include/configs/mx7dsabresd.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   4  *
   5  * Configuration settings for the Freescale i.MX7D SABRESD board.
   6  */
   7
   8 #ifndef __MX7D_SABRESD_CONFIG_H
   9 #define __MX7D_SABRESD_CONFIG_H
  10
  11 #include "mx7_common.h"
  12
  13 #define CONFIG_DBG_MONITOR
  14 #define PHYS_SDRAM_SIZE                 SZ_1G
  15
  16 #define CONFIG_MXC_UART_BASE            UART1_IPS_BASE_ADDR
  17
  18 /* Size of malloc() pool */
  19 #define CONFIG_SYS_MALLOC_LEN           (32 * SZ_1M)
  20
  21 /* Network */
  22 #define CONFIG_FEC_MXC
  23 #define CONFIG_MII
  24 #define CONFIG_FEC_XCV_TYPE             RGMII
  25 #define CONFIG_ETHPRIME                 "FEC"
  26 #define CONFIG_FEC_MXC_PHYADDR          0
  27
  28 #define CONFIG_PHY_BROADCOM
  29 /* ENET1 */
  30 #define IMX_FEC_BASE                    ENET_IPS_BASE_ADDR
  31
  32 /* MMC Config*/
  33 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  34
  35 #undef CONFIG_BOOTM_NETBSD
  36 #undef CONFIG_BOOTM_PLAN9
  37 #undef CONFIG_BOOTM_RTEMS
  38
  39 /* I2C configs */
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_SPEED            100000
  42
  43 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  44 #define CONFIG_SYS_MMC_IMG_LOAD_PART    1
  45
  46 #ifdef CONFIG_IMX_BOOTAUX
  47 /* Set to QSPI1 A flash at default */
  48 #define CONFIG_SYS_AUXCORE_BOOTDATA 0x60000000
  49
  50 #define UPDATE_M4_ENV \
  51         "m4image=m4_qspi.bin\0" \
  52         "loadm4image=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${m4image}\0" \
  53         "update_m4_from_sd=" \
  54                 "if sf probe 0:0; then " \
  55                         "if run loadm4image; then " \
  56                                 "setexpr fw_sz ${filesize} + 0xffff; " \
  57                                 "setexpr fw_sz ${fw_sz} / 0x10000; "    \
  58                                 "setexpr fw_sz ${fw_sz} * 0x10000; "    \
  59                                 "sf erase 0x0 ${fw_sz}; " \
  60                                 "sf write ${loadaddr} 0x0 ${filesize}; " \
  61                         "fi; " \
  62                 "fi\0" \
  63         "m4boot=sf probe 0:0; bootaux "__stringify(CONFIG_SYS_AUXCORE_BOOTDATA)"\0"
  64 #else
  65 #define UPDATE_M4_ENV ""
  66 #endif
  67
  68 #define CONFIG_MFG_ENV_SETTINGS \
  69         "mfgtool_args=setenv bootargs console=${console},${baudrate} " \
  70                 "rdinit=/linuxrc " \
  71                 "g_mass_storage.stall=0 g_mass_storage.removable=1 " \
  72                 "g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
  73                 "g_mass_storage.iSerialNumber=\"\" "\
  74                 "clk_ignore_unused "\
  75                 "\0" \
  76         "initrd_addr=0x83800000\0" \
  77         "initrd_high=0xffffffff\0" \
  78         "bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \
  79
  80 #define CONFIG_DFU_ENV_SETTINGS \
  81         "dfu_alt_info=image raw 0 0x800000;"\
  82                 "u-boot raw 0 0x4000;"\
  83                 "bootimg part 0 1;"\
  84                 "rootfs part 0 2\0" \
  85
  86 #define CONFIG_EXTRA_ENV_SETTINGS \
  87         UPDATE_M4_ENV \
  88         CONFIG_MFG_ENV_SETTINGS \
  89         CONFIG_DFU_ENV_SETTINGS \
  90         "script=boot.scr\0" \
  91         "image=zImage\0" \
  92         "console=ttymxc0\0" \
  93         "fdt_high=0xffffffff\0" \
  94         "initrd_high=0xffffffff\0" \
  95         "fdt_file=imx7d-sdb.dtb\0" \
  96         "fdt_addr=0x83000000\0" \
  97         "boot_fdt=try\0" \
  98         "ip_dyn=yes\0" \
  99         "videomode=video=ctfb:x:480,y:272,depth:24,pclk:108695,le:8,ri:4,up:2,lo:4,hs:41,vs:10,sync:0,vmode:0\0" \
 100         "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
 101         "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 102         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 103         "mmcautodetect=yes\0" \
 104         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 105                 "root=${mmcroot}\0" \
 106         "loadbootscript=" \
 107                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 108         "bootscript=echo Running bootscript from mmc ...; " \
 109                 "source\0" \
 110         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 111         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 112         "mmcboot=echo Booting from mmc ...; " \
 113                 "run mmcargs; " \
 114                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 115                         "if run loadfdt; then " \
 116                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 117                         "else " \
 118                                 "if test ${boot_fdt} = try; then " \
 119                                         "bootz; " \
 120                                 "else " \
 121                                         "echo WARN: Cannot load the DT; " \
 122                                 "fi; " \
 123                         "fi; " \
 124                 "else " \
 125                         "bootz; " \
 126                 "fi;\0" \
 127         "netargs=setenv bootargs console=${console},${baudrate} " \
 128                 "root=/dev/nfs " \
 129         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 130                 "netboot=echo Booting from net ...; " \
 131                 "run netargs; " \
 132                 "if test ${ip_dyn} = yes; then " \
 133                         "setenv get_cmd dhcp; " \
 134                 "else " \
 135                         "setenv get_cmd tftp; " \
 136                 "fi; " \
 137                 "${get_cmd} ${image}; " \
 138                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 139                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 140                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 141                         "else " \
 142                                 "if test ${boot_fdt} = try; then " \
 143                                         "bootz; " \
 144                                 "else " \
 145                                         "echo WARN: Cannot load the DT; " \
 146                                 "fi; " \
 147                         "fi; " \
 148                 "else " \
 149                         "bootz; " \
 150                 "fi;\0"
 151
 152 #define CONFIG_BOOTCOMMAND \
 153            "mmc dev ${mmcdev};" \
 154            "mmc dev ${mmcdev}; if mmc rescan; then " \
 155                    "if run loadbootscript; then " \
 156                            "run bootscript; " \
 157                    "else " \
 158                            "if run loadimage; then " \
 159                                    "run mmcboot; " \
 160                            "else run netboot; " \
 161                            "fi; " \
 162                    "fi; " \
 163            "else run netboot; fi"
 164
 165 #define CONFIG_SYS_MEMTEST_START        0x80000000
 166 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 0x20000000)
 167
 168 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 169 #define CONFIG_SYS_HZ                   1000
 170
 171 /* Physical Memory Map */
 172 #define CONFIG_NR_DRAM_BANKS            1
 173 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 174
 175 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 176 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 177 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 178
 179 #define CONFIG_SYS_INIT_SP_OFFSET \
 180         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 181 #define CONFIG_SYS_INIT_SP_ADDR \
 182         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 183
 184 /* environment organization */
 185 #define CONFIG_ENV_SIZE                 SZ_8K
 186
 187 /*
 188  * If want to use nand, define CONFIG_NAND_MXS and rework board
 189  * to support nand, since emmc has pin conflicts with nand
 190  */
 191 #ifdef CONFIG_NAND_MXS
 192 /* NAND stuff */
 193 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 194 #define CONFIG_SYS_NAND_BASE            0x40000000
 195 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 196 #define CONFIG_SYS_NAND_ONFI_DETECTION
 197
 198 /* DMA stuff, needed for GPMI/MXS NAND support */
 199 #endif
 200
 201 #define CONFIG_ENV_OFFSET               (12 * SZ_64K)
 202 #ifdef CONFIG_NAND_MXS
 203 #define CONFIG_SYS_FSL_USDHC_NUM        1
 204 #else
 205 #define CONFIG_SYS_FSL_USDHC_NUM        2
 206 #endif
 207
 208 #define CONFIG_SYS_MMC_ENV_DEV          0   /* USDHC1 */
 209 #define CONFIG_SYS_MMC_ENV_PART         0       /* user area */
 210 #define CONFIG_MMCROOT                  "/dev/mmcblk0p2"  /* USDHC1 */
 211
 212 /* USB Configs */
 213 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 214
 215 #define CONFIG_IMX_THERMAL
 216
 217 #define CONFIG_USBD_HS
 218
 219 #ifdef CONFIG_VIDEO
 220 #define CONFIG_VIDEO_MXS
 221 #define CONFIG_VIDEO_LOGO
 222 #define CONFIG_SPLASH_SCREEN
 223 #define CONFIG_SPLASH_SCREEN_ALIGN
 224 #define CONFIG_BMP_16BPP
 225 #define CONFIG_VIDEO_BMP_RLE8
 226 #define CONFIG_VIDEO_BMP_LOGO
 227 #endif
 228
 229 #ifdef CONFIG_FSL_QSPI
 230 #define CONFIG_SPI_FLASH
 231 #define CONFIG_SPI_FLASH_MACRONIX
 232 #define CONFIG_SPI_FLASH_BAR
 233 #define CONFIG_SF_DEFAULT_BUS           0
 234 #define CONFIG_SF_DEFAULT_CS            0
 235 #define CONFIG_SF_DEFAULT_SPEED         40000000
 236 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
 237 #define FSL_QSPI_FLASH_NUM              1
 238 #define FSL_QSPI_FLASH_SIZE             SZ_64M
 239 #define QSPI0_BASE_ADDR                 QSPI1_IPS_BASE_ADDR
 240 #define QSPI0_AMBA_BASE                 QSPI0_ARB_BASE_ADDR
 241 #endif
 242
 243 #endif  /* __CONFIG_H */