include/configs/pdnb3.h

   1 /*
   2  * (C) Copyright 2006-2007
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * Configuation settings for the PDNB3 board.
   6  *
   7  * See file CREDITS for list of people who contributed to this
   8  * project.
   9  *
  10  * This program is free software; you can redistribute it and/or
  11  * modify it under the terms of the GNU General Public License as
  12  * published by the Free Software Foundation; either version 2 of
  13  * the License, or (at your option) any later version.
  14  *
  15  * This program is distributed in the hope that it will be useful,
  16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18  * GNU General Public License for more details.
  19  *
  20  * You should have received a copy of the GNU General Public License
  21  * along with this program; if not, write to the Free Software
  22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  23  * MA 02111-1307 USA
  24  */
  25
  26 #ifndef __CONFIG_H
  27 #define __CONFIG_H
  28
  29 /*
  30  * High Level Configuration Options
  31  * (easy to change)
  32  */
  33 #define CONFIG_IXP425           1       /* This is an IXP425 CPU        */
  34 #define CONFIG_PDNB3            1       /* on an PDNB3 board            */
  35
  36 #define CONFIG_DISPLAY_CPUINFO  1       /* display cpu info (and speed) */
  37 #define CONFIG_DISPLAY_BOARDINFO 1      /* display board info           */
  38
  39 /*
  40  * Ethernet
  41  */
  42 #define CONFIG_IXP4XX_NPE       1       /* include IXP4xx NPE support   */
  43 #define CONFIG_NET_MULTI        1
  44 #define CONFIG_PHY_ADDR         16      /* NPE0 PHY address             */
  45 #define CONFIG_HAS_ETH1
  46 #define CONFIG_PHY1_ADDR        18      /* NPE1 PHY address             */
  47 #define CONFIG_MII              1       /* MII PHY management           */
  48 #define CONFIG_SYS_RX_ETH_BUFFER        16      /* Number of ethernet rx buffers & descriptors */
  49
  50 /*
  51  * Misc configuration options
  52  */
  53 #define CONFIG_USE_IRQ          1       /* we need IRQ stuff for timer  */
  54 #define CONFIG_TIMER_IRQ
  55
  56 #define CONFIG_BOOTCOUNT_LIMIT          /* support for bootcount limit  */
  57 #define CONFIG_SYS_BOOTCOUNT_ADDR       0x60003000 /* inside qmrg sram          */
  58
  59 #define CONFIG_CMDLINE_TAG      1       /* enable passing of ATAGs      */
  60 #define CONFIG_SETUP_MEMORY_TAGS 1
  61 #define CONFIG_INITRD_TAG       1
  62
  63 /*
  64  * Size of malloc() pool
  65  */
  66 #define CONFIG_SYS_MALLOC_LEN           (1 << 20)
  67 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
  68
  69 /* allow to overwrite serial and ethaddr */
  70 #define CONFIG_ENV_OVERWRITE
  71
  72 #define CONFIG_IXP_SERIAL
  73 #define CONFIG_BAUDRATE         115200
  74 #define CONFIG_SYS_IXP425_CONSOLE       IXP425_UART1   /* we use UART1 for console */
  75
  76
  77 /*
  78  * BOOTP options
  79  */
  80 #define CONFIG_BOOTP_BOOTFILESIZE
  81 #define CONFIG_BOOTP_BOOTPATH
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84
  85
  86 /*
  87  * Command line configuration.
  88  */
  89 #include <config_cmd_default.h>
  90
  91 #define CONFIG_CMD_DHCP
  92 #define CONFIG_CMD_DATE
  93 #define CONFIG_CMD_NET
  94 #define CONFIG_CMD_MII
  95 #define CONFIG_CMD_I2C
  96 #define CONFIG_CMD_ELF
  97 #define CONFIG_CMD_PING
  98
  99 #if !defined(CONFIG_SCPU)
 100 #define CONFIG_CMD_NAND
 101 #endif
 102
 103
 104 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
 105 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
 106
 107 /*
 108  * Miscellaneous configurable options
 109  */
 110 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 111 #define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 112 #define CONFIG_SYS_CBSIZE              256             /* Console I/O Buffer Size      */
 113 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 114 #define CONFIG_SYS_MAXARGS             16              /* max number of command args   */
 115 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE      /* Boot Argument Buffer Size    */
 116
 117 #define CONFIG_SYS_MEMTEST_START       0x00400000      /* memtest works on     */
 118 #define CONFIG_SYS_MEMTEST_END         0x00800000      /* 4 ... 8 MB in DRAM   */
 119 #define CONFIG_SYS_LOAD_ADDR           0x00010000      /* default load address */
 120
 121 #define CONFIG_SYS_HZ                   1000            /* decrementer freq: 1 ms ticks */
 122                                                 /* valid baudrates */
 123 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
 124
 125 /*
 126  * Stack sizes
 127  *
 128  * The stack sizes are set up in start.S using the settings below
 129  */
 130 #define CONFIG_STACKSIZE        (128*1024)      /* regular stack */
 131 #ifdef CONFIG_USE_IRQ
 132 #define CONFIG_STACKSIZE_IRQ    (4*1024)        /* IRQ stack */
 133 #define CONFIG_STACKSIZE_FIQ    (4*1024)        /* FIQ stack */
 134 #endif
 135
 136 /***************************************************************
 137  * Platform/Board specific defines start here.
 138  ***************************************************************/
 139
 140 /*-----------------------------------------------------------------------
 141  * Default configuration (environment varibles...)
 142  *----------------------------------------------------------------------*/
 143 #define CONFIG_PREBOOT  "echo;" \
 144         "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
 145         "echo"
 146
 147 #undef  CONFIG_BOOTARGS
 148
 149 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 150         "netdev=eth0\0"                                                 \
 151         "hostname=pdnb3\0"                                              \
 152         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 153                 "nfsroot=${serverip}:${rootpath}\0"                     \
 154         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 155         "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} "         \
 156                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 157                 ":${hostname}:${netdev}:off panic=1\0"                  \
 158         "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \
 159         "mtdparts=${mtdparts}\0"                                        \
 160         "flash_nfs=run nfsargs addip addtty;"                           \
 161                 "bootm ${kernel_addr}\0"                                \
 162         "flash_self=run ramargs addip addtty;"                          \
 163                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 164         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
 165                 "bootm\0"                                               \
 166         "rootpath=/opt/buildroot\0"                                     \
 167         "bootfile=/tftpboot/netbox/uImage\0"                            \
 168         "kernel_addr=50080000\0"                                        \
 169         "ramdisk_addr=50200000\0"                                       \
 170         "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0"                \
 171         "update=protect off 50000000 5007dfff;era 50000000 5007dfff;"   \
 172                 "cp.b 100000 50000000 ${filesize};"                     \
 173                 "setenv filesize;saveenv\0"                             \
 174         "upd=run load update\0"                                         \
 175         "ipaddr=10.0.0.233\0"                                           \
 176         "serverip=10.0.0.152\0"                                         \
 177         "netmask=255.255.0.0\0"                                         \
 178         "ethaddr=c6:6f:13:36:f3:81\0"                                   \
 179         "eth1addr=c6:6f:13:36:f3:82\0"                                  \
 180         "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env),"           \
 181         "4k@508k(renv)\0"                                               \
 182         ""
 183 #define CONFIG_BOOTCOMMAND      "run net_nfs"
 184
 185 /*
 186  * Physical Memory Map
 187  */
 188 #define CONFIG_NR_DRAM_BANKS    1          /* we have 1 bank of DRAM */
 189 #define PHYS_SDRAM_1            0x00000000 /* SDRAM Bank #1 */
 190 #define PHYS_SDRAM_1_SIZE       0x02000000 /* 32 MB */
 191
 192 #define CONFIG_SYS_FLASH_BASE          0x50000000
 193 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 194 #if defined(CONFIG_SCPU)
 195 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* Reserve 512 kB for Monitor   */
 196 #else
 197 #define CONFIG_SYS_MONITOR_LEN          (504 << 10)     /* Reserve 512 kB for Monitor   */
 198 #endif
 199
 200 /*
 201  * Expansion bus settings
 202  */
 203 #if defined(CONFIG_SCPU)
 204 #define CONFIG_SYS_EXP_CS0              0x94d23C42      /* 8bit, max size               */
 205 #else
 206 #define CONFIG_SYS_EXP_CS0              0x94913C43      /* 8bit, max size               */
 207 #endif
 208 #define CONFIG_SYS_EXP_CS1              0x85000043      /* 8bit, 512bytes               */
 209
 210 /*
 211  * SDRAM settings
 212  */
 213 #define CONFIG_SYS_SDR_CONFIG           0x18
 214 #define CONFIG_SYS_SDR_MODE_CONFIG      0x1
 215 #define CONFIG_SYS_SDRAM_REFRESH_CNT    0x81a
 216
 217 /*
 218  * FLASH and environment organization
 219  */
 220 #if defined(CONFIG_SCPU)
 221 #define CONFIG_SYS_FLASH_CFI                            /* The flash is CFI compatible  */
 222 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver        */
 223 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT /* no byte writes on IXP4xx     */
 224 #endif
 225
 226 #define FLASH_BASE0_PRELIM      CONFIG_SYS_FLASH_BASE           /* FLASH bank #0        */
 227
 228 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 229 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip    */
 230
 231 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 232 #define CONFIG_SYS_FLASH_WRITE_TOUT     1000    /* Timeout for Flash Write (in ms)      */
 233
 234 #define CONFIG_SYS_FLASH_WORD_SIZE      unsigned char   /* flash word size (width)      */
 235 #define CONFIG_SYS_FLASH_ADDR0          0x5555  /* 1st address for flash config cycles  */
 236 #define CONFIG_SYS_FLASH_ADDR1          0x2AAA  /* 2nd address for flash config cycles  */
 237 /*
 238  * The following defines are added for buggy IOP480 byte interface.
 239  * All other boards should use the standard values (CPCI405 etc.)
 240  */
 241 #define CONFIG_SYS_FLASH_READ0          0x0000  /* 0 is standard                        */
 242 #define CONFIG_SYS_FLASH_READ1          0x0001  /* 1 is standard                        */
 243 #define CONFIG_SYS_FLASH_READ2          0x0002  /* 2 is standard                        */
 244
 245 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 246
 247 #define CONFIG_ENV_IS_IN_FLASH  1
 248
 249 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 250 #if defined(CONFIG_SCPU)
 251 /* no redundant environment on SCPU */
 252 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector          */
 253 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 254 #else
 255 #define CONFIG_ENV_SECT_SIZE    0x1000  /* size of one complete sector          */
 256 #define CONFIG_ENV_SIZE         0x1000  /* Total Size of Environment Sector     */
 257
 258 /* Address and size of Redundant Environment Sector     */
 259 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 260 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 261 #endif
 262
 263 #if !defined(CONFIG_SCPU)
 264 /*
 265  * NAND-FLASH stuff
 266  */
 267 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 268 #define CONFIG_SYS_NAND_BASE            0x51000000      /* NAND FLASH Base Address */
 269 #endif
 270
 271 /*
 272  * GPIO settings
 273  */
 274
 275 /* FPGA program pin configuration */
 276 #define CONFIG_SYS_GPIO_PRG             12              /* FPGA program pin (cpu output)*/
 277 #define CONFIG_SYS_GPIO_CLK             10              /* FPGA clk pin (cpu output)    */
 278 #define CONFIG_SYS_GPIO_DATA            14              /* FPGA data pin (cpu output)   */
 279 #define CONFIG_SYS_GPIO_INIT            13              /* FPGA init pin (cpu input)    */
 280 #define CONFIG_SYS_GPIO_DONE            11              /* FPGA done pin (cpu input)    */
 281
 282 /* other GPIO's */
 283 #define CONFIG_SYS_GPIO_RESTORE_INT     0
 284 #define CONFIG_SYS_GPIO_RESTART_INT     1
 285 #define CONFIG_SYS_GPIO_SYS_RUNNING     2
 286 #define CONFIG_SYS_GPIO_PCI_INTA        3
 287 #define CONFIG_SYS_GPIO_PCI_INTB        4
 288 #define CONFIG_SYS_GPIO_I2C_SCL 6
 289 #define CONFIG_SYS_GPIO_I2C_SDA 7
 290 #define CONFIG_SYS_GPIO_FPGA_RESET      9
 291 #define CONFIG_SYS_GPIO_CLK_33M 15
 292
 293 /*
 294  * I2C stuff
 295  */
 296
 297 /* enable I2C and select the hardware/software driver */
 298 #undef  CONFIG_HARD_I2C                 /* I2C with hardware support    */
 299 #define CONFIG_SOFT_I2C         1       /* I2C bit-banged               */
 300
 301 #define CONFIG_SYS_I2C_SPEED            83000   /* 83 kHz is supposed to work   */
 302 #define CONFIG_SYS_I2C_SLAVE            0xFE
 303
 304 /*
 305  * Software (bit-bang) I2C driver configuration
 306  */
 307 #define PB_SCL          (1 << CONFIG_SYS_GPIO_I2C_SCL)
 308 #define PB_SDA          (1 << CONFIG_SYS_GPIO_I2C_SDA)
 309
 310 #define I2C_INIT        GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SCL)
 311 #define I2C_ACTIVE      GPIO_OUTPUT_ENABLE(CONFIG_SYS_GPIO_I2C_SDA)
 312 #define I2C_TRISTATE    GPIO_OUTPUT_DISABLE(CONFIG_SYS_GPIO_I2C_SDA)
 313 #define I2C_READ        ((*IXP425_GPIO_GPINR & PB_SDA) != 0)
 314 #define I2C_SDA(bit)    if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SDA);      \
 315                         else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SDA)
 316 #define I2C_SCL(bit)    if (bit) GPIO_OUTPUT_SET(CONFIG_SYS_GPIO_I2C_SCL);      \
 317                         else     GPIO_OUTPUT_CLEAR(CONFIG_SYS_GPIO_I2C_SCL)
 318 #define I2C_DELAY       udelay(3)       /* 1/4 I2C clock duration */
 319
 320 /*
 321  * I2C RTC
 322  */
 323 #if 0 /* test-only */
 324 #define CONFIG_RTC_DS1340       1
 325 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 326 #else
 327 /* M41T11 Serial Access Timekeeper(R) SRAM */
 328 #define CONFIG_RTC_M41T11       1
 329 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 330 #define CONFIG_SYS_M41T11_BASE_YEAR     1900    /* play along with the linux driver */
 331 #endif
 332
 333 /*
 334  * Spartan3 FPGA configuration support
 335  */
 336 #define CONFIG_SYS_FPGA_MAX_SIZE        700*1024        /* 700kByte for XC3S500E        */
 337
 338 #define CONFIG_SYS_FPGA_PRG     (1 << CONFIG_SYS_GPIO_PRG)      /* FPGA program pin (cpu output)*/
 339 #define CONFIG_SYS_FPGA_CLK     (1 << CONFIG_SYS_GPIO_CLK)      /* FPGA clk pin (cpu output)    */
 340 #define CONFIG_SYS_FPGA_DATA    (1 << CONFIG_SYS_GPIO_DATA)     /* FPGA data pin (cpu output)   */
 341 #define CONFIG_SYS_FPGA_INIT    (1 << CONFIG_SYS_GPIO_INIT)     /* FPGA init pin (cpu input)    */
 342 #define CONFIG_SYS_FPGA_DONE    (1 << CONFIG_SYS_GPIO_DONE)     /* FPGA done pin (cpu input)    */
 343
 344 /*
 345  * Cache Configuration
 346  */
 347 #define CONFIG_SYS_CACHELINE_SIZE       32
 348
 349 #endif  /* __CONFIG_H */