include/configs/omap3_zoom1.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  * Nishanth Menon <nm@ti.com>
   7  *
   8  * Configuration settings for the TI OMAP3430 Zoom MDK board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_OMAP3_ZOOM1      1       /* working with Zoom MDK Rev1 */
  20 #define CONFIG_SYS_GENERIC_BOARD
  21
  22 #define CONFIG_NAND
  23 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  24 #include <asm/arch/cpu.h>               /* get chip and board defs */
  25 #include <asm/arch/omap3.h>
  26 #include <configs/ti_omap3_common.h>
  27
  28 /* Remove SPL boot option - we do not support that on LDP yet */
  29 #undef CONFIG_SPL
  30 #undef CONFIG_SPL_FRAMEWORK
  31 #undef CONFIG_SPL_OS_BOOT
  32
  33 /* Generic NAND definition conflicts with debug_base */
  34 #undef CONFIG_SYS_NAND_BASE
  35
  36 /*
  37  * Display CPU and Board information
  38  */
  39 #define CONFIG_DISPLAY_CPUINFO          1
  40 #define CONFIG_DISPLAY_BOARDINFO        1
  41
  42 #define CONFIG_MISC_INIT_R
  43
  44 #define CONFIG_REVISION_TAG             1
  45
  46 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  47
  48 /*
  49  * Hardware drivers
  50  */
  51
  52 /* USB */
  53 #define CONFIG_MUSB_UDC                 1
  54 #define CONFIG_USB_OMAP3                1
  55 #define CONFIG_TWL4030_USB              1
  56
  57 /* USB device configuration */
  58 #define CONFIG_USB_DEVICE               1
  59 #define CONFIG_USB_TTY                  1
  60 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  61 /* Change these to suit your needs */
  62 #define CONFIG_USBD_VENDORID            0x0451
  63 #define CONFIG_USBD_PRODUCTID           0x5678
  64 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  65 #define CONFIG_USBD_PRODUCT_NAME        "Zoom1"
  66
  67 #define MTDIDS_DEFAULT                  "nand0=nand"
  68 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  69                                         "1920k(u-boot),128k(u-boot-env),"\
  70                                         "4m(kernel),-(fs)"
  71
  72 #if defined(CONFIG_CMD_NAND)
  73 /* NAND: SPL falcon mode configs */
  74 #ifdef CONFIG_SPL_OS_BOOT
  75 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
  76 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
  77 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
  78 #endif
  79 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
  80 #endif
  81
  82 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
  83 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
  84 #undef CONFIG_CMD_IMI           /* iminfo                       */
  85 #undef CONFIG_CMD_IMLS          /* List all found images        */
  86 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
  87 #define CONFIG_CMD_NFS          /* NFS support                  */
  88 #define CONFIG_CMD_PING
  89 #define CONFIG_CMD_DHCP
  90
  91 #undef CONFIG_SYS_I2C_OMAP24XX
  92 #define CONFIG_SYS_I2C_OMAP34XX
  93
  94 /*
  95  * TWL4030
  96  */
  97 #define CONFIG_TWL4030_LED              1
  98
  99 /*
 100  * Board NAND Info.
 101  */
 102 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 103                                                         /* to access nand */
 104 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 105                                                         /* to access nand at */
 106                                                         /* CS0 */
 107 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
 108
 109 /* Environment information */
 110
 111 #define CONFIG_EXTRA_ENV_SETTINGS \
 112         "loadaddr=0x82000000\0" \
 113         "fdtaddr=0x80f80000\0" \
 114         "bootfile=uImage\0" \
 115         "fdtfile=omap3-ldp.dtb\0" \
 116         "bootdir=/\0" \
 117         "bootpart=0:1\0" \
 118         "usbtty=cdc_acm\0" \
 119         "console=ttyO2,115200n8\0" \
 120         "mmcdev=0\0" \
 121         "videomode=1024x768@60,vxres=1024,vyres=768\0" \
 122         "videospec=omapfb:vram:2M,vram:4M\0" \
 123         "mmcargs=setenv bootargs console=${console} " \
 124                 "video=${videospec},mode:${videomode} " \
 125                 "root=/dev/mmcblk0p2 rw " \
 126                 "rootfstype=ext3 rootwait\0" \
 127         "nandargs=setenv bootargs console=${console} " \
 128                 "video=${videospec},mode:${videomode} " \
 129                 "root=/dev/mtdblock4 rw " \
 130                 "rootfstype=jffs2\0" \
 131         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 132         "bootscript=echo Running bootscript from mmc ...; " \
 133                 "source ${loadaddr}\0" \
 134         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 135         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 136         "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
 137         "mmcboot=echo Booting from mmc ...; " \
 138                 "run mmcargs; " \
 139                 "bootm ${loadaddr}\0" \
 140         "mmczboot=echo Booting from mmc ...; " \
 141                 "run mmcargs; " \
 142                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 143         "nandboot=echo Booting from nand ...; " \
 144                 "run nandargs; " \
 145                 "nand read ${loadaddr} 280000 400000; " \
 146                 "bootm ${loadaddr}\0" \
 147
 148 #define CONFIG_BOOTCOMMAND \
 149         "mmc dev ${mmcdev}; if mmc rescan; then " \
 150                 "if run loadbootscript; then " \
 151                         "run bootscript; " \
 152                 "else " \
 153                         "if run loadimage; then " \
 154                                 "run mmcboot; " \
 155                         "else if run loadzimage; then " \
 156                                 "run mmczboot; " \
 157                         "else run nandboot; " \
 158                         "fi; fi;" \
 159                 "fi; " \
 160         "else run nandboot; fi"
 161
 162 /*
 163  * Miscellaneous configurable options
 164  */
 165 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1)  /* memtest */
 166 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_2 + \
 167                                         0x01F00000) /* 31MB */
 168
 169 /*-----------------------------------------------------------------------
 170  * FLASH and environment organization
 171  */
 172
 173 /* **** PISMO SUPPORT *** */
 174 #if defined(CONFIG_CMD_NAND)
 175 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 176 #endif
 177
 178 /* Monitor at start of flash */
 179 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 180 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 181
 182 #define CONFIG_ENV_IS_IN_NAND           1
 183 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 184 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 185
 186 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 187 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 188 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 189
 190 #define CONFIG_SYS_CACHELINE_SIZE       64
 191
 192 #ifdef CONFIG_CMD_NET
 193 /* Ethernet (LAN9211 from SMSC9118 family) */
 194 #define CONFIG_SMC911X
 195 #define CONFIG_SMC911X_32_BIT
 196 #define CONFIG_SMC911X_BASE             DEBUG_BASE
 197
 198 #endif
 199
 200 #endif                          /* __CONFIG_H */