include/configs/pcm030.h

   1 /*
   2  * (C) Copyright 2003-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2006
   6  * Eric Schumann, Phytec Messatechnik GmbH
   7  *
   8  * (C) Copyright 2009
   9  * Jon Smirl <jonsmirl@gmail.com>
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 #define CONFIG_BOARDINFO         "phyCORE-MPC5200B-tiny"
  34
  35 /*-----------------------------------------------------------------------------
  36 High Level Configuration Options
  37 (easy to change)
  38 -----------------------------------------------------------------------------*/
  39 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  40 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  41 #define CONFIG_MPC5200_DDR      1       /* (with DDR-SDRAM) */
  42 #define CONFIG_PHYCORE_MPC5200B_TINY 1  /* phyCORE-MPC5200B -> */
  43                                         /* FEC configuration and IDE */
  44
  45 /*
  46  * Valid values for CONFIG_SYS_TEXT_BASE are:
  47  * 0xFFF00000   boot high (standard configuration)
  48  * 0xFF000000   boot low
  49  * 0x00100000   boot from RAM (for testing only)
  50  */
  51 #ifndef CONFIG_SYS_TEXT_BASE
  52 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  53 #endif
  54
  55 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
  56
  57 /*-----------------------------------------------------------------------------
  58 Serial console configuration
  59 -----------------------------------------------------------------------------*/
  60 #define CONFIG_PSC_CONSOLE      3       /* console is on PSC3 -> */
  61                                         /*define gps port conf. */
  62                                         /* register later on to */
  63                                         /*enable UART function! */
  64 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  65 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  66
  67 /*
  68  * Command line configuration.
  69  */
  70 #include <config_cmd_default.h>
  71
  72 #define CONFIG_CMD_DATE
  73 #define CONFIG_CMD_DHCP
  74 #define CONFIG_CMD_EEPROM
  75 #define CONFIG_CMD_I2C
  76 #define CONFIG_CMD_JFFS2
  77 #define CONFIG_CMD_MII
  78 #define CONFIG_CMD_NFS
  79 #define CONFIG_CMD_PCI
  80
  81 #define CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
  82
  83 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)        /* Boot low */
  84 #define CONFIG_SYS_LOWBOOT 1
  85 #endif
  86 /* RAMBOOT will be defined automatically in memory section */
  87
  88 #define CONFIG_JFFS2_CMDLINE
  89 #define MTDIDS_DEFAULT          "nor0=physmap-flash.0"
  90 #define MTDPARTS_DEFAULT        "mtdparts=physmap-flash.0:256k(ubootl)," \
  91         "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
  92
  93 /*-----------------------------------------------------------------------------
  94 Autobooting
  95 -----------------------------------------------------------------------------*/
  96 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds */
  97 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* allow stopping of boot process */
  98                                         /* even with bootdelay=0 */
  99 #undef  CONFIG_BOOTARGS
 100
 101
 102 #define CONFIG_PREBOOT  "echo;" \
 103         "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
 104                 "mount root filesystem over NFS;" \
 105         "echo"
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 108         "netdev=eth0\0"                                                 \
 109         "uimage=uImage-pcm030\0"                                        \
 110         "oftree=oftree-pcm030.dtb\0"                                    \
 111         "jffs2=root-pcm030.jffs2\0"                                     \
 112         "uboot=u-boot-pcm030.bin\0"                                     \
 113         "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)"        \
 114                 " $(mtdparts) rw\0"                                     \
 115         "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2"   \
 116                 " rootfstype=jffs2\0"                                   \
 117         "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs"           \
 118                 " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::"   \
 119                 "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
 120         "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \
 121                 " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \
 122         "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - "    \
 123                 "0xfff40000\0"                                          \
 124                 " cp.b 0x400000 0xff040000 $(filesize)\0"               \
 125         "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \
 126                 "cp.b 0x400000 0xff200000 $(filesize)\0"                \
 127         "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \
 128                 " cp.b 0x400000 0xfff40000 $(filesize)\0"               \
 129         "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \
 130                 " cp.b 0x400000 0xFFF00000 $(filesize)\0"               \
 131         "unlock=yes\0"                                                  \
 132         ""
 133
 134 #define CONFIG_BOOTCOMMAND              "run bcmd_flash"
 135
 136 /*--------------------------------------------------------------------------
 137 IPB Bus clocking configuration.
 138  ---------------------------------------------------------------------------*/
 139 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
 140
 141 /*-------------------------------------------------------------------------
 142  * PCI Mapping:
 143  * 0x40000000 - 0x4fffffff - PCI Memory
 144  * 0x50000000 - 0x50ffffff - PCI IO Space
 145  * -----------------------------------------------------------------------*/
 146 #define CONFIG_PCI                      1
 147 #define CONFIG_PCI_PNP                  1
 148 #define CONFIG_PCI_SCAN_SHOW            1
 149 #define CONFIG_PCI_MEM_BUS              0x40000000
 150 #define CONFIG_PCI_MEM_PHYS             CONFIG_PCI_MEM_BUS
 151 #define CONFIG_PCI_MEM_SIZE             0x10000000
 152 #define CONFIG_PCI_IO_BUS               0x50000000
 153 #define CONFIG_PCI_IO_PHYS              CONFIG_PCI_IO_BUS
 154 #define CONFIG_PCI_IO_SIZE              0x01000000
 155 #define CONFIG_SYS_XLB_PIPELINING       1
 156
 157 /*---------------------------------------------------------------------------
 158  I2C configuration
 159 ---------------------------------------------------------------------------*/
 160 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
 161 #define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
 162 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
 163 #define CONFIG_SYS_I2C_SLAVE 0x7F
 164
 165 /*---------------------------------------------------------------------------
 166  EEPROM CAT24WC32 configuration
 167 ---------------------------------------------------------------------------*/
 168 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52    /* 1010100x */
 169 #define CONFIG_SYS_I2C_FACT_ADDR        0x52    /* EEPROM CAT24WC32 */
 170 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2       /* Bytes of address */
 171 #define CONFIG_SYS_EEPROM_SIZE          2048
 172 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 173 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
 174
 175 /*---------------------------------------------------------------------------
 176 RTC configuration
 177 ---------------------------------------------------------------------------*/
 178 #define RTC
 179 #define CONFIG_RTC_PCF8563              1
 180 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 181
 182 /*---------------------------------------------------------------------------
 183  Flash configuration
 184 ---------------------------------------------------------------------------*/
 185
 186 #define CONFIG_SYS_FLASH_BASE           0xff000000
 187 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 188 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 189
 190 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 191 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 192 #define CONFIG_SYS_FLASH_EMPTY_INFO
 193 #define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */
 194 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
 195                                                 /* (= chip selects) */
 196 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 197
 198 /*
 199  * Use also hardware protection. This seems required, as the BDI uses
 200  * hardware protection. Without this, U-Boot can't work with this sectors,
 201  * as its protection is software only by default
 202  */
 203 #define CONFIG_SYS_FLASH_PROTECTION     1
 204
 205 /*---------------------------------------------------------------------------
 206  Environment settings
 207 ---------------------------------------------------------------------------*/
 208
 209 /* pcm030 ships with environment is EEPROM by default */
 210 #define CONFIG_ENV_IS_IN_EEPROM 1
 211 #define CONFIG_ENV_OFFSET       0x00    /* environment starts at the */
 212                                         /*beginning of the EEPROM */
 213 #define CONFIG_ENV_SIZE         CONFIG_SYS_EEPROM_SIZE
 214
 215 #define CONFIG_ENV_OVERWRITE    1
 216
 217 /*-----------------------------------------------------------------------------
 218   Memory map
 219 -----------------------------------------------------------------------------*/
 220 #define CONFIG_SYS_MBAR 0xF0000000      /* MBAR has to be switched by other */
 221                                         /* bootloader or debugger config */
 222 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 223 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 224 /* Use SRAM until RAM will be available */
 225 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 226 #define CONFIG_SYS_INIT_RAM_END         MPC5XXX_SRAM_SIZE       /* End of used */
 227                                                                 /* area in DPRAM */
 228 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes */
 229                                                 /* reserved for initial data */
 230 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - \
 231                                                 CONFIG_SYS_GBL_DATA_SIZE)
 232 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 233
 234 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 235 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 236 #       define CONFIG_SYS_RAMBOOT               1
 237 #endif
 238
 239 #define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
 240 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
 241 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
 242
 243 /*-----------------------------------------------------------------------------
 244  Ethernet configuration
 245 -----------------------------------------------------------------------------*/
 246 #define CONFIG_MPC5xxx_FEC              1
 247 #define CONFIG_MPC5xxx_FEC_MII100
 248 #define CONFIG_PHY_ADDR                 0x01
 249
 250 /*---------------------------------------------------------------------------
 251  GPIO configuration
 252  ---------------------------------------------------------------------------*/
 253
 254 /* GPIO port configuration
 255  *
 256  * Pin mapping:
 257  *
 258  * [29:31] = 01x
 259  * PSC1_0 -> AC97 SDATA out
 260  * PSC1_1 -> AC97 SDTA in
 261  * PSC1_2 -> AC97 SYNC out
 262  * PSC1_3 -> AC97 bitclock out
 263  * PSC1_4 -> AC97 reset out
 264  *
 265  * [25:27] = 001
 266  * PSC2_0 -> CAN 1 Tx out
 267  * PSC2_1 -> CAN 1 Rx in
 268  * PSC2_2 -> CAN 2 Tx out
 269  * PSC2_3 -> CAN 2 Rx in
 270  * PSC2_4 -> GPIO (claimed for ATA reset, active low)
 271  *
 272  *
 273  * [20:23] = 1100
 274  * PSC3_0 -> UART Tx out
 275  * PSC3_1 -> UART Rx in
 276  * PSC3_2 -> UART RTS (in/out FIXME)
 277  * PSC3_3 -> UART CTS (in/out FIXME)
 278  * PSC3_4 -> LocalPlus Bus CS6 \
 279  * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5]
 280  * PSC3_6 -> dedicated SPI MOSI out (master case)
 281  * PSC3_7 -> dedicated SPI MISO in (master case)
 282  * PSC3_8 -> dedicated SPI SS out (master case)
 283  * PSC3_9 -> dedicated SPI CLK out (master case)
 284  *
 285  * [18:19] = 01
 286  * USB_0 -> USB OE out
 287  * USB_1 -> USB Tx- out
 288  * USB_2 -> USB Tx+ out
 289  * USB_3 -> USB RxD (in/out FIXME)
 290  * USB_4 -> USB Rx+ in
 291  * USB_5 -> USB Rx- in
 292  * USB_6 -> USB PortPower out
 293  * USB_7 -> USB speed out
 294  * USB_8 -> USB suspend (in/out FIXME)
 295  * USB_9 -> USB overcurrent in
 296  *
 297  * [17] = 0
 298  * USB differential mode
 299  *
 300  * [16] = 0
 301  * PCI enabled
 302  *
 303  * [12:15] = 0101
 304  * ETH_0 -> ETH Txen
 305  * ETH_1 -> ETH TxD0
 306  * ETH_2 -> ETH TxD1
 307  * ETH_3 -> ETH TxD2
 308  * ETH_4 -> ETH TxD3
 309  * ETH_5 -> ETH Txerr
 310  * ETH_6 -> ETH MDC
 311  * ETH_7 -> ETH MDIO
 312  * ETH_8 -> ETH RxDv
 313  * ETH_9 -> ETH RxCLK
 314  * ETH_10 -> ETH Collision
 315  * ETH_11 -> ETH TxD
 316  * ETH_12 -> ETH RxD0
 317  * ETH_13 -> ETH RxD1
 318  * ETH_14 -> ETH RxD2
 319  * ETH_15 -> ETH RxD3
 320  * ETH_16 -> ETH Rxerr
 321  * ETH_17 -> ETH CRS
 322  *
 323  * [9:11] = 101
 324  * PSC6_0 -> UART RxD in
 325  * PSC6_1 -> UART CTS (in/out FIXME)
 326  * PSC6_2 -> UART TxD out
 327  * PSC6_3 -> UART RTS (in/out FIXME)
 328  *
 329  * [2:3/6:7] = 00/11
 330  * TMR_0 -> ATA_CS0 out
 331  * TMR_1 -> ATA_CS1 out
 332  * TMR_2 -> GPIO
 333  * TMR_3 -> GPIO
 334  * TMR_4 -> GPIO
 335  * TMR_5 -> GPIO
 336  * TMR_6 -> GPIO
 337  * TMR_7 -> GPIO
 338  * I2C_0 -> I2C 1 Clock out
 339  * I2C_1 -> I2C 1 IO in/out
 340  * I2C_2 -> I2C 2 Clock out
 341  * I2C_3 -> I2C 2 IO in/out
 342  *
 343  * [4] = 1
 344  * PSC3_5 is used as CS7
 345  *
 346  * [5] = 1
 347  * PSC3_4 is used as CS6
 348  *
 349  * [1] = 0
 350  * gpio_wkup_7 is GPIO
 351  *
 352  * [0] = 0
 353  * gpio_wkup_6 is GPIO
 354  *
 355  */
 356 #define CONFIG_SYS_GPS_PORT_CONFIG      0x0f551c12
 357
 358 /*-----------------------------------------------------------------------------
 359  Miscellaneous configurable options
 360 -------------------------------------------------------------------------------*/
 361 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 362 #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
 363
 364 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
 365
 366 #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
 367 #if defined(CONFIG_CMD_KGDB)
 368 #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
 369 #endif
 370
 371 #if defined(CONFIG_CMD_KGDB)
 372 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
 373 #else
 374 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
 375 #endif
 376 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 377                                                         /* Print Buffer Size */
 378 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
 379 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 380
 381 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
 382 #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
 383
 384 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
 385 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
 386
 387 #define CONFIG_DISPLAY_BOARDINFO 1
 388
 389 /*-----------------------------------------------------------------------------
 390  Various low-level settings
 391 -----------------------------------------------------------------------------*/
 392 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 393 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 394
 395 /* no burst access on the LPB */
 396 #define CONFIG_SYS_CS_BURST             0x00000000
 397 /* one deadcycle for the 33MHz statemachine */
 398 #define CONFIG_SYS_CS_DEADCYCLE         0x33333331
 399 /* one additional waitstate for the 33MHz statemachine */
 400 #define CONFIG_SYS_BOOTCS_CFG           0x0001dd00
 401 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 402 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 403
 404 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 405
 406 /*-----------------------------------------------------------------------
 407  * USB stuff
 408  *-----------------------------------------------------------------------
 409  */
 410 #define CONFIG_USB_CLOCK                0x0001BBBB
 411 #define CONFIG_USB_CONFIG               0x00001000
 412
 413 /*---------------------------------------------------------------------------
 414  IDE/ATA stuff Supports IDE harddisk
 415 ----------------------------------------------------------------------------*/
 416
 417 #undef  CONFIG_IDE_8xx_PCCARD   /* Use IDE with PC Card Adapter */
 418 #undef  CONFIG_IDE_8xx_DIRECT   /* Direct IDE not supported */
 419 #undef  CONFIG_IDE_LED          /* LED for ide not supported */
 420 #define CONFIG_SYS_ATA_CS_ON_TIMER01
 421 #define CONFIG_IDE_RESET 1      /* reset for ide supported */
 422 #define CONFIG_IDE_PREINIT
 423 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
 424 #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
 425 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 426 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 427 /* Offset for data I/O                  */
 428 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 429 /* Offset for normal register accesses  */
 430 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 431 /* Offset for alternate registers       */
 432 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 433 /* Interval between registers */
 434 #define CONFIG_SYS_ATA_STRIDE           4
 435 #define CONFIG_ATAPI                    1
 436
 437 /* we enable IDE and FAT support, so we also need partition support */
 438 #define CONFIG_DOS_PARTITION 1
 439
 440 /* USB */
 441 #define CONFIG_USB_OHCI
 442 #define CONFIG_USB_STORAGE
 443
 444 /* pass open firmware flat tree */
 445 #define CONFIG_OF_LIBFDT                1
 446 #define CONFIG_OF_BOARD_SETUP           1
 447
 448 #define OF_CPU                          "PowerPC,5200@0"
 449 #define OF_TBCLK                        CONFIG_SYS_MPC5XXX_CLKIN
 450 #define OF_SOC                          "soc5200@f0000000"
 451 #define OF_STDOUT_PATH                  "/soc5200@f0000000/serial@2400"
 452
 453 #endif /* __CONFIG_H */