include/configs/ot1200.h

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2014 Bachmann electronic GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* Size of malloc() pool */
  14 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  15
  16 #define CONFIG_MISC_INIT_R
  17
  18 /* UART Configs */
  19 #define CONFIG_MXC_UART
  20 #define CONFIG_MXC_UART_BASE           UART1_BASE
  21
  22 /* SF Configs */
  23 #define CONFIG_SPI
  24 #define CONFIG_MXC_SPI
  25 #define CONFIG_SF_DEFAULT_BUS  2
  26 #define CONFIG_SF_DEFAULT_CS   0
  27 #define CONFIG_SF_DEFAULT_SPEED 25000000
  28 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  29
  30 /* IO expander */
  31 #define CONFIG_PCA953X
  32 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
  33 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
  34 #define CONFIG_CMD_PCA953X
  35 #define CONFIG_CMD_PCA953X_INFO
  36
  37 /* I2C Configs */
  38 #define CONFIG_SYS_I2C
  39 #define CONFIG_SYS_I2C_MXC
  40 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  41 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  42 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  43 #define CONFIG_SYS_I2C_SPEED            100000
  44
  45 /* OCOTP Configs */
  46 #define CONFIG_IMX_OTP
  47 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  48 #define IMX_OTP_ADDR_MAX                0x7F
  49 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  50 #define IMX_OTPWRITE_ENABLED
  51
  52 /* MMC Configs */
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  54 #define CONFIG_SYS_FSL_USDHC_NUM       2
  55
  56 /* USB Configs */
  57 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  58 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  59
  60 /*
  61  * SATA Configs
  62  */
  63 #ifdef CONFIG_CMD_SATA
  64 #define CONFIG_DWC_AHSATA
  65 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  66 #define CONFIG_DWC_AHSATA_PORT_ID       0
  67 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  68 #define CONFIG_LBA48
  69 #define CONFIG_LIBATA
  70 #endif
  71
  72 /* SPL */
  73 #ifdef CONFIG_SPL
  74 #include "imx6_spl.h"
  75 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
  76 #define CONFIG_SPL_SPI_LOAD
  77 #endif
  78
  79 #define CONFIG_FEC_MXC
  80 #define CONFIG_MII
  81 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  82 #define CONFIG_FEC_XCV_TYPE             MII100
  83 #define CONFIG_ETHPRIME                 "FEC"
  84 #define CONFIG_FEC_MXC_PHYADDR          0x5
  85 #define CONFIG_PHYLIB
  86 #define CONFIG_PHY_SMSC
  87
  88 #ifndef CONFIG_SPL
  89 #define CONFIG_ENV_EEPROM_IS_ON_I2C
  90 #define CONFIG_SYS_I2C_EEPROM_BUS             1
  91 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
  92 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
  93 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
  94 #endif
  95
  96 #define CONFIG_PREBOOT                 ""
  97
  98 /* Thermal support */
  99 #define CONFIG_IMX_THERMAL
 100
 101 /* Print Buffer Size */
 102 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 103
 104 /* Physical Memory Map */
 105 #define CONFIG_NR_DRAM_BANKS           1
 106 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 107
 108 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 109 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 110 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 111
 112 #define CONFIG_SYS_INIT_SP_OFFSET \
 113         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 114 #define CONFIG_SYS_INIT_SP_ADDR \
 115         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 116
 117 /* Environment organization */
 118 #define CONFIG_ENV_SIZE                 (64 * 1024)     /* 64 kb */
 119 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 120 /* M25P16 has an erase size of 64 KiB */
 121 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 122 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 123 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 124 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 125 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 126
 127 #define CONFIG_BOOTP_SERVERIP
 128 #define CONFIG_BOOTP_BOOTFILE
 129
 130 #endif         /* __CONFIG_H */