include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #define CONFIG_NR_DRAM_BANKS            2
  14 #define CONFIG_NAND
  15
  16 #include <configs/ti_omap3_common.h>
  17 #include <asm/mach-types.h>
  18
  19 /*
  20  * We are only ever GP parts and will utilize all of the "downloaded image"
  21  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  22  */
  23 #undef CONFIG_SPL_TEXT_BASE
  24 #define CONFIG_SPL_TEXT_BASE            0x40200000
  25
  26 /*
  27  * Display CPU and Board information
  28  */
  29 #define CONFIG_DISPLAY_BOARDINFO        1
  30
  31 #define CONFIG_MISC_INIT_R
  32
  33 #define CONFIG_REVISION_TAG             1
  34
  35 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
  36 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
  37 #define CONFIG_STATUS_LED
  38 #define CONFIG_BOARD_SPECIFIC_LED
  39 #define CONFIG_GPIO_LED
  40 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  41 #define RED_LED_GPIO 27
  42 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  43 #define RED_LED_GPIO 16
  44 #else
  45 #error "status LED not defined for this machine."
  46 #endif
  47 #define RED_LED_DEV                     0
  48 #define STATUS_LED_BIT                  RED_LED_GPIO
  49 #define STATUS_LED_STATE                STATUS_LED_ON
  50 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  51 #define STATUS_LED_BOOT                 RED_LED_DEV
  52 #endif
  53
  54 /* GPIO banks */
  55 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  56 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  57 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  58
  59 /* USB */
  60 #define CONFIG_USB_MUSB_UDC             1
  61 #define CONFIG_USB_OMAP3                1
  62 #define CONFIG_TWL4030_USB              1
  63
  64 /* USB device configuration */
  65 #define CONFIG_USB_DEVICE               1
  66 #define CONFIG_USB_TTY                  1
  67 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  68
  69 /* Change these to suit your needs */
  70 #define CONFIG_USBD_VENDORID            0x0451
  71 #define CONFIG_USBD_PRODUCTID           0x5678
  72 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  73 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  74
  75 #define CONFIG_CMD_MTDPARTS
  76 #define CONFIG_CMD_ONENAND
  77
  78 #ifndef CONFIG_SPL_BUILD
  79
  80 /* Environment */
  81 #define ENV_DEVICE_SETTINGS \
  82         "stdin=serial\0" \
  83         "stdout=serial\0" \
  84         "stderr=serial\0"
  85
  86 #define MEM_LAYOUT_SETTINGS \
  87         DEFAULT_LINUX_BOOT_ENV \
  88         "scriptaddr=0x87E00000\0" \
  89         "pxefile_addr_r=0x87F00000\0"
  90
  91 #define BOOT_TARGET_DEVICES(func) \
  92         func(MMC, mmc, 0)
  93
  94 #include <config_distro_bootcmd.h>
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS \
  97         ENV_DEVICE_SETTINGS \
  98         MEM_LAYOUT_SETTINGS \
  99         BOOTENV
 100
 101 #endif
 102
 103 /*
 104  * SMSC911x Ethernet
 105  */
 106 #if defined(CONFIG_CMD_NET)
 107 #define CONFIG_SMC911X
 108 #define CONFIG_SMC911X_32_BIT
 109 #define CONFIG_SMC911X_BASE             0x2C000000
 110 #endif /* (CONFIG_CMD_NET) */
 111
 112 #define CONFIG_RBTREE
 113 #define CONFIG_MTD_PARTITIONS
 114 #define CONFIG_SYS_MTDPARTS_RUNTIME
 115
 116 /* OneNAND config */
 117 #define CONFIG_USE_ONENAND_BOARD_INIT
 118 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 119 #define CONFIG_SYS_ONENAND_BLOCK_SIZE   (128*1024)
 120
 121 /* NAND config */
 122 #define CONFIG_SPL_OMAP3_ID_NAND
 123 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 124 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 125 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 126 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 127 #define CONFIG_SYS_NAND_OOBSIZE         64
 128 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 130 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, \
 131                                          10, 11, 12, 13, 14, 15, 16, 17, \
 132                                          18, 19, 20, 21, 22, 23, 24, 25, \
 133                                          26, 27, 28, 29, 30, 31, 32, 33, \
 134                                          34, 35, 36, 37, 38, 39, 40, 41, \
 135                                          42, 43, 44, 45, 46, 47, 48, 49, \
 136                                          50, 51, 52, 53, 54, 55, 56, 57, }
 137 #define CONFIG_SYS_NAND_ECCSIZE         512
 138 #define CONFIG_SYS_NAND_ECCBYTES        14
 139 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 140 #define CONFIG_NAND_OMAP_GPMC
 141 #define CONFIG_BCH
 142
 143 /* UBI configuration */
 144 #define CONFIG_SPL_UBI                  1
 145 #define CONFIG_SPL_UBI_MAX_VOL_LEBS     256
 146 #define CONFIG_SPL_UBI_MAX_PEB_SIZE     (256*1024)
 147 #define CONFIG_SPL_UBI_MAX_PEBS         4096
 148 #define CONFIG_SPL_UBI_VOL_IDS          8
 149 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID  0
 150 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID   3
 151 #define CONFIG_SPL_UBI_LOAD_ARGS_ID     4
 152 #define CONFIG_SPL_UBI_PEB_OFFSET       4
 153 #define CONFIG_SPL_UBI_VID_OFFSET       512
 154 #define CONFIG_SPL_UBI_LEB_START        2048
 155 #define CONFIG_SPL_UBI_INFO_ADDR        0x88080000
 156
 157 /* environment organization */
 158 #define CONFIG_ENV_IS_IN_UBI            1
 159 #define CONFIG_ENV_UBI_PART             "UBI"
 160 #define CONFIG_ENV_UBI_VOLUME           "config"
 161 #define CONFIG_ENV_UBI_VOLUME_REDUND    "config_r"
 162 #define CONFIG_UBI_SILENCE_MSG          1
 163 #define CONFIG_UBIFS_SILENCE_MSG        1
 164 #define CONFIG_ENV_SIZE                 (32*1024)
 165
 166 #endif /* __IGEP00X0_H */