include/configs/omapl138_lcdk.h

   1 /*
   2  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * Based on davinci_dvevm.h. Original Copyrights follow:
   5  *
   6  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0
   9  */
  10
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * Board
  16  */
  17 #define CONFIG_DRIVER_TI_EMAC
  18 #undef CONFIG_USE_SPIFLASH
  19 #undef  CONFIG_SYS_USE_NOR
  20 #define CONFIG_USE_NAND
  21
  22 /*
  23  * SoC Configuration
  24  */
  25 #define CONFIG_MACH_OMAPL138_LCDK
  26 #define CONFIG_ARM926EJS                /* arm926ejs CPU core */
  27 #define CONFIG_SYS_CLK_FREQ             clk_get(DAVINCI_ARM_CLKID)
  28 #define CONFIG_SYS_OSCIN_FREQ           24000000
  29 #define CONFIG_SYS_TIMERBASE            DAVINCI_TIMER0_BASE
  30 #define CONFIG_SYS_HZ_CLOCK             clk_get(DAVINCI_AUXCLK_CLKID)
  31 #define CONFIG_SYS_HZ                   1000
  32 #define CONFIG_SKIP_LOWLEVEL_INIT
  33 #define CONFIG_SYS_TEXT_BASE            0xc1080000
  34
  35 /*
  36  * Memory Info
  37  */
  38 #define CONFIG_SYS_MALLOC_LEN   (0x10000 + 1*1024*1024) /* malloc() len */
  39 #define PHYS_SDRAM_1            DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
  40 #define PHYS_SDRAM_1_SIZE       (128 << 20) /* SDRAM size 128MB */
  41 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
  42
  43 /* memtest start addr */
  44 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + 0x2000000)
  45
  46 /* memtest will be run on 16MB */
  47 #define CONFIG_SYS_MEMTEST_END  (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
  48
  49 #define CONFIG_NR_DRAM_BANKS    1 /* we have 1 bank of DRAM */
  50
  51 #define CONFIG_SYS_DA850_SYSCFG_SUSPSRC (       \
  52         DAVINCI_SYSCFG_SUSPSRC_TIMER0 |         \
  53         DAVINCI_SYSCFG_SUSPSRC_SPI1 |           \
  54         DAVINCI_SYSCFG_SUSPSRC_UART2 |          \
  55         DAVINCI_SYSCFG_SUSPSRC_EMAC |           \
  56         DAVINCI_SYSCFG_SUSPSRC_I2C)
  57
  58 /*
  59  * PLL configuration
  60  */
  61
  62 #define CONFIG_SYS_DA850_PLL0_PLLM     37
  63 #define CONFIG_SYS_DA850_PLL1_PLLM     21
  64
  65 /*
  66  * DDR2 memory configuration
  67  */
  68 #define CONFIG_SYS_DA850_DDR2_DDRPHYCR (DV_DDR_PHY_PWRDNEN | \
  69                                         DV_DDR_PHY_EXT_STRBEN | \
  70                                         (0x5 << DV_DDR_PHY_RD_LATENCY_SHIFT))
  71
  72 #define CONFIG_SYS_DA850_DDR2_SDBCR (             \
  73         (1 << DV_DDR_SDCR_DDR2EN_SHIFT)         | \
  74         (1 << DV_DDR_SDCR_DDREN_SHIFT)          | \
  75         (1 << DV_DDR_SDCR_SDRAMEN_SHIFT)        | \
  76         (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT)      | \
  77         (4 << DV_DDR_SDCR_CL_SHIFT)             | \
  78         (3 << DV_DDR_SDCR_IBANK_SHIFT)          | \
  79         (2 << DV_DDR_SDCR_PAGESIZE_SHIFT))
  80
  81 /* SDBCR2 is only used if IBANK_POS bit in SDBCR is set */
  82 #define CONFIG_SYS_DA850_DDR2_SDBCR2 0
  83
  84 #define CONFIG_SYS_DA850_DDR2_SDTIMR (            \
  85         (19 << DV_DDR_SDTMR1_RFC_SHIFT)         | \
  86         (1 << DV_DDR_SDTMR1_RP_SHIFT)           | \
  87         (1 << DV_DDR_SDTMR1_RCD_SHIFT)          | \
  88         (2 << DV_DDR_SDTMR1_WR_SHIFT)           | \
  89         (6 << DV_DDR_SDTMR1_RAS_SHIFT)          | \
  90         (8 << DV_DDR_SDTMR1_RC_SHIFT)           | \
  91         (1 << DV_DDR_SDTMR1_RRD_SHIFT)          | \
  92         (1 << DV_DDR_SDTMR1_WTR_SHIFT))
  93
  94 #define CONFIG_SYS_DA850_DDR2_SDTIMR2 (           \
  95         (7 << DV_DDR_SDTMR2_RASMAX_SHIFT)       | \
  96         (2 << DV_DDR_SDTMR2_XP_SHIFT)           | \
  97         (0 << DV_DDR_SDTMR2_ODT_SHIFT)          | \
  98         (20 << DV_DDR_SDTMR2_XSNR_SHIFT)        | \
  99         (199 << DV_DDR_SDTMR2_XSRD_SHIFT)       | \
 100         (1 << DV_DDR_SDTMR2_RTP_SHIFT)          | \
 101         (2 << DV_DDR_SDTMR2_CKE_SHIFT))
 102
 103 #define CONFIG_SYS_DA850_DDR2_SDRCR    0x00000492
 104 #define CONFIG_SYS_DA850_DDR2_PBBPR    0x30
 105
 106 /*
 107  * Serial Driver info
 108  */
 109 #define CONFIG_SYS_NS16550_SERIAL
 110 #define CONFIG_SYS_NS16550_REG_SIZE     -4      /* NS16550 register size */
 111 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
 112 #define CONFIG_SYS_NS16550_CLK  clk_get(DAVINCI_UART2_CLKID)
 113 #define CONFIG_CONS_INDEX       1               /* use UART0 for console */
 114 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
 115
 116 #define CONFIG_SPI
 117 #define CONFIG_SYS_SPI_BASE             DAVINCI_SPI1_BASE
 118 #define CONFIG_SYS_SPI_CLK              clk_get(DAVINCI_SPI1_CLKID)
 119 #define CONFIG_SF_DEFAULT_SPEED         30000000
 120 #define CONFIG_ENV_SPI_MAX_HZ   CONFIG_SF_DEFAULT_SPEED
 121
 122 #ifdef CONFIG_USE_SPIFLASH
 123 #define CONFIG_SPL_SPI_LOAD
 124 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8000
 125 #define CONFIG_SYS_SPI_U_BOOT_SIZE      0x30000
 126 #endif
 127
 128 /*
 129  * I2C Configuration
 130  */
 131 #define CONFIG_SYS_I2C
 132 #define CONFIG_SYS_I2C_DAVINCI
 133 #define CONFIG_SYS_DAVINCI_I2C_SPEED    25000
 134 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    10 /* Bogus, master-only in U-Boot */
 135 #define CONFIG_SYS_I2C_EXPANDER_ADDR    0x20
 136
 137 /*
 138  * Flash & Environment
 139  */
 140 #ifdef CONFIG_USE_NAND
 141 #define CONFIG_NAND_DAVINCI
 142 #define CONFIG_ENV_OFFSET               0x0 /* Block 0--not used by bootcode */
 143 #define CONFIG_ENV_SIZE                 (128 << 9)
 144 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 145 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 146 #define CONFIG_SYS_NAND_PAGE_2K
 147 #define CONFIG_SYS_NAND_CS              3
 148 #define CONFIG_SYS_NAND_BASE            DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
 149 #define CONFIG_SYS_NAND_MASK_CLE        0x10
 150 #define CONFIG_SYS_NAND_MASK_ALE        0x8
 151 #undef CONFIG_SYS_NAND_HW_ECC
 152 #define CONFIG_SYS_MAX_NAND_DEVICE      1 /* Max number of NAND devices */
 153 #define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
 154 #define CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC
 155 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 156 #define CONFIG_SYS_NAND_PAGE_SIZE       (2 << 10)
 157 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 << 10)
 158 #define CONFIG_SYS_NAND_U_BOOT_SIZE     SZ_512K
 159 #define CONFIG_SYS_NAND_U_BOOT_DST      0xc1080000
 160 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 161 #define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_DST - \
 162                                         CONFIG_SYS_NAND_U_BOOT_SIZE - \
 163                                         CONFIG_SYS_MALLOC_LEN -       \
 164                                         GENERATED_GBL_DATA_SIZE)
 165 #define CONFIG_SYS_NAND_ECCPOS          {                               \
 166                                 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,     \
 167                                 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, \
 168                                 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, \
 169                                 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }
 170 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 171 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 172 #define CONFIG_SYS_NAND_ECCSIZE         512
 173 #define CONFIG_SYS_NAND_ECCBYTES        10
 174 #define CONFIG_SYS_NAND_OOBSIZE         64
 175 #define CONFIG_SPL_NAND_BASE
 176 #define CONFIG_SPL_NAND_DRIVERS
 177 #define CONFIG_SPL_NAND_ECC
 178 #define CONFIG_SPL_NAND_LOAD
 179 #endif
 180
 181 #ifdef CONFIG_SYS_USE_NOR
 182 #define CONFIG_FLASH_CFI_DRIVER
 183 #define CONFIG_SYS_FLASH_CFI
 184 #define CONFIG_SYS_FLASH_PROTECTION
 185 #define CONFIG_SYS_MAX_FLASH_BANKS      1 /* max number of flash banks */
 186 #define CONFIG_SYS_FLASH_SECT_SZ        (128 << 10) /* 128KB */
 187 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_FLASH_SECT_SZ * 3)
 188 #define CONFIG_ENV_SIZE                 (128 << 10)
 189 #define CONFIG_SYS_FLASH_BASE           DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
 190 #define PHYS_FLASH_SIZE                 (8 << 20) /* Flash size 8MB */
 191 #define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
 192                + 3)
 193 #define CONFIG_ENV_SECT_SIZE            CONFIG_SYS_FLASH_SECT_SZ
 194 #endif
 195
 196 #ifdef CONFIG_USE_SPIFLASH
 197 #define CONFIG_ENV_SIZE                 (64 << 10)
 198 #define CONFIG_ENV_OFFSET               (256 << 10)
 199 #define CONFIG_ENV_SECT_SIZE            (64 << 10)
 200 #endif
 201
 202 /*
 203  * Network & Ethernet Configuration
 204  */
 205 #ifdef CONFIG_DRIVER_TI_EMAC
 206 #define CONFIG_MII
 207 #undef  CONFIG_DRIVER_TI_EMAC_USE_RMII
 208 #define CONFIG_BOOTP_DEFAULT
 209 #define CONFIG_BOOTP_DNS
 210 #define CONFIG_BOOTP_DNS2
 211 #define CONFIG_BOOTP_SEND_HOSTNAME
 212 #define CONFIG_NET_RETRY_COUNT  10
 213 #endif
 214
 215 /*
 216  * U-Boot general configuration
 217  */
 218 #define CONFIG_MISC_INIT_R
 219 #define CONFIG_BOOTFILE         "zImage" /* Boot file name */
 220 #define CONFIG_SYS_CBSIZE       1024 /* Console I/O Buffer Size */
 221 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
 222 #define CONFIG_SYS_LOAD_ADDR    (PHYS_SDRAM_1 + 0x700000)
 223 #define CONFIG_AUTO_COMPLETE
 224 #define CONFIG_CMDLINE_EDITING
 225 #define CONFIG_SYS_LONGHELP
 226 #define CONFIG_MX_CYCLIC
 227
 228 /*
 229  * Linux Information
 230  */
 231 #define LINUX_BOOT_PARAM_ADDR   (PHYS_SDRAM_1 + 0x100)
 232 #define CONFIG_CMDLINE_TAG
 233 #define CONFIG_REVISION_TAG
 234 #define CONFIG_SETUP_MEMORY_TAGS
 235 #define CONFIG_BOOTCOMMAND \
 236                 "run envboot; " \
 237                 "run mmcboot; "
 238
 239 #define DEFAULT_LINUX_BOOT_ENV \
 240         "loadaddr=0xc0700000\0" \
 241         "fdtaddr=0xc0600000\0" \
 242         "scriptaddr=0xc0600000\0"
 243
 244 #include <environment/ti/mmc.h>
 245
 246 #define CONFIG_EXTRA_ENV_SETTINGS \
 247         DEFAULT_LINUX_BOOT_ENV \
 248         DEFAULT_MMC_TI_ARGS \
 249         "bootpart=0:2\0" \
 250         "bootdir=/boot\0" \
 251         "bootfile=zImage\0" \
 252         "fdtfile=da850-lcdk.dtb\0" \
 253         "boot_fdt=yes\0" \
 254         "boot_fit=0\0" \
 255         "console=ttyS2,115200n8\0"
 256
 257 #ifdef CONFIG_CMD_BDI
 258 #define CONFIG_CLOCKS
 259 #endif
 260
 261 #ifndef CONFIG_DRIVER_TI_EMAC
 262 #endif
 263
 264 #ifdef CONFIG_USE_NAND
 265 #define CONFIG_MTD_DEVICE
 266 #define CONFIG_MTD_PARTITIONS
 267 #endif
 268
 269 #if !defined(CONFIG_USE_NAND) && \
 270         !defined(CONFIG_SYS_USE_NOR) && \
 271         !defined(CONFIG_USE_SPIFLASH)
 272 #define CONFIG_ENV_SIZE         (16 << 10)
 273 #endif
 274
 275 /* SD/MMC */
 276
 277 #ifdef CONFIG_ENV_IS_IN_MMC
 278 #undef CONFIG_ENV_SIZE
 279 #undef CONFIG_ENV_OFFSET
 280 #define CONFIG_ENV_SIZE         (16 << 10)      /* 16 KiB */
 281 #define CONFIG_ENV_OFFSET       (51 << 9)       /* Sector 51 */
 282 #endif
 283
 284 #ifndef CONFIG_DIRECT_NOR_BOOT
 285 /* defines for SPL */
 286 #define CONFIG_SPL_FRAMEWORK
 287 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE - \
 288                                                 CONFIG_SYS_MALLOC_LEN)
 289 #define CONFIG_SYS_SPL_MALLOC_SIZE      CONFIG_SYS_MALLOC_LEN
 290 #define CONFIG_SPL_STACK        0x8001ff00
 291 #define CONFIG_SPL_TEXT_BASE    0x80000000
 292 #define CONFIG_SPL_MAX_FOOTPRINT        32768
 293 #define CONFIG_SPL_PAD_TO       32768
 294 #endif
 295
 296 /* additions for new relocation code, must added to all boards */
 297 #define CONFIG_SYS_SDRAM_BASE           0xc0000000
 298 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 299                                         GENERATED_GBL_DATA_SIZE)
 300
 301 #include <asm/arch/hardware.h>
 302
 303 #endif /* __CONFIG_H */