include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define CONFIG_DBG_MONITOR
  14 #define PHYS_SDRAM_SIZE                 SZ_1G
  15
  16 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  20
  21 /* Network */
  22 #define CONFIG_FEC_MXC
  23 #define CONFIG_FEC_XCV_TYPE             RGMII
  24 #define CONFIG_ETHPRIME                 "FEC"
  25 #define CONFIG_FEC_MXC_PHYADDR          0
  26
  27 #define CONFIG_PHY_BROADCOM
  28 /* ENET1 */
  29 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  30
  31 /* MMC Config*/
  32 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  33
  34 #undef CONFIG_BOOTM_NETBSD
  35 #undef CONFIG_BOOTM_PLAN9
  36 #undef CONFIG_BOOTM_RTEMS
  37
  38 /* I2C configs */
  39 #define CONFIG_SYS_I2C_MXC
  40 #define CONFIG_SYS_I2C_SPEED            100000
  41
  42 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  43 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  44
  45 #ifdef CONFIG_IMX_BOOTAUX
  46 /* Set to QSPI1 A flash at default */
  47 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  48
  49 #define UPDATE_M4_ENV \
  50         "m4image=m4_qspi.bin\0" \
  51         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  52         "update_m4_from_sd=" \
  53                 "if sf probe 0:0; then " \
  54                         "if run loadm4image; then " \
  55                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  56                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  57                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  58                                 "sf erase 0x0 ${fw_sz}; " \
  59                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  60                         "fi; " \
  61                 "fi\0" \
  62         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  63 #else
  64 #define UPDATE_M4_ENV ""
  65 #endif
  66
  67 #define CONFIG_MFG_ENV_SETTINGS \
  68         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  69                 "rdinit=/linuxrc " \
  70                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  71                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  72                 "g_mass_storage.iSerialNumber=\"\" "\
  73                 "clk_ignore_unused "\
  74                 "\0" \
  75         "initrd_addr=0x83800000\0" \
  76         "initrd_high=0xffffffff\0" \
  77         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  78
  79 #define CONFIG_DFU_ENV_SETTINGS \
  80         "dfu_alt_info=image raw 0 0x800000;"\
  81                 "u-boot raw 0 0x4000;"\
  82                 "bootimg part 0 1;"\
  83                 "rootfs part 0 2\0" \
  84
  85 #define CONFIG_EXTRA_ENV_SETTINGS \
  86         UPDATE_M4_ENV \
  87         CONFIG_MFG_ENV_SETTINGS \
  88         CONFIG_DFU_ENV_SETTINGS \
  89         "script=boot.scr\0" \
  90         "image=zImage\0" \
  91         "console=ttymxc0\0" \
  92         "fdt_high=0xffffffff\0" \
  93         "initrd_high=0xffffffff\0" \
  94         "fdt_file=imx7d-sdb.dtb\0" \
  95         "fdt_addr=0x83000000\0" \
  96         "boot_fdt=try\0" \
  97         "ip_dyn=yes\0" \
  98         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
  99         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 100         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 101         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 102         "mmcautodetect=yes\0" \
 103         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 104                 "root=${mmcroot}\0" \
 105         "loadbootscript=" \
 106                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 107         "bootscript=echo Running bootscript from mmc ...; " \
 108                 "source\0" \
 109         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 110         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 111         "mmcboot=echo Booting from mmc ...; " \
 112                 "run mmcargs; " \
 113                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 114                         "if run loadfdt; then " \
 115                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 116                         "else " \
 117                                 "if test ${boot_fdt} = try; then " \
 118                                         "bootz; " \
 119                                 "else " \
 120                                         "echo WARN: Cannot load the DT; " \
 121                                 "fi; " \
 122                         "fi; " \
 123                 "else " \
 124                         "bootz; " \
 125                 "fi;\0" \
 126         "netargs=setenv bootargs console=${console},${baudrate} " \
 127                 "root=/dev/nfs " \
 128         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 129                 "netboot=echo Booting from net ...; " \
 130                 "run netargs; " \
 131                 "if test ${ip_dyn} = yes; then " \
 132                         "setenv get_cmd dhcp; " \
 133                 "else " \
 134                         "setenv get_cmd tftp; " \
 135                 "fi; " \
 136                 "${get_cmd} ${image}; " \
 137                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 138                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 139                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 140                         "else " \
 141                                 "if test ${boot_fdt} = try; then " \
 142                                         "bootz; " \
 143                                 "else " \
 144                                         "echo WARN: Cannot load the DT; " \
 145                                 "fi; " \
 146                         "fi; " \
 147                 "else " \
 148                         "bootz; " \
 149                 "fi;\0"
 150
 151 #define CONFIG_BOOTCOMMAND \
 152            "mmc dev ${mmcdev};" \
 153            "mmc dev ${mmcdev}; if mmc rescan; then " \
 154                    "if run loadbootscript; then " \
 155                            "run bootscript; " \
 156                    "else " \
 157                            "if run loadimage; then " \
 158                                    "run mmcboot; " \
 159                            "else run netboot; " \
 160                            "fi; " \
 161                    "fi; " \
 162            "else run netboot; fi"
 163
 164 #define CONFIG_SYS_MEMTEST_START        0x80000000
 165 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 166
 167 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 168 #define CONFIG_SYS_HZ                   1000
 169
 170 /* Physical Memory Map */
 171 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 172
 173 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 174 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 175 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 176
 177 #define CONFIG_SYS_INIT_SP_OFFSET \
 178         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 179 #define CONFIG_SYS_INIT_SP_ADDR \
 180         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 181
 182 /* environment organization */
 183 #define CONFIG_ENV_SIZE                 SZ_8K
 184
 185 /*
 186  * If want to use nand, define CONFIG_NAND_MXS and rework board
 187  * to support nand, since emmc has pin conflicts with nand
 188  */
 189 #ifdef CONFIG_NAND_MXS
 190 /* NAND stuff */
 191 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 192 #define CONFIG_SYS_NAND_BASE            0x40000000
 193 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 194 #define CONFIG_SYS_NAND_ONFI_DETECTION
 195
 196 /* DMA stuff, needed for GPMI/MXS NAND support */
 197 #endif
 198
 199 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
 200 #ifdef CONFIG_NAND_MXS
 201 #define CONFIG_SYS_FSL_USDHC_NUM        1
 202 #else
 203 #define CONFIG_SYS_FSL_USDHC_NUM        2
 204 #endif
 205
 206 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 207 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 208 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 209
 210 /* USB Configs */
 211 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 212
 213 #define CONFIG_IMX_THERMAL
 214
 215 #define CONFIG_USBD_HS
 216
 217 #ifdef CONFIG_VIDEO
 218 #define CONFIG_VIDEO_MXS
 219 #define CONFIG_VIDEO_LOGO
 220 #define CONFIG_SPLASH_SCREEN
 221 #define CONFIG_SPLASH_SCREEN_ALIGN
 222 #define CONFIG_BMP_16BPP
 223 #define CONFIG_VIDEO_BMP_RLE8
 224 #define CONFIG_VIDEO_BMP_LOGO
 225 #endif
 226
 227 #ifdef CONFIG_FSL_QSPI
 228 #define CONFIG_SPI_FLASH
 229 #define CONFIG_SPI_FLASH_MACRONIX
 230 #define CONFIG_SPI_FLASH_BAR
 231 #define CONFIG_SF_DEFAULT_BUS           0
 232 #define CONFIG_SF_DEFAULT_CS            0
 233 #define CONFIG_SF_DEFAULT_SPEED         40000000
 234 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 235 #define FSL_QSPI_FLASH_NUM              1
 236 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 237 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 238 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 239 #endif
 240
 241 #endif  /* __CONFIG_H */