include/configs/o3dnt.h

   1 /*
   2  * (C) Copyright 2012
   3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   4  *
   5  * This program is free software; you can redistribute it and/or
   6  * modify it under the terms of the GNU General Public License as
   7  * published by the Free Software Foundation; either version 2 of
   8  * the License, or (at your option) any later version.
   9  */
  10
  11 /*
  12  * Valid values for CONFIG_SYS_TEXT_BASE are:
  13  * 0xFC000000   boot low boot high (standard configuration)
  14  * 0x00100000   boot from RAM (for testing only)
  15  */
  16 #ifndef CONFIG_SYS_TEXT_BASE
  17 #define CONFIG_SYS_TEXT_BASE    0xfc000000      /* Standard: boot low */
  18 #endif
  19
  20 /* Board specific flash config */
  21 #define CONFIG_SYS_FLASH_BASE           0xfc000000
  22 #define CONFIG_SYS_FLASH_SIZE           0x04000000      /* maximum 64MB */
  23 /* max number of sectors on one chip */
  24 #define CONFIG_SYS_MAX_FLASH_SECT       512
  25
  26 /*
  27  * Include common defines for all ifm boards
  28  */
  29 #include "o2dnt-common.h"
  30
  31 /* Additional commands */
  32 #define CONFIG_CMD_BSP
  33 #define CONFIG_CMD_REGINFO
  34
  35 /*
  36  * GPIO configuration:
  37  * no CAN + no PCI
  38  */
  39 #define CONFIG_SYS_GPS_PORT_CONFIG      0x0000A000
  40
  41 /* Other board specific configs */
  42 #define CONFIG_SYS_BOOTCS_CFG           0x00057d01
  43 #define CONFIG_SYS_RESET_ADDRESS        0xfc000000
  44
  45 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
  46 #define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM */
  47
  48 #define CONFIG_BOARD_NAME               "o3dnt"
  49 #define CONFIG_BOARD_BOOTCMD            "run flash_self"
  50 #define CONFIG_BOARD_MEM_LIMIT          xstr(62)
  51 #define BOARD_POST_CRC32_END            xstr(0x01000000)
  52
  53 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  54         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
  55         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
  56         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
  57         "linbot=fc060000\0"                                             \
  58         "lintop=fc15ffff\0"                                             \
  59         "rambot=fc160000\0"                                             \
  60         "ramtop=fc55ffff\0"                                             \
  61         "jffbot=fc560000\0"                                             \
  62         "jfftop=fce5ffff\0"                                             \
  63         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
  64         "ubotop=fc03ffff\0"                                             \
  65         "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"    \
  66         "calbot=fce60000\0"                                             \
  67         "caltop=fcffffff\0"                                             \
  68         "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"     \
  69                 "cp.b ${fileaddr} ${calbot} ${filesize}\0"              \
  70         "kernel_addr=0xfc060000\0"                                      \
  71         "ramdisk_addr=0xfc160000\0"                                     \
  72         "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};"           \
  73                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"