include/configs/mx6slevk.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6SL EVK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define MACH_TYPE_MX6SLEVK              4307
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_MX6SLEVK
  16
  17 #define CONFIG_CMDLINE_TAG
  18 #define CONFIG_SETUP_MEMORY_TAGS
  19 #define CONFIG_INITRD_TAG
  20 #define CONFIG_REVISION_TAG
  21
  22 /* Size of malloc() pool */
  23 #define CONFIG_SYS_MALLOC_LEN           (3 * SZ_1M)
  24
  25 #define CONFIG_BOARD_EARLY_INIT_F
  26 #define CONFIG_MXC_GPIO
  27
  28 #define CONFIG_MXC_UART
  29 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  30
  31 /* MMC Configs */
  32 #define CONFIG_FSL_ESDHC
  33 #define CONFIG_FSL_USDHC
  34 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  35
  36 #define CONFIG_MMC
  37 #define CONFIG_CMD_MMC
  38 #define CONFIG_GENERIC_MMC
  39 #define CONFIG_CMD_FAT
  40 #define CONFIG_DOS_PARTITION
  41
  42 /* I2C Configs */
  43 #define CONFIG_CMD_I2C
  44 #define CONFIG_SYS_I2C
  45 #define CONFIG_SYS_I2C_MXC
  46 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  47 #define CONFIG_SYS_I2C_SPEED              100000
  48
  49 /* PMIC */
  50 #define CONFIG_POWER
  51 #define CONFIG_POWER_I2C
  52 #define CONFIG_POWER_PFUZE100
  53 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  54
  55 #define CONFIG_CMD_PING
  56 #define CONFIG_CMD_DHCP
  57 #define CONFIG_CMD_MII
  58 #define CONFIG_CMD_NET
  59 #define CONFIG_FEC_MXC
  60 #define CONFIG_MII
  61 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  62 #define CONFIG_FEC_XCV_TYPE             RMII
  63 #define CONFIG_ETHPRIME                 "FEC"
  64 #define CONFIG_FEC_MXC_PHYADDR          0
  65
  66 #define CONFIG_PHYLIB
  67 #define CONFIG_PHY_SMSC
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71 #define CONFIG_CONS_INDEX               1
  72 #define CONFIG_BAUDRATE                 115200
  73
  74 /* Command definition */
  75
  76 #define CONFIG_BOOTDELAY                3
  77
  78 #define CONFIG_LOADADDR                 0x82000000
  79 #define CONFIG_SYS_TEXT_BASE            0x87800000
  80
  81 #define CONFIG_EXTRA_ENV_SETTINGS \
  82         "script=boot.scr\0" \
  83         "image=zImage\0" \
  84         "console=ttymxc0\0" \
  85         "fdt_high=0xffffffff\0" \
  86         "initrd_high=0xffffffff\0" \
  87         "fdt_file=imx6sl-evk.dtb\0" \
  88         "fdt_addr=0x88000000\0" \
  89         "boot_fdt=try\0" \
  90         "ip_dyn=yes\0" \
  91         "mmcdev=1\0" \
  92         "mmcpart=1\0" \
  93         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  94         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  95                 "root=${mmcroot}\0" \
  96         "loadbootscript=" \
  97                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  98         "bootscript=echo Running bootscript from mmc ...; " \
  99                 "source\0" \
 100         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 101         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 102         "mmcboot=echo Booting from mmc ...; " \
 103                 "run mmcargs; " \
 104                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 105                         "if run loadfdt; then " \
 106                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 107                         "else " \
 108                                 "if test ${boot_fdt} = try; then " \
 109                                         "bootz; " \
 110                                 "else " \
 111                                         "echo WARN: Cannot load the DT; " \
 112                                 "fi; " \
 113                         "fi; " \
 114                 "else " \
 115                         "bootz; " \
 116                 "fi;\0" \
 117         "netargs=setenv bootargs console=${console},${baudrate} " \
 118                 "root=/dev/nfs " \
 119         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 120                 "netboot=echo Booting from net ...; " \
 121                 "run netargs; " \
 122                 "if test ${ip_dyn} = yes; then " \
 123                         "setenv get_cmd dhcp; " \
 124                 "else " \
 125                         "setenv get_cmd tftp; " \
 126                 "fi; " \
 127                 "${get_cmd} ${image}; " \
 128                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 129                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 130                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 131                         "else " \
 132                                 "if test ${boot_fdt} = try; then " \
 133                                         "bootz; " \
 134                                 "else " \
 135                                         "echo WARN: Cannot load the DT; " \
 136                                 "fi; " \
 137                         "fi; " \
 138                 "else " \
 139                         "bootz; " \
 140                 "fi;\0"
 141
 142 #define CONFIG_BOOTCOMMAND \
 143            "mmc dev ${mmcdev};" \
 144            "mmc dev ${mmcdev}; if mmc rescan; then " \
 145                    "if run loadbootscript; then " \
 146                            "run bootscript; " \
 147                    "else " \
 148                            "if run loadimage; then " \
 149                                    "run mmcboot; " \
 150                            "else run netboot; " \
 151                            "fi; " \
 152                    "fi; " \
 153            "else run netboot; fi"
 154
 155 /* Miscellaneous configurable options */
 156 #define CONFIG_SYS_LONGHELP
 157 #define CONFIG_SYS_HUSH_PARSER
 158 #define CONFIG_AUTO_COMPLETE
 159 #define CONFIG_SYS_CBSIZE               256
 160
 161 #define CONFIG_SYS_MAXARGS              16
 162 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 163
 164 #define CONFIG_SYS_MEMTEST_START        0x80000000
 165 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_512M)
 166
 167 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 168
 169 #define CONFIG_CMDLINE_EDITING
 170 #define CONFIG_STACKSIZE                SZ_128K
 171
 172 /* Physical Memory Map */
 173 #define CONFIG_NR_DRAM_BANKS            1
 174 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 175 #define PHYS_SDRAM_SIZE                 SZ_1G
 176
 177 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 178 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 179 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 180
 181 #define CONFIG_SYS_INIT_SP_OFFSET \
 182         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 183 #define CONFIG_SYS_INIT_SP_ADDR \
 184         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 185
 186 /* Environment organization */
 187 #define CONFIG_ENV_SIZE                 SZ_8K
 188
 189 #if defined CONFIG_SYS_BOOT_SPINOR
 190 #define CONFIG_ENV_IS_IN_SPI_FLASH
 191 #define CONFIG_ENV_OFFSET               (768 * 1024)
 192 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 193 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 194 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 195 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 196 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 197 #else
 198 #define CONFIG_ENV_OFFSET               (8 * SZ_64K)
 199 #define CONFIG_ENV_IS_IN_MMC
 200 #endif
 201
 202 #define CONFIG_OF_LIBFDT
 203 #define CONFIG_CMD_BOOTZ
 204
 205 #ifndef CONFIG_SYS_DCACHE_OFF
 206 #define CONFIG_CMD_CACHE
 207 #endif
 208
 209 #define CONFIG_CMD_SF
 210 #ifdef CONFIG_CMD_SF
 211 #define CONFIG_SPI_FLASH
 212 #define CONFIG_SPI_FLASH_STMICRO
 213 #define CONFIG_MXC_SPI
 214 #define CONFIG_SF_DEFAULT_BUS           0
 215 #define CONFIG_SF_DEFAULT_CS            0
 216 #define CONFIG_SF_DEFAULT_SPEED         20000000
 217 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 218 #endif
 219
 220 /* USB Configs */
 221 #define CONFIG_CMD_USB
 222 #ifdef CONFIG_CMD_USB
 223 #define CONFIG_USB_EHCI
 224 #define CONFIG_USB_EHCI_MX6
 225 #define CONFIG_USB_STORAGE
 226 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 227 #define CONFIG_USB_HOST_ETHER
 228 #define CONFIG_USB_ETHER_ASIX
 229 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 230 #define CONFIG_MXC_USB_FLAGS            0
 231 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 232 #endif
 233
 234 #define CONFIG_SYS_FSL_USDHC_NUM        3
 235 #if defined(CONFIG_ENV_IS_IN_MMC)
 236 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC2*/
 237 #endif
 238
 239 #define CONFIG_IMX6_THERMAL
 240
 241 #define CONFIG_CMD_FUSE
 242 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
 243 #define CONFIG_MXC_OCOTP
 244 #endif
 245
 246 #endif                          /* __CONFIG_H */