include/configs/openrd_base.h

   1 /*
   2  * (C) Copyright 2009
   3  * Net Insight <www.netinsight.net>
   4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
   5  *
   6  * Based on sheevaplug.h:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  27  * MA 02110-1301 USA
  28  */
  29
  30 #ifndef _CONFIG_OPENRD_BASE_H
  31 #define _CONFIG_OPENRD_BASE_H
  32
  33 /*
  34  * Version number information
  35  */
  36 #define CONFIG_IDENT_STRING     "\nOpenRD_base"
  37
  38 /*
  39  * High Level Configuration Options (easy to change)
  40  */
  41 #define CONFIG_MARVELL          1
  42 #define CONFIG_ARM926EJS        1       /* Basic Architecture */
  43 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  44 #define CONFIG_KIRKWOOD         1       /* SOC Family Name */
  45 #define CONFIG_KW88F6281        1       /* SOC Name */
  46 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
  47
  48 #define CONFIG_MD5      /* get_random_hex on krikwood needs MD5 support */
  49 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  50 #define CONFIG_KIRKWOOD_EGIGA_INIT      /* Enable GbePort0/1 for kernel */
  51 #define CONFIG_KIRKWOOD_RGMII_PAD_1V8   /* Set RGMII Pad voltage to 1.8V */
  52 #define CONFIG_KIRKWOOD_PCIE_INIT       /* Enable PCIE Port0 for kernel */
  53
  54 /*
  55  * CLKs configurations
  56  */
  57 #define CONFIG_SYS_HZ           1000
  58
  59 /*
  60  * NS16550 Configuration
  61  */
  62 #define CONFIG_SYS_NS16550
  63 #define CONFIG_SYS_NS16550_SERIAL
  64 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  65 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  66 #define CONFIG_SYS_NS16550_COM1         KW_UART0_BASE
  67
  68 /*
  69  * Serial Port configuration
  70  * The following definitions let you select what serial you want to use
  71  * for your console driver.
  72  */
  73
  74 #define CONFIG_CONS_INDEX       1       /*Console on UART0 */
  75 #define CONFIG_BAUDRATE                 115200
  76 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, \
  77                                           115200,230400, 460800, 921600 }
  78 /* auto boot */
  79 #define CONFIG_BOOTDELAY        3       /* default enable autoboot */
  80
  81 /*
  82  * For booting Linux, the board info and command line data
  83  * have to be in the first 8 MB of memory, since this is
  84  * the maximum mapped by the Linux kernel during initialization.
  85  */
  86 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs  */
  87 #define CONFIG_INITRD_TAG       1       /* enable INITRD tag */
  88 #define CONFIG_SETUP_MEMORY_TAGS 1      /* enable memory tag */
  89
  90 #define CONFIG_SYS_PROMPT       "Marvell>> "    /* Command Prompt */
  91 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
  92 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE \
  93                 +sizeof(CONFIG_SYS_PROMPT) + 16)        /* Print Buff */
  94 /*
  95  * Commands configuration
  96  */
  97 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  98 #include <config_cmd_default.h>
  99 #define CONFIG_CMD_AUTOSCRIPT
 100 #define CONFIG_CMD_DHCP
 101 #define CONFIG_CMD_ENV
 102 #define CONFIG_CMD_FAT
 103 #define CONFIG_CMD_NAND
 104 #define CONFIG_CMD_MII
 105 #define CONFIG_CMD_PING
 106 #define CONFIG_CMD_USB
 107
 108 /*
 109  * NAND configuration
 110  */
 111 #ifdef CONFIG_CMD_NAND
 112 #define CONFIG_NAND_KIRKWOOD
 113 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 114 #define NAND_MAX_CHIPS                  1
 115 #define CONFIG_SYS_NAND_BASE            0xD8000000      /* KW_DEFADR_NANDF */
 116 #define NAND_ALLOW_ERASE_ALL            1
 117 #endif
 118
 119 /*
 120  *  Environment variables configurations
 121  */
 122 #ifdef CONFIG_CMD_NAND
 123 #define CONFIG_ENV_IS_IN_NAND           1
 124 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
 125 #else
 126 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
 127 #endif
 128 /*
 129  * max 4k env size is enough, but in case of nand
 130  * it has to be rounded to sector size
 131  */
 132 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
 133 #define CONFIG_ENV_ADDR                 0x60000
 134 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
 135
 136 /*
 137  * Default environment variables
 138  */
 139 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
 140         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
 141         "${x_bootcmd_usb}; bootm 0x6400000;"
 142
 143 #define MTDIDS_DEFAULT          "nand0=nand_mtd"
 144 #define MTDPARTS_DEFAULT        "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
 145         "0x400000@0x100000(uImage),"\
 146         "0x1fb00000@0x500000(rootfs)"
 147
 148 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"            \
 149         "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
 150         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
 151         "x_bootcmd_usb=usb start\0"                                     \
 152         "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
 153         "mtdids="MTDIDS_DEFAULT"\0"                                     \
 154         "mtdparts="MTDPARTS_DEFAULT"\0"
 155
 156 /*
 157  * Size of malloc() pool
 158  */
 159 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024) /* 1MiB for malloc() */
 160 /* size in bytes reserved for initial data */
 161 #define CONFIG_SYS_GBL_DATA_SIZE        128
 162
 163 /*
 164  * Other required minimal configurations
 165  */
 166 #define CONFIG_SYS_LONGHELP
 167 #define CONFIG_AUTO_COMPLETE
 168 #define CONFIG_CMDLINE_EDITING
 169 #define CONFIG_ARCH_CPU_INIT    /* call arch_cpu_init() */
 170 #define CONFIG_ARCH_MISC_INIT   /* call arch_misc_init() */
 171 #define CONFIG_DISPLAY_CPUINFO  /* Display cpu info */
 172 #define CONFIG_NR_DRAM_BANKS    4
 173 #define CONFIG_STACKSIZE        0x00100000      /* regular stack- 1M */
 174 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
 175 #define CONFIG_SYS_MEMTEST_START 0x00400000     /* 4M */
 176 #define CONFIG_SYS_MEMTEST_END  0x007fffff      /*(_8M -1) */
 177 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
 178 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 179
 180 /*
 181  * Ethernet Driver configuration
 182  */
 183 #ifdef CONFIG_CMD_NET
 184 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 185 #define CONFIG_NET_MULTI        /* specify more that one ports available */
 186 #define CONFIG_MII              /* expose smi ove miiphy interface */
 187 #define CONFIG_KIRKWOOD_EGIGA   /* Enable kirkwood Gbe Controller Driver */
 188 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 189 #define CONFIG_KIRKWOOD_EGIGA_PORTS     {1,0}   /* enable port 0 only */
 190 #define CONFIG_PHY_BASE_ADR     0x8
 191 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 192 #define CONFIG_RESET_PHY_R      /* use reset_phy() to init mv8831116 PHY */
 193 #endif /* CONFIG_CMD_NET */
 194
 195 /*
 196  * USB/EHCI
 197  */
 198 #ifdef CONFIG_CMD_USB
 199 #define CONFIG_USB_EHCI                 /* Enable EHCI USB support */
 200 #define CONFIG_USB_EHCI_KIRKWOOD        /* on Kirkwood platform */
 201 #define CONFIG_EHCI_IS_TDI
 202 #define CONFIG_USB_STORAGE
 203 #define CONFIG_DOS_PARTITION
 204 #define CONFIG_ISO_PARTITION
 205 #define CONFIG_SUPPORT_VFAT
 206 #endif /* CONFIG_CMD_USB */
 207
 208 /*
 209  * File system
 210  */
 211 #define CONFIG_CMD_UBI
 212 #define CONFIG_CMD_UBIFS
 213 #define CONFIG_RBTREE
 214 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 215 #define CONFIG_MTD_PARTITIONS
 216 #define CONFIG_CMD_MTDPARTS
 217 #define CONFIG_LZO
 218
 219 #endif /* _CONFIG_OPENRD_BASE_H */