NUM 2
48
49 /* Eth Configs */
50 #define CONFIG_MII
51
52 #define CONFIG_FEC_MXC
53 #define IMX_FEC_BASE FEC_BASE_ADDR
54 #define CONFIG_FEC_MXC_PHYADDR 0x1F
55
56 /* allow to overwrite serial and ethaddr */
57 #define CONFIG_ENV_OVERWRITE
58
59 /* Command definition */
60
61 #define CONFIG_ETHPRIME "FEC0"
62
63 #define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
64
65 #define CONFIG_EXTRA_ENV_SETTINGS \
66 "script=boot.scr\0" \
67 "uimage=uImage\0" \
68 "mmcdev=0\0" \
69 "mmcpart=2\0" \
70 "mmcroot=/dev/mmcblk0p3 rw\0" \
71 "mmcrootfstype=ext3 rootwait\0" \
72 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
73 "root=${mmcroot} " \
74 "rootfstype=${mmcrootfstype}\0" \
75 "loadbootscript=" \
76 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
77 "bootscript=echo Running bootscript from mmc ...; " \
78 "source\0" \
79 "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
80 "mmcboot=echo Booting from mmc ...; " \
81 "run mmcargs; " \
82 "bootm\0" \
83 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
84 "root=/dev/nfs " \
85 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
86 "netboot=echo Booting from net ...; " \
87 "run netargs; " \
88 "dhcp ${uimage}; bootm\0" \
89
90 #define CONFIG_BOOTCOMMAND \
91 "mmc dev ${mmcdev}; if mmc rescan; then " \
92 "if run loadbootscript; then " \
93 "run bootscript; " \
94 "else " \
95 "if run loaduimage; then " \
96 "run mmcboot; " \
97 "else run netboot; " \
98 "fi; " \
99 "fi; " \
100 "else run netboot; fi"
101
102 #define CONFIG_ARP_TIMEOUT 200UL
103
104 /* Miscellaneous configurable options */
105
106 #define CONFIG_SYS_MEMTEST_START 0x70000000
107 #define CONFIG_SYS_MEMTEST_END 0x70010000
108
109 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
110
111 /* Physical Memory Map */
112 #define CONFIG_NR_DRAM_BANKS 1
113 #define PHYS_SDRAM_1 CSD0_BASE_ADDR
114 #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
115
116 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
117 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
118 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
119
120 #define CONFIG_SYS_INIT_SP_OFFSET \
121 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
122 #define CONFIG_SYS_INIT_SP_ADDR \
123 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
124
125 /* environment organization */
126 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
127 #define CONFIG_ENV_SIZE (8 * 1024)
128 #define CONFIG_SYS_MMC_ENV_DEV 0
129
130 #endif /* __CONFIG_H */