include/configs/mx6sabresd.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6SABRESD_CONFIG_H
  10 #define __MX6SABRESD_CONFIG_H
  11
  12 #ifdef CONFIG_SPL
  13 #include "imx6_spl.h"
  14 #endif
  15
  16 #define CONFIG_MACH_TYPE        3980
  17 #define CONFIG_MXC_UART_BASE    UART1_BASE
  18 #define CONSOLE_DEV             "ttymxc0"
  19
  20 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  21
  22 #include "mx6sabre_common.h"
  23
  24 /* Falcon Mode */
  25 #define CONFIG_SPL_FS_LOAD_ARGS_NAME    "args"
  26 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME  "uImage"
  27 #define CONFIG_CMD_SPL
  28 #define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
  29 #define CONFIG_CMD_SPL_WRITE_SIZE      (128 * SZ_1K)
  30
  31 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
  32 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
  33 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
  34 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
  35
  36 #define CONFIG_SYS_FSL_USDHC_NUM        3
  37 #if defined(CONFIG_ENV_IS_IN_MMC)
  38 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC3 */
  39 #endif
  40
  41 #ifdef CONFIG_CMD_PCI
  42 #define CONFIG_PCI_SCAN_SHOW
  43 #define CONFIG_PCIE_IMX
  44 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  45 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(3, 19)
  46 #endif
  47
  48 /* I2C Configs */
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  54 #define CONFIG_SYS_I2C_SPEED              100000
  55
  56 /* PMIC */
  57 #define CONFIG_POWER
  58 #define CONFIG_POWER_I2C
  59 #define CONFIG_POWER_PFUZE100
  60 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  61
  62 /* USB Configs */
  63 #ifdef CONFIG_CMD_USB
  64 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  65 #define CONFIG_USB_HOST_ETHER
  66 #define CONFIG_USB_ETHER_ASIX
  67 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  68 #define CONFIG_MXC_USB_FLAGS            0
  69 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
  70 #endif
  71
  72 #endif                         /* __MX6SABRESD_CONFIG_H */