include/configs/mx6qsabrelite.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q Sabre Lite board.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #ifndef __CONFIG_H
  23 #define __CONFIG_H
  24
  25 #define CONFIG_MX6
  26 #define CONFIG_MX6Q
  27
  28 #include "mx6_common.h"
  29
  30 #define CONFIG_DISPLAY_CPUINFO
  31 #define CONFIG_DISPLAY_BOARDINFO
  32
  33 #define CONFIG_MACH_TYPE        3769
  34
  35 #include <asm/arch/imx-regs.h>
  36 #include <asm/imx-common/gpio.h>
  37
  38 #define CONFIG_CMDLINE_TAG
  39 #define CONFIG_SETUP_MEMORY_TAGS
  40 #define CONFIG_INITRD_TAG
  41 #define CONFIG_REVISION_TAG
  42
  43 /* Size of malloc() pool */
  44 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  45
  46 #define CONFIG_BOARD_EARLY_INIT_F
  47 #define CONFIG_MISC_INIT_R
  48 #define CONFIG_MXC_GPIO
  49
  50 #define CONFIG_MXC_UART
  51 #define CONFIG_MXC_UART_BASE           UART2_BASE
  52
  53 #define CONFIG_CMD_SF
  54 #ifdef CONFIG_CMD_SF
  55 #define CONFIG_SPI_FLASH
  56 #define CONFIG_SPI_FLASH_SST
  57 #define CONFIG_MXC_SPI
  58 #define CONFIG_SF_DEFAULT_BUS  0
  59 #define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
  60 #define CONFIG_SF_DEFAULT_SPEED 25000000
  61 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  62 #endif
  63
  64 /* I2C Configs */
  65 #define CONFIG_CMD_I2C
  66 #define CONFIG_I2C_MULTI_BUS
  67 #define CONFIG_I2C_MXC
  68 #define CONFIG_SYS_I2C_SPEED            100000
  69
  70 /* MMC Configs */
  71 #define CONFIG_FSL_ESDHC
  72 #define CONFIG_FSL_USDHC
  73 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  74 #define CONFIG_SYS_FSL_USDHC_NUM       2
  75
  76 #define CONFIG_MMC
  77 #define CONFIG_CMD_MMC
  78 #define CONFIG_GENERIC_MMC
  79 #define CONFIG_BOUNCE_BUFFER
  80 #define CONFIG_CMD_EXT2
  81 #define CONFIG_CMD_FAT
  82 #define CONFIG_DOS_PARTITION
  83
  84 #define CONFIG_CMD_SATA
  85 /*
  86  * SATA Configs
  87  */
  88 #ifdef CONFIG_CMD_SATA
  89 #define CONFIG_DWC_AHSATA
  90 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  91 #define CONFIG_DWC_AHSATA_PORT_ID       0
  92 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  93 #define CONFIG_LBA48
  94 #define CONFIG_LIBATA
  95 #endif
  96
  97 #define CONFIG_CMD_PING
  98 #define CONFIG_CMD_DHCP
  99 #define CONFIG_CMD_MII
 100 #define CONFIG_CMD_NET
 101 #define CONFIG_FEC_MXC
 102 #define CONFIG_MII
 103 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 104 #define CONFIG_FEC_XCV_TYPE             RGMII
 105 #define CONFIG_ETHPRIME                 "FEC"
 106 #define CONFIG_FEC_MXC_PHYADDR          6
 107 #define CONFIG_PHYLIB
 108 #define CONFIG_PHY_MICREL
 109 #define CONFIG_PHY_MICREL_KSZ9021
 110
 111 /* USB Configs */
 112 #define CONFIG_CMD_USB
 113 #define CONFIG_CMD_FAT
 114 #define CONFIG_USB_EHCI
 115 #define CONFIG_USB_EHCI_MX6
 116 #define CONFIG_USB_STORAGE
 117 #define CONFIG_USB_HOST_ETHER
 118 #define CONFIG_USB_ETHER_ASIX
 119 #define CONFIG_USB_ETHER_SMSC95XX
 120 #define CONFIG_MXC_USB_PORT     1
 121 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
 122 #define CONFIG_MXC_USB_FLAGS    0
 123
 124 /* Miscellaneous commands */
 125 #define CONFIG_CMD_BMODE
 126
 127 /* Framebuffer and LCD */
 128 #define CONFIG_VIDEO
 129 #define CONFIG_VIDEO_IPUV3
 130 #define CONFIG_CFB_CONSOLE
 131 #define CONFIG_VGA_AS_SINGLE_DEVICE
 132 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 133 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 134 #define CONFIG_VIDEO_BMP_RLE8
 135 #define CONFIG_SPLASH_SCREEN
 136 #define CONFIG_BMP_16BPP
 137 #define CONFIG_VIDEO_LOGO
 138 #define CONFIG_IPUV3_CLK 260000000
 139
 140 /* allow to overwrite serial and ethaddr */
 141 #define CONFIG_ENV_OVERWRITE
 142 #define CONFIG_CONS_INDEX              1
 143 #define CONFIG_BAUDRATE                        115200
 144
 145 /* Command definition */
 146 #include <config_cmd_default.h>
 147
 148 #undef CONFIG_CMD_IMLS
 149
 150 #define CONFIG_BOOTDELAY               1
 151
 152 #define CONFIG_PREBOOT                 ""
 153
 154 #define CONFIG_LOADADDR                        0x12000000
 155 #define CONFIG_SYS_TEXT_BASE           0x17800000
 156
 157 #define CONFIG_EXTRA_ENV_SETTINGS \
 158         "script=boot.scr\0" \
 159         "uimage=uImage\0" \
 160         "console=ttymxc1\0" \
 161         "fdt_high=0xffffffff\0" \
 162         "initrd_high=0xffffffff\0" \
 163         "fdt_file=imx6q-sabrelite.dtb\0" \
 164         "fdt_addr=0x11000000\0" \
 165         "boot_fdt=try\0" \
 166         "ip_dyn=yes\0" \
 167         "mmcdev=0\0" \
 168         "mmcpart=2\0" \
 169         "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
 170         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 171                 "root=${mmcroot}\0" \
 172         "loadbootscript=" \
 173                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 174         "bootscript=echo Running bootscript from mmc ...; " \
 175                 "source\0" \
 176         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 177         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 178         "mmcboot=echo Booting from mmc ...; " \
 179                 "run mmcargs; " \
 180                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 181                         "if run loadfdt; then " \
 182                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 183                         "else " \
 184                                 "if test ${boot_fdt} = try; then " \
 185                                         "bootm; " \
 186                                 "else " \
 187                                         "echo WARN: Cannot load the DT; " \
 188                                 "fi; " \
 189                         "fi; " \
 190                 "else " \
 191                         "bootm; " \
 192                 "fi;\0" \
 193         "netargs=setenv bootargs console=${console},${baudrate} " \
 194                 "root=/dev/nfs " \
 195         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 196                 "netboot=echo Booting from net ...; " \
 197                 "run netargs; " \
 198                 "if test ${ip_dyn} = yes; then " \
 199                         "setenv get_cmd dhcp; " \
 200                 "else " \
 201                         "setenv get_cmd tftp; " \
 202                 "fi; " \
 203                 "${get_cmd} ${uimage}; " \
 204                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 205                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 206                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 207                         "else " \
 208                                 "if test ${boot_fdt} = try; then " \
 209                                         "bootm; " \
 210                                 "else " \
 211                                         "echo WARN: Cannot load the DT; " \
 212                                 "fi; " \
 213                         "fi; " \
 214                 "else " \
 215                         "bootm; " \
 216                 "fi;\0"
 217
 218 #define CONFIG_BOOTCOMMAND \
 219            "mmc dev ${mmcdev};" \
 220            "mmc dev ${mmcdev}; if mmc rescan; then " \
 221                    "if run loadbootscript; then " \
 222                            "run bootscript; " \
 223                    "else " \
 224                            "if run loaduimage; then " \
 225                                    "run mmcboot; " \
 226                            "else run netboot; " \
 227                            "fi; " \
 228                    "fi; " \
 229            "else run netboot; fi"
 230
 231 #define CONFIG_ARP_TIMEOUT     200UL
 232
 233 /* Miscellaneous configurable options */
 234 #define CONFIG_SYS_LONGHELP
 235 #define CONFIG_SYS_HUSH_PARSER
 236 #define CONFIG_SYS_PROMPT              "MX6QSABRELITE U-Boot > "
 237 #define CONFIG_AUTO_COMPLETE
 238 #define CONFIG_SYS_CBSIZE              256
 239
 240 /* Print Buffer Size */
 241 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 242 #define CONFIG_SYS_MAXARGS             16
 243 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 244
 245 #define CONFIG_SYS_MEMTEST_START       0x10000000
 246 #define CONFIG_SYS_MEMTEST_END         0x10010000
 247 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 248
 249 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 250 #define CONFIG_SYS_HZ                  1000
 251
 252 #define CONFIG_CMDLINE_EDITING
 253
 254 /* Physical Memory Map */
 255 #define CONFIG_NR_DRAM_BANKS           1
 256 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 257 #define PHYS_SDRAM_SIZE                        (1u * 1024 * 1024 * 1024)
 258
 259 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 260 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 261 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 262
 263 #define CONFIG_SYS_INIT_SP_OFFSET \
 264        (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 265 #define CONFIG_SYS_INIT_SP_ADDR \
 266        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 267
 268 /* FLASH and environment organization */
 269 #define CONFIG_SYS_NO_FLASH
 270
 271 #define CONFIG_ENV_SIZE                 (8 * 1024)
 272
 273 #define CONFIG_ENV_IS_IN_MMC
 274 /* #define CONFIG_ENV_IS_IN_SPI_FLASH */
 275
 276 #if defined(CONFIG_ENV_IS_IN_MMC)
 277 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 278 #define CONFIG_SYS_MMC_ENV_DEV          0
 279 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 280 #define CONFIG_ENV_OFFSET               (768 * 1024)
 281 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 282 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 283 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 284 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 285 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 286 #endif
 287
 288 #define CONFIG_OF_LIBFDT
 289 #define CONFIG_CMD_BOOTZ
 290
 291 #ifndef CONFIG_SYS_DCACHE_OFF
 292 #define CONFIG_CMD_CACHE
 293 #endif
 294
 295 #endif                         /* __CONFIG_H */