include/configs/p1_p2_rdb_pc.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ RDB boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #if defined(CONFIG_TARGET_P1020MBG)
  14 #define CONFIG_BOARDNAME "P1020MBG-PC"
  15 #define CONFIG_VSC7385_ENET
  16 #define CONFIG_SLIC
  17 #define __SW_BOOT_MASK          0x03
  18 #define __SW_BOOT_NOR           0xe4
  19 #define __SW_BOOT_SD            0x54
  20 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  21 #endif
  22
  23 #if defined(CONFIG_TARGET_P1020UTM)
  24 #define CONFIG_BOARDNAME "P1020UTM-PC"
  25 #define __SW_BOOT_MASK          0x03
  26 #define __SW_BOOT_NOR           0xe0
  27 #define __SW_BOOT_SD            0x50
  28 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  29 #endif
  30
  31 #if defined(CONFIG_TARGET_P1020RDB_PC)
  32 #define CONFIG_BOARDNAME "P1020RDB-PC"
  33 #define CONFIG_NAND_FSL_ELBC
  34 #define CONFIG_VSC7385_ENET
  35 #define CONFIG_SLIC
  36 #define __SW_BOOT_MASK          0x03
  37 #define __SW_BOOT_NOR           0x5c
  38 #define __SW_BOOT_SPI           0x1c
  39 #define __SW_BOOT_SD            0x9c
  40 #define __SW_BOOT_NAND          0xec
  41 #define __SW_BOOT_PCIE          0x6c
  42 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  43 #endif
  44
  45 /*
  46  * P1020RDB-PD board has user selectable switches for evaluating different
  47  * frequency and boot options for the P1020 device. The table that
  48  * follow describe the available options. The front six binary number was in
  49  * accordance with SW3[1:6].
  50  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
  51  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
  52  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
  53  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
  54  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
  55  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  56  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  57  */
  58 #if defined(CONFIG_TARGET_P1020RDB_PD)
  59 #define CONFIG_BOARDNAME "P1020RDB-PD"
  60 #define CONFIG_NAND_FSL_ELBC
  61 #define CONFIG_VSC7385_ENET
  62 #define CONFIG_SLIC
  63 #define __SW_BOOT_MASK          0x03
  64 #define __SW_BOOT_NOR           0x64
  65 #define __SW_BOOT_SPI           0x34
  66 #define __SW_BOOT_SD            0x24
  67 #define __SW_BOOT_NAND          0x44
  68 #define __SW_BOOT_PCIE          0x74
  69 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  70 /*
  71  * Dynamic MTD Partition support with mtdparts
  72  */
  73 #define CONFIG_MTD_DEVICE
  74 #define CONFIG_MTD_PARTITIONS
  75 #define CONFIG_FLASH_CFI_MTD
  76 #endif
  77
  78 #if defined(CONFIG_TARGET_P1021RDB)
  79 #define CONFIG_BOARDNAME "P1021RDB-PC"
  80 #define CONFIG_NAND_FSL_ELBC
  81 #define CONFIG_QE
  82 #define CONFIG_VSC7385_ENET
  83 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
  84                                                 addresses in the LBC */
  85 #define __SW_BOOT_MASK          0x03
  86 #define __SW_BOOT_NOR           0x5c
  87 #define __SW_BOOT_SPI           0x1c
  88 #define __SW_BOOT_SD            0x9c
  89 #define __SW_BOOT_NAND          0xec
  90 #define __SW_BOOT_PCIE          0x6c
  91 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  92 /*
  93  * Dynamic MTD Partition support with mtdparts
  94  */
  95 #define CONFIG_MTD_DEVICE
  96 #define CONFIG_MTD_PARTITIONS
  97 #define CONFIG_FLASH_CFI_MTD
  98 #endif
  99
 100 #if defined(CONFIG_TARGET_P1024RDB)
 101 #define CONFIG_BOARDNAME "P1024RDB"
 102 #define CONFIG_NAND_FSL_ELBC
 103 #define CONFIG_SLIC
 104 #define __SW_BOOT_MASK          0xf3
 105 #define __SW_BOOT_NOR           0x00
 106 #define __SW_BOOT_SPI           0x08
 107 #define __SW_BOOT_SD            0x04
 108 #define __SW_BOOT_NAND          0x0c
 109 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 110 #endif
 111
 112 #if defined(CONFIG_TARGET_P1025RDB)
 113 #define CONFIG_BOARDNAME "P1025RDB"
 114 #define CONFIG_NAND_FSL_ELBC
 115 #define CONFIG_QE
 116 #define CONFIG_SLIC
 117
 118 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 119                                                 addresses in the LBC */
 120 #define __SW_BOOT_MASK          0xf3
 121 #define __SW_BOOT_NOR           0x00
 122 #define __SW_BOOT_SPI           0x08
 123 #define __SW_BOOT_SD            0x04
 124 #define __SW_BOOT_NAND          0x0c
 125 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 126 #endif
 127
 128 #if defined(CONFIG_TARGET_P2020RDB)
 129 #define CONFIG_BOARDNAME "P2020RDB-PC"
 130 #define CONFIG_NAND_FSL_ELBC
 131 #define CONFIG_VSC7385_ENET
 132 #define __SW_BOOT_MASK          0x03
 133 #define __SW_BOOT_NOR           0xc8
 134 #define __SW_BOOT_SPI           0x28
 135 #define __SW_BOOT_SD            0x68 /* or 0x18 */
 136 #define __SW_BOOT_NAND          0xe8
 137 #define __SW_BOOT_PCIE          0xa8
 138 #define CONFIG_SYS_L2_SIZE      (512 << 10)
 139 /*
 140  * Dynamic MTD Partition support with mtdparts
 141  */
 142 #define CONFIG_MTD_DEVICE
 143 #define CONFIG_MTD_PARTITIONS
 144 #define CONFIG_FLASH_CFI_MTD
 145 #endif
 146
 147 #ifdef CONFIG_SDCARD
 148 #define CONFIG_SPL_MMC_MINIMAL
 149 #define CONFIG_SPL_FLUSH_IMAGE
 150 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 151 #define CONFIG_SYS_TEXT_BASE            0x11001000
 152 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 153 #define CONFIG_SPL_PAD_TO               0x20000
 154 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 155 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 156 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
 157 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
 158 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
 159 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 160 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 161 #define CONFIG_SPL_MMC_BOOT
 162 #ifdef CONFIG_SPL_BUILD
 163 #define CONFIG_SPL_COMMON_INIT_DDR
 164 #endif
 165 #endif
 166
 167 #ifdef CONFIG_SPIFLASH
 168 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 169 #define CONFIG_SPL_FLUSH_IMAGE
 170 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 171 #define CONFIG_SYS_TEXT_BASE            0x11001000
 172 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 173 #define CONFIG_SPL_PAD_TO               0x20000
 174 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 175 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
 176 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
 177 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
 178 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
 179 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 180 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 181 #define CONFIG_SPL_SPI_BOOT
 182 #ifdef CONFIG_SPL_BUILD
 183 #define CONFIG_SPL_COMMON_INIT_DDR
 184 #endif
 185 #endif
 186
 187 #ifdef CONFIG_NAND
 188 #ifdef CONFIG_TPL_BUILD
 189 #define CONFIG_SPL_NAND_BOOT
 190 #define CONFIG_SPL_FLUSH_IMAGE
 191 #define CONFIG_SPL_NAND_INIT
 192 #define CONFIG_SPL_COMMON_INIT_DDR
 193 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 194 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 195 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 196 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
 197 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 198 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 199 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 200 #elif defined(CONFIG_SPL_BUILD)
 201 #define CONFIG_SPL_INIT_MINIMAL
 202 #define CONFIG_SPL_FLUSH_IMAGE
 203 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 204 #define CONFIG_SPL_TEXT_BASE            0xff800000
 205 #define CONFIG_SPL_MAX_SIZE             4096
 206 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 207 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 208 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 209 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 210 #endif /* not CONFIG_TPL_BUILD */
 211
 212 #define CONFIG_SPL_PAD_TO               0x20000
 213 #define CONFIG_TPL_PAD_TO               0x20000
 214 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 215 #define CONFIG_SYS_TEXT_BASE            0x11001000
 216 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 217 #endif
 218
 219 #ifndef CONFIG_SYS_TEXT_BASE
 220 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 221 #endif
 222
 223 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 224 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 225 #endif
 226
 227 #ifndef CONFIG_SYS_MONITOR_BASE
 228 #ifdef CONFIG_SPL_BUILD
 229 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 230 #else
 231 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 232 #endif
 233 #endif
 234
 235 #define CONFIG_MP
 236
 237 #define CONFIG_PCIE1    /* PCIE controller 1 (slot 1) */
 238 #define CONFIG_PCIE2    /* PCIE controller 2 (slot 2) */
 239 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 240 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 241 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
 242 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 243
 244 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
 245 #define CONFIG_ENV_OVERWRITE
 246
 247 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 248 #define CONFIG_LBA48
 249
 250 #if defined(CONFIG_TARGET_P2020RDB)
 251 #define CONFIG_SYS_CLK_FREQ     100000000
 252 #else
 253 #define CONFIG_SYS_CLK_FREQ     66666666
 254 #endif
 255 #define CONFIG_DDR_CLK_FREQ     66666666
 256
 257 #define CONFIG_HWCONFIG
 258 /*
 259  * These can be toggled for performance analysis, otherwise use default.
 260  */
 261 #define CONFIG_L2_CACHE
 262 #define CONFIG_BTB
 263
 264 #define CONFIG_ENABLE_36BIT_PHYS
 265
 266 #ifdef CONFIG_PHYS_64BIT
 267 #define CONFIG_ADDR_MAP                 1
 268 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 269 #endif
 270
 271 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 272 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 273
 274 #define CONFIG_SYS_CCSRBAR              0xffe00000
 275 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 276
 277 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 278        SPL code*/
 279 #ifdef CONFIG_SPL_BUILD
 280 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 281 #endif
 282
 283 /* DDR Setup */
 284 #define CONFIG_SYS_DDR_RAW_TIMING
 285 #define CONFIG_DDR_SPD
 286 #define CONFIG_SYS_SPD_BUS_NUM 1
 287 #define SPD_EEPROM_ADDRESS 0x52
 288 #undef CONFIG_FSL_DDR_INTERACTIVE
 289
 290 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 291 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 292 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 293 #else
 294 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_1G
 295 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 296 #endif
 297 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 298 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 299 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 300
 301 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 302
 303 /* Default settings for DDR3 */
 304 #ifndef CONFIG_TARGET_P2020RDB
 305 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 306 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 307 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 308 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 309 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 310 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 311
 312 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 313 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 314 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 315 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 316
 317 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 318 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 319 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 320 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 321 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 322 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 323 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 324 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 325 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 326
 327 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 328 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 329 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 330 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 331 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 332 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 333 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 334 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 335 #endif
 336
 337 #undef CONFIG_CLOCKS_IN_MHZ
 338
 339 /*
 340  * Memory map
 341  *
 342  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 343  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 344  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 345  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 512K cacheable
 346  *   (early boot only)
 347  * 0xff80_0000 0xff80_7fff      NAND flash      32K non-cacheable       CS1/0
 348  * 0xff98_0000 0xff98_ffff      PMC             64K non-cacheable       CS2
 349  * 0xffa0_0000 0xffaf_ffff      CPLD            1M non-cacheable        CS3
 350  * 0xffb0_0000 0xffbf_ffff      VSC7385 switch  1M non-cacheable        CS2
 351  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 352  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 353  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 354  */
 355
 356 /*
 357  * Local Bus Definitions
 358  */
 359 #if (defined(CONFIG_TARGET_P1020MBG) || defined(CONFIG_TARGET_P1020RDB_PD))
 360 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 361 #define CONFIG_SYS_FLASH_BASE           0xec000000
 362 #elif defined(CONFIG_TARGET_P1020UTM)
 363 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 364 #define CONFIG_SYS_FLASH_BASE           0xee000000
 365 #else
 366 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* 16M */
 367 #define CONFIG_SYS_FLASH_BASE           0xef000000
 368 #endif
 369
 370 #ifdef CONFIG_PHYS_64BIT
 371 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 372 #else
 373 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 374 #endif
 375
 376 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 377         | BR_PS_16 | BR_V)
 378
 379 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 380
 381 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 382 #define CONFIG_SYS_FLASH_QUIET_TEST
 383 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 384
 385 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 386
 387 #undef CONFIG_SYS_FLASH_CHECKSUM
 388 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 389 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 390
 391 #define CONFIG_FLASH_CFI_DRIVER
 392 #define CONFIG_SYS_FLASH_CFI
 393 #define CONFIG_SYS_FLASH_EMPTY_INFO
 394 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 395
 396 /* Nand Flash */
 397 #ifdef CONFIG_NAND_FSL_ELBC
 398 #define CONFIG_SYS_NAND_BASE            0xff800000
 399 #ifdef CONFIG_PHYS_64BIT
 400 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 401 #else
 402 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 403 #endif
 404
 405 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 406 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 407 #if defined(CONFIG_TARGET_P1020RDB_PD)
 408 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 409 #else
 410 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 411 #endif
 412
 413 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 414         | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 415         | BR_PS_8       /* Port Size = 8 bit */ \
 416         | BR_MS_FCM     /* MSEL = FCM */ \
 417         | BR_V) /* valid */
 418 #if defined(CONFIG_TARGET_P1020RDB_PD)
 419 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 420         | OR_FCM_PGS    /* Large Page*/ \
 421         | OR_FCM_CSCT \
 422         | OR_FCM_CST \
 423         | OR_FCM_CHT \
 424         | OR_FCM_SCY_1 \
 425         | OR_FCM_TRLX \
 426         | OR_FCM_EHTR)
 427 #else
 428 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB     /* small page */ \
 429         | OR_FCM_CSCT \
 430         | OR_FCM_CST \
 431         | OR_FCM_CHT \
 432         | OR_FCM_SCY_1 \
 433         | OR_FCM_TRLX \
 434         | OR_FCM_EHTR)
 435 #endif
 436 #endif /* CONFIG_NAND_FSL_ELBC */
 437
 438 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 439
 440 #define CONFIG_SYS_INIT_RAM_LOCK
 441 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 442 #ifdef CONFIG_PHYS_64BIT
 443 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 444 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 445 /* The assembler doesn't like typecast */
 446 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 447         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 448           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 449 #else
 450 /* Initial L1 address */
 451 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 452 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 453 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 454 #endif
 455 /* Size of used area in RAM */
 456 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 457
 458 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 459                                         GENERATED_GBL_DATA_SIZE)
 460 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 461
 462 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 463 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 464
 465 #define CONFIG_SYS_CPLD_BASE    0xffa00000
 466 #ifdef CONFIG_PHYS_64BIT
 467 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffa00000ull
 468 #else
 469 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 470 #endif
 471 /* CPLD config size: 1Mb */
 472 #define CONFIG_CPLD_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
 473                                         BR_PS_8 | BR_V)
 474 #define CONFIG_CPLD_OR_PRELIM   (0xfff009f7)
 475
 476 #define CONFIG_SYS_PMC_BASE     0xff980000
 477 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 478 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 479                                         BR_PS_8 | BR_V)
 480 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 481                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 482                                  OR_GPCM_EAD)
 483
 484 #ifdef CONFIG_NAND
 485 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 486 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 487 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 488 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 489 #else
 490 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 491 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 492 #ifdef CONFIG_NAND_FSL_ELBC
 493 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 494 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 495 #endif
 496 #endif
 497 #define CONFIG_SYS_BR3_PRELIM   CONFIG_CPLD_BR_PRELIM   /* CPLD Base Address */
 498 #define CONFIG_SYS_OR3_PRELIM   CONFIG_CPLD_OR_PRELIM   /* CPLD Options */
 499
 500 /* Vsc7385 switch */
 501 #ifdef CONFIG_VSC7385_ENET
 502 #define CONFIG_SYS_VSC7385_BASE         0xffb00000
 503
 504 #ifdef CONFIG_PHYS_64BIT
 505 #define CONFIG_SYS_VSC7385_BASE_PHYS    0xfffb00000ull
 506 #else
 507 #define CONFIG_SYS_VSC7385_BASE_PHYS    CONFIG_SYS_VSC7385_BASE
 508 #endif
 509
 510 #define CONFIG_SYS_VSC7385_BR_PRELIM    \
 511         (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
 512 #define CONFIG_SYS_VSC7385_OR_PRELIM    (OR_AM_128KB | OR_GPCM_CSNT | \
 513                         OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
 514                         OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
 515
 516 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_VSC7385_BR_PRELIM
 517 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_VSC7385_OR_PRELIM
 518
 519 /* The size of the VSC7385 firmware image */
 520 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 521 #endif
 522
 523 /*
 524  * Config the L2 Cache as L2 SRAM
 525 */
 526 #if defined(CONFIG_SPL_BUILD)
 527 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 528 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 529 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 530 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 531 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 532 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 533 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 534 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 535 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 536 #if defined(CONFIG_TARGET_P2020RDB)
 537 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (364 << 10)
 538 #else
 539 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 540 #endif
 541 #elif defined(CONFIG_NAND)
 542 #ifdef CONFIG_TPL_BUILD
 543 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 544 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 545 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 546 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 547 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 548 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 549 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 550 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 551 #else
 552 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 553 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 554 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 555 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 556 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 557 #endif /* CONFIG_TPL_BUILD */
 558 #endif
 559 #endif
 560
 561 /* Serial Port - controlled on board with jumper J8
 562  * open - index 2
 563  * shorted - index 1
 564  */
 565 #define CONFIG_CONS_INDEX               1
 566 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 567 #define CONFIG_SYS_NS16550_SERIAL
 568 #define CONFIG_SYS_NS16550_REG_SIZE     1
 569 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 570 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 571 #define CONFIG_NS16550_MIN_FUNCTIONS
 572 #endif
 573
 574 #define CONFIG_SYS_BAUDRATE_TABLE       \
 575         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 576
 577 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 578 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 579
 580 /* I2C */
 581 #define CONFIG_SYS_I2C
 582 #define CONFIG_SYS_I2C_FSL
 583 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 584 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 585 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 586 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 587 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 588 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 589 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 590 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 591 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 592
 593 /*
 594  * I2C2 EEPROM
 595  */
 596 #undef CONFIG_ID_EEPROM
 597
 598 #define CONFIG_RTC_PT7C4338
 599 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 600 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 601
 602 /* enable read and write access to EEPROM */
 603 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 604 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 605 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 606
 607 /*
 608  * eSPI - Enhanced SPI
 609  */
 610 #define CONFIG_HARD_SPI
 611
 612 #if defined(CONFIG_SPI_FLASH)
 613 #define CONFIG_SF_DEFAULT_SPEED 10000000
 614 #define CONFIG_SF_DEFAULT_MODE  0
 615 #endif
 616
 617 #if defined(CONFIG_PCI)
 618 /*
 619  * General PCI
 620  * Memory space is mapped 1-1, but I/O space must start from 0.
 621  */
 622
 623 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 624 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT"
 625 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 626 #ifdef CONFIG_PHYS_64BIT
 627 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 628 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 629 #else
 630 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 631 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 632 #endif
 633 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 634 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 635 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 636 #ifdef CONFIG_PHYS_64BIT
 637 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 638 #else
 639 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 640 #endif
 641 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 642
 643 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 644 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 645 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 646 #ifdef CONFIG_PHYS_64BIT
 647 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 648 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 649 #else
 650 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 651 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 652 #endif
 653 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 654 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 655 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 656 #ifdef CONFIG_PHYS_64BIT
 657 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 658 #else
 659 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 660 #endif
 661 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 662
 663 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 664 #endif /* CONFIG_PCI */
 665
 666 #if defined(CONFIG_TSEC_ENET)
 667 #define CONFIG_MII              /* MII PHY management */
 668 #define CONFIG_TSEC1
 669 #define CONFIG_TSEC1_NAME       "eTSEC1"
 670 #define CONFIG_TSEC2
 671 #define CONFIG_TSEC2_NAME       "eTSEC2"
 672 #define CONFIG_TSEC3
 673 #define CONFIG_TSEC3_NAME       "eTSEC3"
 674
 675 #define TSEC1_PHY_ADDR  2
 676 #define TSEC2_PHY_ADDR  0
 677 #define TSEC3_PHY_ADDR  1
 678
 679 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 680 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 681 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 682
 683 #define TSEC1_PHYIDX    0
 684 #define TSEC2_PHYIDX    0
 685 #define TSEC3_PHYIDX    0
 686
 687 #define CONFIG_ETHPRIME "eTSEC1"
 688
 689 #define CONFIG_HAS_ETH0
 690 #define CONFIG_HAS_ETH1
 691 #define CONFIG_HAS_ETH2
 692 #endif /* CONFIG_TSEC_ENET */
 693
 694 #ifdef CONFIG_QE
 695 /* QE microcode/firmware address */
 696 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 697 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 698 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 699 #endif /* CONFIG_QE */
 700
 701 #ifdef CONFIG_TARGET_P1025RDB
 702 /*
 703  * QE UEC ethernet configuration
 704  */
 705 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 706
 707 #undef CONFIG_UEC_ETH
 708 #define CONFIG_PHY_MODE_NEED_CHANGE
 709
 710 #define CONFIG_UEC_ETH1 /* ETH1 */
 711 #define CONFIG_HAS_ETH0
 712
 713 #ifdef CONFIG_UEC_ETH1
 714 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 715 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 716 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 717 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 718 #define CONFIG_SYS_UEC1_PHY_ADDR        0x0     /* 0x0 for MII */
 719 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 720 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 721 #endif /* CONFIG_UEC_ETH1 */
 722
 723 #define CONFIG_UEC_ETH5 /* ETH5 */
 724 #define CONFIG_HAS_ETH1
 725
 726 #ifdef CONFIG_UEC_ETH5
 727 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 728 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 729 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 730 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 731 #define CONFIG_SYS_UEC5_PHY_ADDR        0x3     /* 0x3 for RMII */
 732 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 733 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 734 #endif /* CONFIG_UEC_ETH5 */
 735 #endif /* CONFIG_TARGET_P1025RDB */
 736
 737 /*
 738  * Environment
 739  */
 740 #ifdef CONFIG_SPIFLASH
 741 #define CONFIG_ENV_SPI_BUS      0
 742 #define CONFIG_ENV_SPI_CS       0
 743 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 744 #define CONFIG_ENV_SPI_MODE     0
 745 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 746 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 747 #define CONFIG_ENV_SECT_SIZE    0x10000
 748 #elif defined(CONFIG_SDCARD)
 749 #define CONFIG_FSL_FIXED_MMC_LOCATION
 750 #define CONFIG_ENV_SIZE         0x2000
 751 #define CONFIG_SYS_MMC_ENV_DEV  0
 752 #elif defined(CONFIG_NAND)
 753 #ifdef CONFIG_TPL_BUILD
 754 #define CONFIG_ENV_SIZE         0x2000
 755 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 756 #else
 757 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 758 #endif
 759 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 760 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 761 #elif defined(CONFIG_SYS_RAMBOOT)
 762 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 763 #define CONFIG_ENV_SIZE         0x2000
 764 #else
 765 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 766 #define CONFIG_ENV_SIZE         0x2000
 767 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 768 #endif
 769
 770 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 771 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 772
 773 /*
 774  * USB
 775  */
 776 #define CONFIG_HAS_FSL_DR_USB
 777
 778 #if defined(CONFIG_HAS_FSL_DR_USB)
 779 #ifdef CONFIG_USB_EHCI_HCD
 780 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 781 #define CONFIG_USB_EHCI_FSL
 782 #define CONFIG_EHCI_DESC_BIG_ENDIAN
 783 #endif
 784 #endif
 785
 786 #if defined(CONFIG_TARGET_P1020RDB_PD)
 787 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 788 #endif
 789
 790 #ifdef CONFIG_MMC
 791 #define CONFIG_FSL_ESDHC
 792 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 793 #endif
 794
 795 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 796
 797 /*
 798  * Miscellaneous configurable options
 799  */
 800 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 801 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 802 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 803
 804 /*
 805  * For booting Linux, the board info and command line data
 806  * have to be in the first 64 MB of memory, since this is
 807  * the maximum mapped by the Linux kernel during initialization.
 808  */
 809 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 810 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 811
 812 #if defined(CONFIG_CMD_KGDB)
 813 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 814 #endif
 815
 816 /*
 817  * Environment Configuration
 818  */
 819 #define CONFIG_HOSTNAME         unknown
 820 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 821 #define CONFIG_BOOTFILE         "uImage"
 822 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 823
 824 /* default location for tftp and bootm */
 825 #define CONFIG_LOADADDR 1000000
 826
 827 #ifdef __SW_BOOT_NOR
 828 #define __NOR_RST_CMD   \
 829 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
 830 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 831 #endif
 832 #ifdef __SW_BOOT_SPI
 833 #define __SPI_RST_CMD   \
 834 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
 835 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 836 #endif
 837 #ifdef __SW_BOOT_SD
 838 #define __SD_RST_CMD    \
 839 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
 840 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 841 #endif
 842 #ifdef __SW_BOOT_NAND
 843 #define __NAND_RST_CMD  \
 844 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
 845 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 846 #endif
 847 #ifdef __SW_BOOT_PCIE
 848 #define __PCIE_RST_CMD  \
 849 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
 850 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 851 #endif
 852
 853 #define CONFIG_EXTRA_ENV_SETTINGS       \
 854 "netdev=eth0\0" \
 855 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 856 "loadaddr=1000000\0"    \
 857 "bootfile=uImage\0"     \
 858 "tftpflash=tftpboot $loadaddr $uboot; " \
 859         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 860         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
 861         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 862         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 863         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
 864 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
 865 "consoledev=ttyS0\0"    \
 866 "ramdiskaddr=2000000\0" \
 867 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 868 "fdtaddr=1e00000\0"     \
 869 "bdev=sda1\0" \
 870 "jffs2nor=mtdblock3\0"  \
 871 "norbootaddr=ef080000\0"        \
 872 "norfdtaddr=ef040000\0" \
 873 "jffs2nand=mtdblock9\0" \
 874 "nandbootaddr=100000\0" \
 875 "nandfdtaddr=80000\0"           \
 876 "ramdisk_size=120000\0" \
 877 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
 878 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
 879 __stringify(__NOR_RST_CMD)"\0" \
 880 __stringify(__SPI_RST_CMD)"\0" \
 881 __stringify(__SD_RST_CMD)"\0" \
 882 __stringify(__NAND_RST_CMD)"\0" \
 883 __stringify(__PCIE_RST_CMD)"\0"
 884
 885 #define CONFIG_NFSBOOTCOMMAND   \
 886 "setenv bootargs root=/dev/nfs rw "     \
 887 "nfsroot=$serverip:$rootpath "  \
 888 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 889 "console=$consoledev,$baudrate $othbootargs;" \
 890 "tftp $loadaddr $bootfile;"     \
 891 "tftp $fdtaddr $fdtfile;"       \
 892 "bootm $loadaddr - $fdtaddr"
 893
 894 #define CONFIG_HDBOOT   \
 895 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 896 "console=$consoledev,$baudrate $othbootargs;" \
 897 "usb start;"    \
 898 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 899 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 900 "bootm $loadaddr - $fdtaddr"
 901
 902 #define CONFIG_USB_FAT_BOOT     \
 903 "setenv bootargs root=/dev/ram rw "     \
 904 "console=$consoledev,$baudrate $othbootargs " \
 905 "ramdisk_size=$ramdisk_size;"   \
 906 "usb start;"    \
 907 "fatload usb 0:2 $loadaddr $bootfile;"  \
 908 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 909 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 910 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 911
 912 #define CONFIG_USB_EXT2_BOOT    \
 913 "setenv bootargs root=/dev/ram rw "     \
 914 "console=$consoledev,$baudrate $othbootargs " \
 915 "ramdisk_size=$ramdisk_size;"   \
 916 "usb start;"    \
 917 "ext2load usb 0:4 $loadaddr $bootfile;" \
 918 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
 919 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
 920 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 921
 922 #define CONFIG_NORBOOT  \
 923 "setenv bootargs root=/dev/$jffs2nor rw "       \
 924 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
 925 "bootm $norbootaddr - $norfdtaddr"
 926
 927 #define CONFIG_RAMBOOTCOMMAND   \
 928 "setenv bootargs root=/dev/ram rw "     \
 929 "console=$consoledev,$baudrate $othbootargs " \
 930 "ramdisk_size=$ramdisk_size;"   \
 931 "tftp $ramdiskaddr $ramdiskfile;"       \
 932 "tftp $loadaddr $bootfile;"     \
 933 "tftp $fdtaddr $fdtfile;"       \
 934 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 935
 936 #define CONFIG_BOOTCOMMAND      CONFIG_HDBOOT
 937
 938 #endif /* __CONFIG_H */