include/configs/ot1200.h

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2014 Bachmann electronic GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12 #define CONFIG_MX6
  13 #define CONFIG_DISPLAY_CPUINFO
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #include <asm/arch/imx-regs.h>
  17 #include <asm/imx-common/gpio.h>
  18
  19 #define CONFIG_CMDLINE_TAG
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22 #define CONFIG_REVISION_TAG
  23 #define CONFIG_SYS_GENERIC_BOARD
  24
  25 /* Size of malloc() pool */
  26 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  27
  28 #define CONFIG_BOARD_EARLY_INIT_F
  29 #define CONFIG_MISC_INIT_R
  30 #define CONFIG_MXC_GPIO
  31
  32 /* FUSE Configs */
  33 #define CONFIG_CMD_FUSE
  34 #define CONFIG_MXC_OCOTP
  35
  36 /* UART Configs */
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE           UART1_BASE
  39
  40 /* SF Configs */
  41 #define CONFIG_CMD_SF
  42 #define CONFIG_SPI
  43 #define CONFIG_SPI_FLASH
  44 #define CONFIG_SPI_FLASH_STMICRO
  45 #define CONFIG_SPI_FLASH_WINBOND
  46 #define CONFIG_SPI_FLASH_MACRONIX
  47 #define CONFIG_SPI_FLASH_SST
  48 #define CONFIG_MXC_SPI
  49 #define CONFIG_SF_DEFAULT_BUS  2
  50 #define CONFIG_SF_DEFAULT_CS   0
  51 #define CONFIG_SF_DEFAULT_SPEED 25000000
  52 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  53
  54 /* IO expander */
  55 #define CONFIG_PCA953X
  56 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
  57 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
  58 #define CONFIG_CMD_PCA953X
  59 #define CONFIG_CMD_PCA953X_INFO
  60
  61 /* I2C Configs */
  62 #define CONFIG_CMD_I2C
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  66 #define CONFIG_SYS_I2C_SPEED            100000
  67
  68 /* OCOTP Configs */
  69 #define CONFIG_CMD_IMXOTP
  70 #define CONFIG_IMX_OTP
  71 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  72 #define IMX_OTP_ADDR_MAX                0x7F
  73 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  74 #define IMX_OTPWRITE_ENABLED
  75
  76 /* MMC Configs */
  77 #define CONFIG_FSL_ESDHC
  78 #define CONFIG_FSL_USDHC
  79 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  80 #define CONFIG_SYS_FSL_USDHC_NUM       2
  81
  82 #define CONFIG_MMC
  83 #define CONFIG_CMD_MMC
  84 #define CONFIG_GENERIC_MMC
  85 #define CONFIG_BOUNCE_BUFFER
  86
  87 /* USB Configs */
  88 #define CONFIG_CMD_USB
  89 #define CONFIG_USB_STORAGE
  90 #define CONFIG_USB_EHCI
  91 #define CONFIG_USB_EHCI_MX6
  92 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  93 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  94
  95 #ifdef CONFIG_MX6Q
  96 #define CONFIG_CMD_SATA
  97 #endif
  98
  99 /*
 100  * SATA Configs
 101  */
 102 #ifdef CONFIG_CMD_SATA
 103 #define CONFIG_DWC_AHSATA
 104 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 105 #define CONFIG_DWC_AHSATA_PORT_ID       0
 106 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 107 #define CONFIG_LBA48
 108 #define CONFIG_LIBATA
 109 #endif
 110
 111
 112 /* SPL */
 113 #ifdef CONFIG_SPL
 114 #include "imx6_spl.h"
 115 #define CONFIG_SPL_SPI_SUPPORT
 116 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 117 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 118 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 119 #define CONFIG_SPL_SPI_LOAD
 120 #endif
 121
 122 #define CONFIG_CMD_PING
 123 #define CONFIG_CMD_DHCP
 124 #define CONFIG_CMD_MII
 125 #define CONFIG_CMD_NET
 126 #define CONFIG_FEC_MXC
 127 #define CONFIG_MII
 128 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 129 #define CONFIG_FEC_XCV_TYPE             MII100
 130 #define CONFIG_ETHPRIME                 "FEC"
 131 #define CONFIG_FEC_MXC_PHYADDR          0x5
 132 #define CONFIG_PHYLIB
 133 #define CONFIG_PHY_SMSC
 134
 135 #ifndef CONFIG_SPL
 136 #define CONFIG_CMD_EEPROM
 137 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 138 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 139 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 141 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 142 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 143 #endif
 144
 145 /* Miscellaneous commands */
 146 #define CONFIG_CMD_BMODE
 147 #define CONFIG_CMD_SETEXPR
 148
 149 /* allow to overwrite serial and ethaddr */
 150 #define CONFIG_ENV_OVERWRITE
 151 #define CONFIG_CONS_INDEX              1
 152 #define CONFIG_BAUDRATE                115200
 153
 154 /* Command definition */
 155 #include <config_cmd_default.h>
 156
 157 #undef CONFIG_CMD_IMLS
 158
 159 #define CONFIG_BOOTDELAY               2
 160
 161 #define CONFIG_PREBOOT                 ""
 162
 163 #define CONFIG_LOADADDR                0x12000000
 164 #define CONFIG_SYS_TEXT_BASE           0x17800000
 165
 166 /* Miscellaneous configurable options */
 167 #define CONFIG_SYS_LONGHELP
 168 #define CONFIG_SYS_HUSH_PARSER
 169 #define CONFIG_SYS_CBSIZE              1024
 170
 171 /* Print Buffer Size */
 172 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 173 #define CONFIG_SYS_MAXARGS             16
 174 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 175
 176 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 177
 178 #define CONFIG_CMDLINE_EDITING
 179
 180 /* Physical Memory Map */
 181 #define CONFIG_NR_DRAM_BANKS           1
 182 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 183
 184 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 185 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 186 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 187
 188 #define CONFIG_SYS_INIT_SP_OFFSET \
 189         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_ADDR \
 191         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 192
 193 /* FLASH and environment organization */
 194 #define CONFIG_SYS_NO_FLASH
 195
 196 #define CONFIG_ENV_IS_IN_SPI_FLASH
 197 #define CONFIG_ENV_SIZE                 (64 * 1024)     /* 64 kb */
 198 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 199 /* M25P16 has an erase size of 64 KiB */
 200 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 201 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 202 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 203 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 204 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 205
 206 #define CONFIG_OF_LIBFDT
 207 #define CONFIG_CMD_BOOTZ
 208
 209 #ifndef CONFIG_SYS_DCACHE_OFF
 210 #define CONFIG_CMD_CACHE
 211 #endif
 212
 213 #define CONFIG_CMD_BOOTZ
 214 #define CONFIG_SUPPORT_RAW_INITRD
 215
 216 /* FS Configs */
 217 #define CONFIG_CMD_EXT3
 218 #define CONFIG_CMD_EXT4
 219 #define CONFIG_DOS_PARTITION
 220 #define CONFIG_CMD_FS_GENERIC
 221 #define CONFIG_LIB_UUID
 222 #define CONFIG_CMD_FS_UUID
 223
 224 #define CONFIG_BOOTP_SERVERIP
 225 #define CONFIG_BOOTP_BOOTFILE
 226
 227 #endif         /* __CONFIG_H */