]> git.ipfire.org Git - thirdparty/u-boot.git/blob - include/configs/platinum.h
Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig
[thirdparty/u-boot.git] / include / configs / platinum.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3 * Copyright (C) 2014, Barco (www.barco.com)
4 */
5
6 #ifndef __PLATINUM_CONFIG_H__
7 #define __PLATINUM_CONFIG_H__
8
9 /* SPL */
10
11 /* Location in NAND to read U-Boot from */
12 #define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
13
14 #include "imx6_spl.h" /* common IMX6 SPL configuration */
15 #include "mx6_common.h"
16
17 /*
18 * Hardware configuration
19 */
20
21 /* UART config */
22 #define CONFIG_MXC_UART
23 #define CONFIG_MXC_UART_BASE UART1_BASE
24
25 /* I2C config */
26 #define CONFIG_SYS_I2C
27 #define CONFIG_SYS_I2C_MXC
28 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
29 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
30 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
31 #define CONFIG_SYS_I2C_SPEED 100000
32
33 /* MMC config */
34 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
35 #define CONFIG_SYS_FSL_USDHC_NUM 1
36
37 /* Ethernet config */
38 #define CONFIG_FEC_MXC
39 #define IMX_FEC_BASE ENET_BASE_ADDR
40
41 /* USB config */
42 #define CONFIG_MXC_USB_PORT 1
43 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
44 #define CONFIG_MXC_USB_FLAGS 0
45
46 /* Memory config */
47 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
48 #ifndef PHYS_SDRAM_SIZE
49 #define PHYS_SDRAM_SIZE (1024 << 20)
50 #endif
51
52 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
53 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
54 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
55
56 #define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
57 GENERATED_GBL_DATA_SIZE)
58 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
59 CONFIG_SYS_INIT_SP_OFFSET)
60
61 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
62
63 #ifdef CONFIG_CMD_NAND
64
65 /* NAND config */
66 #ifndef CONFIG_SYS_NAND_MAX_CHIPS
67 #define CONFIG_SYS_NAND_MAX_CHIPS 2
68 #endif
69 #define CONFIG_SYS_MAX_NAND_DEVICE 1
70 #define CONFIG_SYS_NAND_BASE 0x40000000
71 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
72 #define CONFIG_SYS_NAND_ONFI_DETECTION
73
74 /* DMA config, needed for GPMI/MXS NAND support */
75
76 /* Environment in NAND */
77 #define CONFIG_ENV_OFFSET (16 << 20)
78 #define CONFIG_ENV_SECT_SIZE (128 << 10)
79 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
80 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
81 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
82
83 #else /* CONFIG_CMD_NAND */
84
85 /* Environment in MMC */
86 #define CONFIG_ENV_SIZE (8 << 10)
87 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
88 #define CONFIG_SYS_MMC_ENV_DEV 0
89
90 #endif /* CONFIG_CMD_NAND */
91
92 /*
93 * U-Boot configuration
94 */
95
96 /* Board startup config */
97
98 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
99 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
100 PHYS_SDRAM_SIZE - (12 << 20))
101
102 #define CONFIG_BOOTCOMMAND "run bootubi_scr"
103
104 /* Miscellaneous configurable options */
105
106 /* MTD/UBI/UBIFS config */
107
108 /*
109 * Environment configuration
110 */
111
112 #if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
113 #define CONFIG_COMMON_ENV_UBI \
114 "setubipartition=env set ubipartition ubi\0" \
115 "setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
116 #elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
117 #define CONFIG_COMMON_ENV_UBI \
118 "setubipartition=env set ubipartition ubi$boot_vol\0" \
119 "setubirfs=env set ubirfs ubi0:rootfs\0"
120 #endif
121
122 #define CONFIG_COMMON_ENV_MISC \
123 "user=user\0" \
124 "project="CONFIG_PLATINUM_PROJECT"\0" \
125 "uimage=uImage\0" \
126 "dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
127 "serverip=serverip\0" \
128 "memaddrlinux=0x10800000\0" \
129 "memaddrsrc=0x11000000\0" \
130 "memaddrdtb=0x12000000\0" \
131 "console=ttymxc0\0" \
132 "baudrate=115200\0" \
133 "boot_scr=boot.uboot\0" \
134 "boot_vol=0\0" \
135 "mtdids="CONFIG_MTDIDS_DEFAULT"\0" \
136 "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
137 "mmcfs=ext2\0" \
138 "mmcrootpart=1\0" \
139 \
140 "setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
141 "settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
142 "settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
143 "setubifilelinux=env set ubifilelinux boot/$uimage\0" \
144 "setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
145 "setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
146 "setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
147 "setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
148 \
149 "loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
150 "loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
151 "loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
152 "loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
153 "loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
154 "$mmcfilelinux\0" \
155 "loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
156 "$mmcfiledtb\0" \
157 \
158 "ubipart=ubi part $ubipartition\0" \
159 "ubimount=ubifsmount $ubirfs\0" \
160 \
161 "setbootargscommon=env set bootargs $bootargs " \
162 "console=$console,$baudrate enable_wait_mode=off\0" \
163 "setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
164 "setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
165 "setbootargsubirfs=env set bootargs $bootargs " \
166 "ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
167 "setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
168 "nfsroot=$serverip:$nfspath,v3,tcp\0" \
169 "setbootargsmmcrfs=env set bootargs $bootargs " \
170 "root=$mmcrootdev rootwait rw\0" \
171 \
172 "bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
173 "setbootargscommon setbootargsmtd setbootargsdhcp " \
174 "setbootargsnfsrfs;" \
175 "run loadtftpkernel loadtftpdtb;" \
176 "bootm $memaddrlinux - $memaddrdtb\0" \
177 "bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
178 "run setubipartition setubirfs;" \
179 "run setbootargscommon setbootargsmtd " \
180 "setbootargsubirfs;" \
181 "run loadtftpkernel loadtftpdtb;" \
182 "bootm $memaddrlinux - $memaddrdtb\0" \
183 "bootubi=run setubipartition setubirfs setubifilelinux " \
184 "setubipfiledtb;" \
185 "run setbootargscommon setbootargsmtd " \
186 "setbootargsubirfs;" \
187 "run ubipart ubimount loadubikernel loadubidtb;" \
188 "bootm $memaddrlinux - $memaddrdtb\0" \
189 "bootubi_scr=run setubipartition setubirfs;" \
190 "run ubipart ubimount;" \
191 "if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
192 "then source ${memaddrsrc}; else run bootubi; fi\0" \
193 "bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
194 "setbootargscommon setbootargsmmcrfs;" \
195 "run loadmmckernel loadmmcdtb;" \
196 "bootm $memaddrlinux - $memaddrdtb\0" \
197 \
198 "bootcmd="CONFIG_BOOTCOMMAND"\0"
199
200 #define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
201 CONFIG_COMMON_ENV_UBI
202 #endif /* __PLATINUM_CONFIG_H__ */